Transport And Unpacking The Appliance - BOMANN KGC 213 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

• Use the provided collection points of electrical equipment for the disposal of the

appliance.

Coolant

WAR

WARNING

WAR

NING

NING: : : :

The coolant circuit of this appliance contains the refrigerant Isobutane (R600a), a natural gas that is flamma-

ble and of high environmental compatibility. Make sure no parts of the coolant circuit get damaged during

transport and installation of the appliance.

If the coolant circuit is damaged:

• avoid any open flames or ignition source,

• disconnect the plug,

Transport the appliance

Transport the appliance, if possible, only in vertical position. Otherwise, it is absolutely necessary to allow the

appliance standing upright for a few hours before installation "Prior to first use". Protect the appliance during

transport against weather influences.

The appliance has wheels which facilitate the transport and installation of the appliance. Tilt the appliance

back slightly and move it gently.

Unpack the

Unpack the a a a a ppliance

Unpack the

ppliance

• Remove the appliance from its packaging.

• Remove all packaging material, such as foils, filler and cardboard packaging.

• To prevent hazards, check the appliance for any transport damage.

• In case of damage, do not put the appliance into operation. Contact your distributor.

NOTE: : : : Transport protection!

NOTE

Transport protection!

NOTE

Transport protection!

• The appliance and the interior fittings are protected for transport. Remove all tapes and take out the red

transport supports.

• When you open the freezer door a red small part falls out.

NOTE: : : :

NOTE

Production residue or dust may have collected on the appliance. We recommend cleaning the appliance ac-

cording to chapter "Cleaning and Maintenance".