To Clear Tracks From The Program; Auto Space Function - Kenwood CD-206 Instruction Manual

To clear tracks from the program

16
CD-206/DPF-R6010
REMOTE CONTROL UNIT
RC-P0601
CD-204/203/DPF-R4010/R3010
To program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only)
1
2
3

Auto space function

During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By record-
ing tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
Time display on CD player (TIME DISP.)
Each press of the TIME DISP. (TIME DISPLAY) key changes
the displayed contents.
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
Press to clear tracks from the end.
CLEAR
CLEAR
To clear all tracks
P.MODE
Press so that the "PGM" indicator lights.
P.MODE
Select the desired disc.
DISC 1 DISC 2 DISC 3 DISC 4
Press the P. MODE key again.
P.MODE
Do this operation in the play mode.
TIME DISP.
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
÷ Selected tracks can be also completely cleared just by operating the 0
key.
÷ The entire program is cleared.
DISC 5
÷ Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
CD-206/DPF-R6010
1
1:23 : Elapsed time of track being played
2
-2:23 : Remaining time of track being played
3 23:45T : Elapsed time of entire disc (T lights up.)
4 -36:25T : Remaining time on entire disc (T lights up.)
CD-204/203/DPF-R4010/R3010
1
1:23 : Elapsed time of track being played (SINGLE lights up.)
2
-2:23 : Remaining time of track being played (SINGLE lights
3
23:45 : Elapsed time of entire disc (TOTAL lights up.)
4
-36:25 : Remaining time on entire disc (TOTAL lights up.)
÷ Only the display 1 and 2 will be displayed in PGM, RANDOM and EDIT
modes.
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
ALL indicator lights up.
1 2 3 4
ALL
6 7 8 9
P _ 0 1
up.)
5
10