Table of Contents
Advertisement
5. Follow the procedure in
Driving board
Removing the driving board
1. Follow the procedure in
2. Remove the:
a.
battery
b.
hard drive
c.
optical drive
d.
base cover
3. To remove the driving board:
a. Peel the adhesive tape to access the display assembly cable [1].
b. Disconnect the display assembly cable [2].
c. Peel the adhesive tape to access the I/O cable [3].
d. Disconnect the I/O cable [4].
e. Remove the screws that secure the driving board to the computer [5].
f. Lift the driving board from the computer [6].
Installing the driving board
1. Place the driving board on the computer.
2. Tighten the screws that secure the driving board on the computer.
3. Connect the I/O board cable.
4. Affix the adhesive tape.
5. Connect the display assembly cable
6. Affix the adhesive tape.
7. Install:
a.
base cover
b.
hard drive
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
43
Advertisement
Table of Contents
