Copying Just The Settings (Setting Copy); Protecting A Card (Card Protect) - Roland AR-3000SD Reference Manual

Copying Just the Settings (Setting Copy)

This copies the following setting information stored on a card
between a CF card and an SD card.
5 Control input settings
5 MIDI settings
5 RS-232C settings
5 System settings
NOTE
You cannot copy settings to a card that has a different format
(that is, you cannot copy settings from a card in AR-2000 format
to a card in AR-3000 format, or vice versa).
Setting copy procedure
Insert the card to copy from into one slot and the card to copy to
into the other slots.
1.
Press the [MENU] button.
The MENU indicator lights up.
2.
Use the [SELECT] dial to choose "4.4 Setting Copy," then
press the dial.
3.
Turn the [SELECT] dial to choose the setting copy method,
then press the dial.
Command Explanation
A CF 0 B SD
This copies the contents of a CF card to an SD card.
B SD 0 A CF
This copies the contents of an SD card to a CF card.
4.
When the prompt appears on the screen, press the
[ENTER] button to enable the settings.
To quit without making the settings, use the [SELECT] dial to
choose "NO, " then press the [ENTER] button.
When the operation ends, the display returns to the setting item
selection screen.
5.
Press the [MENU] button.
This ends the setting process and returns you to the usual screen.
* Pressing the [MENU] button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing "YES" and pressing the [ENTER]
button returns you to the usual screen, discarding any settings
made up to that point.
Making Settings and Edits for Individual Cards

Protecting a Card (Card Protect)

This prohibits such card operations as saving, overwriting, deleting,
and editing. (However, playback and copying phrases to another
card are still possible.)
Procedure for making the card protect setting
1.
Press the [MENU] button.
The MENU indicator lights up.
2.
Use the [SELECT] dial to choose "4.5 Card Protect," then
press the dial.
3.
Turn the [SELECT] dial to choose the card you want to
protect (CF or SD), then press the dial.
4.
Turn the [SELECT] dial to choose Card Protect (OFF or ON),
then press the dial.
5.
When the prompt appears on the screen, press the
[ENTER] button to enable the settings.
To quit without making the settings, use the [SELECT] dial to
choose "NO, " then press the [ENTER] button.
When you're finished making the setting, the display returns to the
setting item selection screen.
6.
Press the [MENU] button.
This ends the setting process and returns you to the usual screen.
* While making the settings, you can go back to the previous
entry position (highlighted) by using the [BACK] (USER) button.
* Pressing the [MENU] button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing "YES" and pressing the [ENTER]
button returns you to the usual screen, discarding any settings
made up to that point.
19