Nfasoft - Gigahertz Solutions NFA 1000 Operating Manual

7 „NFAsoft"
The provided software allows ...
 for the analysis of the data logged by the NFA
 for the configuration of the NFA according to your preferences and habits.
System requirements
NFAsoft is compatible with Windows XP and above, or LINUX. NFAsoft requires no
installation – just double-click and start!
In some cases, it might be necessary to temporarily disable your anti-virus
software. Anti-virus software may interpret NFAsoft as a threat and hence might
disable or even erase it. It may be necessary to repeat this upon loading an upgrad-
ed version of NFAsoft. NFAsoft can be loaded and executed directly form the SD
memory card through a card reader or through the USB interface cable. The NFA is
supplied with a "Class 6 SDHC"-SD memory card (appropriate readers have been
available since 2008, adapters are available for older computers).
7.1 Data Analysis: File Types
A click on the button
The following file types are available (the consecutive numbering is independent
from the file type)
 LOG00001.TXT
 LOG00002.9PM
 LOG00003.6PM
 REC00004.WAV
350-027_NFA1000400-6-2_EN-von-susanne as of October 2011
A double-click on the program-icon
shown on the left. Here you can chose between the tool for
the analysis of the data
configuration of your NFA
The software is subject to continuous upgrade. The most
current revision can always be found for download on our
homepage.
opens the program and a Windows-box for file selection.
log file (long time recording)
9-Point-Measurement (sleeping area)
6-Point-Measurement (workplace)
audio file (recorded note).
- 20 -
opens the window
and the tool for the user-specific
.
© Gigahertz Solutions GmbH