Gigahertz Solutions NFA 1000 Operating Manual page 14

If the "Mode"-button on the left is on "Band" or "Freq.",
 Press and release the "Mode>" button to select the next frequency band (indi-
cated by the corresponding LEDs), and also the axis per band in the "XYZ"
mode.
 Press and release the "Mode>" and "Rec>" buttons at the same time to display
the individual axis one after the other in an infinite loop until one of the buttons is
pressed again.
"Rec" = Record an audio note
Keep this button pressed and so activate the internal microphone to accept your live
comments. The microphone is positioned above the "Rec." button (marked by the
hole in the casing lid). It is sufficiently sensitive to pick up audio comments from a
few metres distance.
While the "Rec." button is pressed for taking your notes, these will be recorded in a
standard WAV file parallelly to logging value recordings. These audio notes will then
be directly allocated by NFAsoft to the corresponding recording times in the graph-
ic.
4.10 I/O - Microphone / Headset
Allows the connection of a mono headset for dictating or listening to the audio anal-
ysis.
350-027_NFA1000400-6-2_EN-von-susanne as of October 2011
- 14 -
© Gigahertz Solutions GmbH