Setting The User's Bit - Panasonic AG-DVC30 Operating Instructions Manual

Time data
(cont.)

Setting the user's bit

By setting the user's bit, you can store 8-digit
information (such as the date and time) in the
hexadecimal format on the tape's sub code
track.
The user's bit settings are automatically saved
in the memory and retained even after the
power has been turned off.
1
Set the POWER lever to the ON position.
2
Use the menus (P67-P70) to select "USER"
as the UB MODE item setting on the
RECORDING SETUP screen.
3
Turn the multi dial to move to the UB
PRESET item.
30 (E)
4
Press the multi dial to move 1 to "YES."
5
The screen shown below appears. Set the
user's bit using the multi dial.
SHUTTER/IRIS
VOL/JOG
Turn the multi dial and select the user's bit
characters.
PB.
ZOOM
MENU O Numbers from 0 to 9 and letters from A to
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
Press the multi dial to move to the next digit.
ITEM
F can be used as the characters that
make up the user's bit.
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM