Setting The Time Code; Specifying The Time Code - Panasonic AG-DVC30 Operating Instructions Manual

Time data
(cont.)

Setting the time code

Perform the settings related to the time code
using the items below on the RECORDING
SETUP screen. (P75, P76)
OTCG
OFIRST REC TC
OTC PRESET
O1394 TC REGEN (the menu items appear in
the VCR mode)

Specifying the time code

You can record a value of your choice as the
initial setting for the time code to be used at the
start of recording.
1
Set the POWER lever to the ON position.
2
Use the menus (P67-P70) to select
"PRESET" as the FIRST REC TC item
setting on the RECORDING SETUP screen.
3
Turn the multi dial to move to the TC
PRESET item.
32 (E)
O In the VCR mode, the settings of the items
listed here cannot be changed if "ON" has
been selected as the 1394 TC REGEN item
setting.
4
Press the multi dial to move 1 to "YES."
5
The screen shown below appears. Use the
multi dial to set the time code.
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM
Turn the multi dial to specify the time code.
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM