Panasonic U-4LE1E5 Service Manual page 81

2. Detailed Settings Function 2. Detailed Settings Function
<Procedure of CZ-RTC3>
Stop the system before performing these steps.
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
2 Press the or
menu.
If you wish to see the next screen instantly, press
the or
Select "8. Detailed settings" on the LCD display
and press the
Maintenance func
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Sel.
The "Detailed settings" screen appears on the
LCD display.
3 Select the "Unit no." by pressing the
button for changes.
Detailed settings
Unit no.
1-1
Sel. Next
4 Select the "Code no." by pressing the
button.
Change the "Code no." to "5D" by pressing the
button ( or keeping it pressed ) .
or
, and
20:30 (THU)
Page [ ] Confirm
button to see each
button.
button.
20:30 (THU)
Page [ ] Confirm
or
20:30 (THU)
Code no. Set data
10 0001
or
Detailed settings
Unit no.
1 1 -
Sel.
5 Select the "Set data" by pressing the
button.
Select one of the "Set data" in "Table for DC Fan
Motor Tap Setting (Table 1 – Table 3)" by pressing
or
the
Then press the
Detailed settings
Unit no.
1-1
Sel.
6 Press the
The "Exit detailed settings and restart?" (Detailed
setting-end) screen appears on the LCD display.
Select "YES" and press the
Detailed settings
Unit no.
ALL
Sel.
* If air-blocking material is used, use same
procedure as in steps
change the setting for Code no."62" to "0000".
If you wish to change the selected indoor unit,
follow the step
4 - 19
Mini VRF SYSTEM
Remote Controller Functions
2WAY SYSTEM
Remote Controller Functions
20:30 (THU)
Code no. Set data
5D 0 0 1 0
Next
button.
button.
20:30 (THU)
Code no. Set data
5D 0003
[ ] Confirm
button.
button.
20:30 (THU)
Exit detailed settings
Code no. Set data
and restart?
01 0002
YES NO
Next
6
3 - above and
.
2
or
4