Keeping The Output Volume Unchanged; (Output Volume Thru); Interlinking Multiple Ar-3000Sd Units (Midi Link Mode) - Roland AR-3000SD Reference Manual

3.
Turn the [SELECT] dial to choose Line Thru (OFF or ON),
then press the dial.
4.
Turn the [SELECT] dial to set the Thru Volume (0 to 100%),
then press the dial.
* You can make the setting for Thru Volume only when you have
selected Line Thru "ON. "
5.
Turn the [SELECT] dial to make the setting for Fade Out
(time: 00.5 sec to 59.9 sec), then press the dial.
6.
Turn the [SELECT] dial to make the setting for Fade In
(time: 00.5 sec to 59.9 sec), then press the dial.
* You can make the setting for Fade Out only when you have
selected Line Thru "ON. "
7.
When the prompt appears on the screen, press the
[ENTER] button to enable the settings.
To quit without making the settings, use the [SELECT] dial to
choose "No, " then press the [ENTER] button.
When you're finished making the setting, the display returns to the
setting item selection screen.
8.
Press the [MENU] button.
This ends the setting process and returns you to the usual screen.
* While making the settings, you can go back to the previous
entry position (highlighted) by using the [BACK] (USER) button.
* Pressing the [MENU] button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing "YES" and pressing the [ENTER]
button returns you to the usual screen, discarding any settings
made up to that point.

Keeping the Output Volume Unchanged

(Output Volume Thru)

This deactivates the OUTPUT VOLUME knob and keeps the output
volume level unchanged to prevent accidental operation.
* The OUTPUT VOLUME knob can still be used to adjust the
headphones volume and MONO OUT ("Control Input/Output
Terminals" Owner's Manual: p. 27) even when Volume Thru is set
to "ON. "
OFF: The Output Volume control is effective.
ON: The Output Volume control is deactivated.
MEMO
When Volume Thru is set to "ON, " the volume is fixed at the level
obtained when the control is centered (that is, when positioned
at 12 o'clock).
Other Useful Functions During Phrase Playback
Procedure for making the output volume thru setting
1.
Press the [MENU] button.
The MENU indicator lights up.
2.
Use the [SELECT] dial to choose "9.3 Output Vol. Thru,"
then press the dial.
3.
Turn the [SELECT] dial to choose Volume Thru (OFF or ON),
then press the dial.
4.
When the prompt appears on the screen, press the
[ENTER] button to enable the settings.
To quit without making the settings, use the [SELECT] dial to
choose "NO, " then press the [ENTER] button.
When you're finished making the setting, the display returns to the
setting item selection screen.
5.
Press the [MENU] button.
This ends the setting process and returns you to the usual screen.
* Pressing the [MENU] button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing "YES" and pressing the [ENTER]
button returns you to the usual screen, discarding any settings
made up to that point.
Interlinking Multiple AR-3000SD Units
(MIDI LINK Mode)
This uses MIDI System Exclusive (SysEx) messages and MIDI
Machine Control (MMC) to interlink recording and playback on
multiple AR-3000SD units.
When the MIDI Link Mode is set to MASTER, AR-3000SD
automatically set the MIDI Output as OUT and MMC Mode as
MASTER. The respective parameter settings are ignored.
When the MIDI Link Mode is set to SLAVE, AR-3000SD automatically
set the MIDI Output as THRU and MMC Mode as SLAVE. The
respective parameter settings are ignored.
Also, use the same value for the MIDI device IDs of AR-3000SD units
interlinked via MIDI LINK.
55