Cmpj+, Psr+, Psf+ Joysticks Or Displays - Invacare FDX User Manual

5 Left Park Brake
Fault
6 Right Park
Brake Fault
7 Remote Fault
8 Controller
Fault
9 Communica-
tions Fault
1163181-F~00
Ensure brake lever is in the
drive position before turning
on the wheelchair. Ensure
motor cable is plugged into
the controller.
Contact Invacare/Dealer for
service.
Ensure brake lever is in the
drive position before turning
on the wheelchair. Ensure
motor cable is plugged into
the controller.
Contact Invacare/Dealer for
service.
Check to make sure joystick
is connected properly. Turn
Joystick off then on.
Contact Invacare/Dealer for
service.
Contact Invacare/Dealer for
service.
Check joystick cable
connections. Check joystick
cable and connectors for
damage.
Contact Invacare/Dealer for
service.
10 General Fault
11 Incompatible
or incorrect
Remote

8.2.2 CMPJ+, PSR+, PSF+ Joysticks or Displays

Error codes are displayed in the Fault Log on the hand help
programmer.
SYMPTOM PROBABLE
LEFT BRAKE Motor lock levers
disengaged (Error
FAULT or RIGHT
BRAKE FAULT code E9 or E10).
displays and
wheelchair does
not drive.
CHARGER Battery charger
PLUGGED IN connected (Error
displays. code E28).
Troubleshooting
Contact Invacare/Dealer for
service.
Wrong type of remote
connected. Contact
Invacare/Dealer for service.
CAUSE SOLUTIONS
Engage motor lock
levers. Refer to Dis-
engaging/Engaging
Motor Lock Levers.
Unplug battery
charger from the
wheelchair. Refer to
Charging Batteries.
71