Messages Regarding Printheads - Canon ipf6350 User Manual

Error Message >
x printhead error (x is L, R, or not displayed)
Cause
There is a prob-
lem with the
Printhead.
No x printhead (x is L, R, or not displayed)
Cause
No Printhead is
installed.
Execute printhead cleaning.
Cause
The Printhead noz-
zles are clogged.
13
1060
x printhead error (x is L, R, or not displayed)

Messages regarding printheads

Follow these steps to replace the Printhead.
1. Open the Top Cover.
2. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if
Printhead R is displayed. If neither left or right is indicated, replace both Printhead L and Print-
head R with new ones.
(See "Replacing the Printhead.")
Follow these steps to replace the Printhead.
1. Turn off the printer, wait a while, and then turn it on again.
2. Replace the left printhead with a new one if Printhead L is displayed and the right one if Print-
head R is displayed. If neither left or right is indicated, replace both printheads.
(See "Replacing the Printhead.")
Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is dis-
played. If neither left or right is indicated, install both Printhead L and Printhead R.
(See "Replacing the Printhead.")
Follow these steps to clean the Printhead.
1. Stop printing by pressing ▲ or ▼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.")
If this message is still displayed, replace the Printhead.
(See "Replacing the Printhead.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.")
If this message is still displayed, replace the Printhead.
(See "Replacing the Printhead.")
>
Corrective Action
→P.975
→P.975
Corrective Action
→P.975
Corrective Action
→P.974
→P.975
→P.974
→P.975
iPF6350