Nfasoft - Gigahertz Solutions NFA 30M Operating Manual

Made in Germany
7 „NFAsoft"
The provided software allows ...
 for the analysis of the data logged by the NFA
 for the configuration of the NFA according to your preferences and habits.
System requirements
NFAsoft ismade for Windows (98 and up higher). Linux and Mac versions are pro-
vided "as is". NFAsoft requires no installation – just double-click and start!
In some cases, it might be necessary to temporarily disable your anti-virus
software. Anti-virus software may interpret NFAsoft as a threat and hence might
disable or even erase it. It may me necessary to repeat this when a upgraded ver-
sion of NFAsoft is loaded. NFAsoft can be loaded and executed directly form the SD
memory card through a card reader or through the USB interface cable. The NFA is
supplied with a „Class 6 SDHC"-SD memory card (appropriate readers have been
available since 2008, adapters are available for older computers).
7.1 Data Analysis
Double click the appropriate log file for analysis and the following window will open:
February 2016
A double-click on the program-icon
shown on the left. Here you can chose between the tool for
the analysis of the data
configuration of your NFA
The software is subject to continuous upgrade. The most
current revision can always be found for download on our
homepage.
 The far left column labelled "Channels"
shows statistic evaluations of the different
frequencies or frequency ranges.
 The large area on the right shows the plot
of the collected data over the time.
 The values on the left are always the real-
time values of the timeline selected in the
plot.
- 8 -
opens the window
and the tool for the user-specific
.
© Gigahertz Solutions GmbH