The Back Side Of The Paper Is Dirty - Canon ipf6350 User Manual

Cause
You are using a paper that
does not dry easily.

The back side of the paper is dirty

The Platen has become dirty after borderless printing or printing
on small paper.
The Paper Retainer is soiled.
Roller marks are left across the trailing edge of paper
The paper was removed without pressing the OK
button after printing from the Front Paper Feed Slot.
Immediately after borderless printing, the trailing edge margin is soiled during regular
printing
Cause
Depending on your printing environment, af-
ter borderless printing in which the leading
and trailing edge of the roll is cut automatical-
ly, any ink adhering to the cutter unit may rub
off on the next printed document.
Printed colors are inaccurate
Color adjustment has not been activated in the Advanced Settings
of the printer driver.
iPF6350
When paper that does not dry easily is used for printing, it may curl during printing
and touch the Output Tray.
In this case, in the Control Panel menu, set Scan Wait Time to an option other than
Off.
However, note that printing will now take longer.
(See "Menu Settings.")
Cause
Cause
Follow these steps to change the Between Pages setting of Drying
Time to a value between about 30 seconds and 3 minutes before try-
ing borderless printing again.
1. On the Main sheet of the printer driver, click Advanced Settings
by Media Type.
2. Select an ink drying time in the list for the Between Pages setting
of Drying Time.
Cause
Troubleshooting > Problems with the printing quality
Corrective Action
→P.894
Corrective Action
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")
Clean the Paper Retainer.
(See "Cleaning Inside the Top Cover.")
Corrective Action
Following the instructions displayed, press the OK button, and
after removing the paper, press the OK button again.
Wipe the rollers to clean them.
(See "Cleaning Inside the Top Cover.")
(See "Cleaning the Paper Retainer.")
Corrective Action
Corrective Action
In the Advanced Settings of the printer driver,
access Color Settings in Color Mode to adjust
colors.
→P.991
→P.991
→P.991
→P.994
The back side of the paper is dirty
>
12
1021