Removing The Tape; Turning Off The Power; Disconnecting The Power Cord - Panasonic AG-DVC30 Operating Instructions Manual

Checking the system operations

Removing the tape

1
Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover.
When the cover is fully opened, the cassette
holder pops out automatically.
2
Take out the cassette tape.
3
Press the part marked "PUSH" and close the
cassette holder.
4
Close the cassette cover after the cassette
holder has been completely retracted.
14 (E)
(cont.)
2
OPEN/EJECT
1
3
4
O Check that the camera-recorder's power is
on before sliding the OPEN/EJECT lever.
O Close the cassette cover if you are not
going to insert a cassette tape immediately
after removing another.
O Do not attempt to remove a tape while you
are recording. The cassette cover opens
but recording will continue, allowing outside
light and dust to adversely affect the tape.

Turning off the power

CAMERA
VCR
POWER
Hold down the white button and turn the
POWER lever to the OFF position.
The power is now turned off, and the CAMERA
lamp goes off.

Disconnecting the power cord

2
1
Disconnect the AC cord from the power
outlet.
2
Disconnect the DC cord from the DC input
socket.
3
Disconnect the DC cord and AC cord from
the AC adapter.
3
1
3