Table of Contents
Advertisement
Copying
If there is not much remaining capacity in the SD card, a confirmation message asking to copy after
deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
1
Change the mode to
Use a sufficiently charged battery or the AC
adaptor.
2
Select the menu. (F 33)
(When copying from built-in memory to SD card)
[COPY]
[
]
(When copying from SD card to built-in memory)
[COPY]
[
]
When there are relay-recorded scenes in the
built-in memory, a message appears on the
screen. Before copying, store all of the relay
scenes in the SD card. (F 105)
(When copying from HDD to SD card)
[COPY]
[
]
(When copying from SD card to HDD)
[COPY]
[
]
3
Touch the desired item.
[Video&Picture]:
All scenes are copied in order of motion pictures,
then still pictures.
Proceed to step 7.
[VIDEO]:
Motion pictures are copied.
[PICTURE]:
Still pictures are copied.
.
[YES]
[YES]
[YES]
[YES]
4
(Only when [VIDEO]/[PICTURE] is selected
in step 3)
Touch the desired item.
[ALL SCENES]:
All motion pictures or still pictures are copied.
Proceed to step 7.
[SELECT SCENES]:
Some motion pictures or still pictures are
selected for copying.
[SELECT DATE]:
Copy by selecting the date.
5
(Only when [SELECT SCENES] is selected
in step 4)
Touch the scene/still picture to
be copied.
When touched, the scene/still picture is
selected and the
indication appears on the
thumbnail. Touch the scene/still picture again
to cancel the operation.
Up to 99 scenes/still pictures can be set in
succession.
103
VQT1Z09
Advertisement
Table of Contents
