Dell M210X User Manual page 19

1
LAMP warning light
2
TEMP warning light
3
Power
4
Up
adjustment
5
Right
6
IR Receiver
Downloaded From projector-manual.com DELL Manuals
If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 41 and "Guiding Signals" on
page 45.
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 41 and "Guiding Signals" on
page 45.
Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 14 and "Turning Your Projector Off" on
page 14.
/ Keystone Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
/ Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
Point the remote control towards the IR receiver
and press a button.
high
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
Using Your Projector 19