Intended Use - Bosch AKE 30 LI Original Instructions Manual

Cordless 36 v lithium ion chainsaw featuring syneon chip
Hide thumbs Also See for AKE 30 LI:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
OBJ_BUCH-1275-004.book Page 27 Monday, April 4, 2016 1:04 PM
pervises them or has instructed
them in the safe operation of the
charger and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.
Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Only charge Bosch lithium-ion
batteries with a capacity of 2,0 Ah
or more (20 battery cells or more).
The battery voltage must match
the battery charging voltage of the
charger. Do not charge non-re-
chargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Only charge Bosch lithium-ion batteries. The battery
voltage must match the battery charging voltage of the
charger. Otherwise there is danger of fire and explosion.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery charg-
er. Never open the battery charger yourself. Have repairs
performed only by a qualified technician and only using
original spare parts. Damaged battery chargers, cables and
plugs increase the risk of an electric shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 Do not cover the ventilation slots of the battery charg-
er. Otherwise, the battery charger can overheat and no
longer operate properly.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Bosch Power Tools

Intended Use

The power tool is intended for sawing wood such as wooden
beams, planks, branches, tree trunks, etc., and for sawing of
trees. Cuts can be sawed with or across the grain.
This power tool is not suitable for sawing mineral materials.
Delivery Scope
Carefully remove the power tool from its packaging and check
if the following parts are complete:
– Chain saw
– Cover
– Chain
– Chain bar
– Chain guard
– Saw chain oil
– Operating instructions
Battery and charger are included in certain executions.
When parts are missing or damaged, please contact your
dealer.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Rear handle (insulated gripping surface)
2 Lock-off button for On/Off switch
3 On/Off switch
4 Oil filler cap
5 Front handle (insulated gripping surface)
6 Activation lever for kickback brake (hand guard)
7 Oil level gauge
8 Gripping teeth
9 Chain guard
10 Chain bar
11 Saw chain
12 Locking knob
13 Cover
14 Ventilation slots – outlet
15 Chain tensioning knob
16 Serial number
17 Battery pack
18 Battery unlocking button
19 Button for charge-control indicator
20 Battery charge-control indicator
21 Temperature control indicator
22 Charging compartment
23 Battery charger
24 Red LED indicator on the battery charger
25 Green LED indicator on the battery charger
26 Power plug **
27 Symbol for rotation and cutting direction
English | 27
F 016 L81 531 | (4.4.16)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents