O Copying Your Tapes (Dubbing) .Ccommmcccccnnnnncononcnnnnnnnnnnncnccnnnnnnnnanannncnrrrrnnnnnaaaas - Panasonic Palmcorder PV-L352 Operating Instructions Manual

Copying your Tapes (dubbing)
Connections
STOP PLAY
STILL
Source
(Playing)
To Audio In d To Video In
Recording VCR
Monitor with your TV
e Turn TV on and tune to VCR channel
(CH3 or CH4).
e Set TV/VCR Selector on VCR to VCR.
22 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before you begin...
e Make Camcorder-VCR connections (see left).
e Turn both units on.
e Set VCR input signal to LINE.
Please see VCR owner's manual.
e Set Camcorder POWER to VCR.
1 Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
2 Press PLAY on Camcorder, then press
STILL at starting point.
3 Press
VCR.
REC, then STILL/PAUSE on
4 Press STILL on Camcorder and STILL/
PAUSE on VCR to start copying.
5 Press STOP on both units to stop
copying.
Note:
e Camcorder will only playback tapes
recorded in SP or SLP mode.
e Dubbing may reduce picture quality.
CAUTION:
Unauthorized exchanging and/or copying
of copyrighted recordings may be
copyright infringement.