Gigahertz Solutions NFA 1000 Operating Manual page 25

Convert Units
This function can be used to display whichever values recorded via the AC/DC input
port directly in its original unit. This way, an HF-recording can be shown either in
µW/m² or V/m. A new channel will autmatically be generated, thus avoiding any po-
tential loss of data.
More help to be provided in future revisions.
Rename or Delete Channel
Allows for a renaming or deleting of the marked channel.
Summarise Channels
The plotted channels (selected on the left) will be added up ("square sum") and add-
ed as a new channel. The sum of 100/120 Hz, 150/180 Hz, R<2kHz and >2kHz are
considered to be the relevant paramters for the evaluation of "dirty electricity".
Extras
The first two items in the dropdown menu have been explained already.
Create KML-File
Required as a plugin for the connection of GPS-data, NFA logs and Google Earth
(currently in its beta phase). Please ask for the current manual by e-mail.
7.3 Data-Analysis:
9-Point-Measurement / 6-Point Measurement
For a graphical illustration of recorded 9-Point-Measurement please double-click the
respective file with the extension ".9PM". The illustration is frequency specific.
Please note that the readings of the channels X, Y and Z as well as "All CH4" are
dependent on the position of the instrument and that the graphical illustration is for
orientation purposes only. "Edit" in the menu offers you the possibility to copy the
illustrations into your report, also individually. The evaluation of the 6-Point-
Measurement is done analogous to the 9-Point-Measurement.
- 25 -
© Gigahertz Solutions GmbH 350-027_NFA1000400-6-2_EN-von-susanne as of October 2011