Multi Edit - Kenwood CD-206 Instruction Manual

Several CDs can be edited and recorded on 1 tape.
Choose songs from each disc, and edit/record while con-
firming the remaining time on files A and B, respectively.

MULTI EDIT

1
Press so that the "MULTI EDIT " indicator light.
2
Enter the recording time of the tape.)
3
Select the desired track.
1
2
4
Start recording.
When recording with a cassette deck equipped with CCRS
function:
Press the CCRS key (Cassette deck).
When recording with a normal cassette deck:
1
2 Press the record key.
3
5
Repeat step 3,4 above.
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
(Except for CD-206/DPF-R6010)
Do this operation in the stop mode.
EDIT
Press twice
Select the disc (one disc only).
DISC 1 DISC 2 DISC 3 DISC 4
Select the tracks to be recorded.
Main unit Remote control unit
4 ¢ 1 2
4 5
« 7 8
P.MODE
0
Adjust the recording levels.
Play the CD.
REMOTE CONTROL UNIT
RC-P0601
: Keys and controls used in the operations described on this page.
DISC 5
÷ If you made a mistake, press the CLEAR key and select the correct
3
track.
÷ The time remaining on side A or side B is indicated on the display.
6
÷ When the time left on side A is less than the play time of the selected
song, that song will be programmed on side B.
9
÷ If "FULL" is displayed, no further programming can be accepted.
+10
÷ With the CCRS function, the recording starts after about 1 minute.
÷ If you have a cassette deck capable of Double-speed recording, use
Normal-speed recording.
÷ Change discs and, if the "b-01" indication is given when you first select
a song, turn the tape to the start of side B.
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
Light up.
PGM MULTI
EDIT DISC
NO.
1 2 3 4 5
Editing
21