Time; Log; Diagnostic - Planet ADE-3400 User Manual

Hide thumbs Also See for ADE-3400:

Table of Contents

3.8.4. Time

Choose Maintenance > Time and the page shown in the following figure appears. You can configure the system time

manually or get the system time from the time server.

The following table describes the parameters of this page:

Field

System Time

NTP Configuration

State

Server

Server 2

Time Zone

Choose Admin > Log and the page shown in the following figure appears. In this page, you can enable or disable

system log function and view the system log.

In the navigation bar, click Diagnostic. The Diagnostic page displayed contains Ping, Ping6, Traceroute,

Traceroute6, OAM Loopback, ADSL Statistics and Diag-Test.

Set the system time manually.

Select enable or disable NTP function. You need to enable NTP if you want to

configure the parameters of NTP.

Set the primary NTP server manually.

Set the secondary NTP server manually.

Choose the time zone in which area you are from the drop down list.

Description

ADSL2/2+ Router

ADE-3400

Table of Contents