Invacare FDX User Manual page 45

User Settings
SET DATE AND TIME - Sets the clock on the
Set Date
CMPJ+ joystick. Adds date and time stamp to
and Time
error codes.
•
Move the joystick Up or Down to change
the highlighted value (hour, minute, AM/PM,
month, day, year)
•
Move the joystick Right or Left to select a
value or the Set icon.
•
Highlight the Set icon and move the joystick
forward to enter new date and time.
Battery BATTERY VOLTAGE - Displays current battery
Voltage voltage. This is a diagnostic test a user can
perform prior to a service call.
Fault Code FAULT CODES - Displays time and date stamped
fault codes. This information can be helpful to a
provider prior to making a service call.
CONNECTED DEVICES - Displays device
Connected
connections.
Devices
Connected Devices Screen
This screen is displayed if the Mode Select switch is held active for
about 10 seconds. This screen shows an icon that represents any
additional devices that are connected to the chair
1163181-F~00
ICON DESCRIPTION
Intelligent Tilt
Actuator
Intelligent Recline
Actuator
Intelligent Center
Leg Actuator
Elevate Actuator
Generic Tilt
Actuator
Generic Recline
Actuator
Generic Leg
Actuator
Generic Right Leg
Actuator
Generic Left Leg
Actuator
Intelligent CG Tilt
Wheelchair Operation
ICON DESCRIPTION
RIM Control
ECU 1/2 and ECU
3/4
Proportional
Attendant Control
Compact Joystick
Sip and Puff
Control
Digital Attendant
Control
Micro Extremity
Control
Peachtree Control
ASL Digital Control
Generic Analog
Control
45