Normal Play (Track Mode) - Kenwood CD-206 Instruction Manual

Normal play (TRACK mode)

Use the following procedure to play a CD in the original order
of tracks from track No. 1.
10
Playing tracks in order from track No. 1
1
Check that the unit is in the normal play TRACK
mode.
2
Start playback.
To pause playback
÷ Each press pauses and plays the CD alternately.
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
or
DISC SKIP
CD-206/DPF-R6010
0
Lights up.
6
8
1 2 3
CD-204/203/DPF-R4010/R3010
REMOTE CONTROL UNIT
RC-P0601
: Keys and controls used in the operations described on this page.
!
CD-206/DPF-R6010
If there is no disc in the selected disc tray, the corresponding
indicator "
DISC 5
DISC 1
CD-204/203/DPF-R4010/R3010
If there is no disc in the selected disc tray, the corresponding
indicator "
1 2
÷ Playback starts from the disc selected in order of the DISC No.
÷ When the 3/8 key is pressed without selecting a disc, playback starts
from the indicated DISC No.
CD-206/DPF-R6010
Lights up.
0 1
Track NO. being
played
÷ In the case of a CD-TEXT disc, the disc's title is scrolled on the display.
What is then displayed is in accordance with the TEXT DISPLAY mode.
CD-204/203/DPF-R4010/R3010
1 2
Disc indicator
during Playback (∞)
To stop playback
1
4 5
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
" goes off.
DISC 2 DISC 3 DISC 4 DISC 5
Blinks during playback.
" goes off.
DISC REPEAT SINGLE
NO. TRACK NO. TOTAL
1
0 1 2 1 8 :
3 4 5
Elapsed time of track being played
DISC REPEAT SINGLE
NO. TRACK NO. TOTAL
1
0 1 2 1 8 :
3 4 5
Track NO. being Elapsed time of track being played
played
1 2 3 4 5
6 7 8 9 10
1 : 2 3
#
1 2 3 4 5
6 7 8 9 10
7