Canon ipf6350 User Manual page 917

Adjust Feed Adj.
Printer Priori- Quali-
ty ty
Adjust
Length
Adj Far Ed Feed
Cali- Auto Adjust
bra-
tion
Calibration Log
Use Adj. Value
Return Defaults
Main- Head Cleaning
te-
nance
Nozzle Check
Replace P.head
iPF6350
Setting Item
Manual
Ad- A:High
just-
B:Standard/
ment-
Draft
Print
Chang A:High
e Set-
B:Standard/
tings
Draft
Printer Parts
Description, Instructions
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See
"Adjusting Line Length (Adjust Length).")
→P.832
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjust-
mentPrint or the discrepancy that you measured (as
a percentage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
Choose Yes to adjust the feed amount for the trailing
edge.
Choose Yes for automatic adjustment of the adjust-
ment value after a test pattern for color calibration is
printed. The new color calibration adjustment value
is applied in all print jobs.
Check the date when color calibration was executed,
as well as the type of paper used, as shown on the
Display Screen.
Choose Disabled > OK if you prefer not to apply the
color calibration adjustment value in print jobs. The
printer driver settings will be used instead.
Choose Enabled > OK to apply the color calibration
adjustment value in print jobs. However, printer driv-
er settings are given priority.
Clear the color calibration adjustment value and the
execution log.
Clean the Printhead. (See "Cleaning the Print-
head.")
→P.974
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all,
or if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Execute when replacing the Printhead. Follow the in-
structions displayed to complete the required proce-
dure. (See "Replacing the Printhead.")
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
> Control Panel >
→P.830
→P.975
Menu Settings
9
899