Printing Does Not Start; The Data Reception Lamp On The Control Panel Does Not Light Up; The Printer Does Not Respond Even If Print Jobs Are Sent - Canon ipf6350 User Manual

Printing does not start

The Data Reception Lamp on the Control Panel does not light up ............................................................... 1015

The printer does not respond even if print jobs are sent ............................................................................... 1015

Ink Filling.. is displayed .................................................................................................................................. 1015
The display screen indicates Agitating .......................................................................................................... 1016
The Data Reception Lamp on the Control Panel does not light up
Cause
The printer is not on.
The printer is not selected in the
printer driver. (The printer is in
Sleep mode.)
The print job is paused. (The print-
er is in Sleep mode.)
The printer does not respond even if print jobs are sent
Cause
In the Control Panel menu, Pause Print is
On.
You have selected Save in mail box in
Output Method on the printer.
Print jobs are pending.
Ink Filling.. is displayed
Cause
The printer was forced off during oper-
ation.
iPF6350
Make sure the power cord is securely plugged in, all the way. Press the Power
button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the print-
ing dialog box and try printing again.
In Mac OS X, select the printer by clicking Printer Setup Utility (or Print Cen-
ter ) and try printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers ) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility in some ver-
sions of Mac OS X.)
2. Select the printer, and then Start Jobs in the Printers menu to restart the print
job.
Set Pause Print to Off.
(See "Pausing Printing.")
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
→P.722
Wait until the system has been filled with ink. This process may take about
12 minutes.
The Data Reception Lamp on the Control Panel does not light up
Troubleshooting > Printing does not start
Corrective Action
Corrective Action
→P.16
→P.725
Corrective Action
>
12
1015