Table of Contents
Advertisement
Preparation
6
Setup
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
Change the mode to
1
Select the menu. (F 33)
[SETUP]
[CLOCK SET]
2
Touch the date or time to be set,
then set the desired value using
/
.
The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
The 12-hour system is used to display the time.
appears on the right top of the screen
when [SET WORLD TIME] (F 40) is set to
[HOME], while
[DESTINATION].
3
Touch [ENTER].
The clock function starts at [00] seconds.
A message prompting for World time setting
may be displayed. Perform the World time
setting by touching the screen. (F 40)
Touch [EXIT] or press the MENU button to
complete the setting.
Changing the date and time display mode
Select the menu. (F 33)
[SETUP]
[DATE/TIME]
style
You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
Setting date and time
or
.
[YES]
appears when it is set to
desired display
[DATE]
[D/T]
NOV 15 2009
[OFF]
Changing the date format
Select the menu. (F 33)
[SETUP]
[DATE FORMAT]
display style
Display style
[Y/M/D]
[M/D/Y]
[D/M/Y]
The date and time function is driven by a built-
in lithium battery.
If the time display becomes [- -], the built-in
lithium battery needs to be charged. To
recharge the built-in lithium battery, connect
the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours
and the battery will maintain the date and time
for approx. 6 months. (The battery is still being
recharged even if the power is off.)
12:34PM
NOV 15 2009
desired
Screen display
2009. 11. 15
NOV 15 2009
15. 11. 2009
39
VQT1Z09
Advertisement
Table of Contents
