Specifications - Sony super motion hdc4300 Operation Manual

Specifications

HDC4300
General
Power requirements AC 240 V, 1.4 A (max.)
DC 180 V, 1.0 A (max.)
DC 12 V, 9.5 A (max.)
–20 °C to +45 °C (–4 °F to +113 °F)
Operating temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
Mass Approx. 5.0 kg (11 lb 0.37 oz) (Unit only)
Dimensions See page 63.
Imaging element
Imaging element 2/3-inch, 9.8 megapixel, CMOS image
sensor
Method 3-chip, RGB
Effective resolution 4K: 4096 (horizontal) × 2160 (vertical)
QFHD: 3840 (horizontal) × 2160
(vertical)
HD: 1920 (horizontal) × 1080 (vertical)
Electrical characteristics
Sensitivity F8.0 (at 2000 lx, 89.9% reflectivity.
4K/59.94P or HD/59.94P (4×))
Image S/N HD/59.94i: 62 dB
Horizontal resolution 2000 TV lines (4K: screen centered)
5% or higher modulation
Geometric distortion Negligible (not including lens distortion)
Optical system specifications
Spectral system F1.4 prism
Built-in filters Color temperature conversion filters
A: Cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
–: –
ND filters
1: Clear
2: 1/4ND
3: 1/8ND
4: 1/16ND
5: 1/64ND
Input/output connectors
BPU Optical/electrical multi-connector (1)
LENS 12-pin (1)
VF 20-pin (1)
MIC 1 IN XLR 3-pin, female (1)
AUDIO IN CH1, CH2 XLR 3-pin, female (1 each)
When AUDIO switch is set to MIC:
When AUDIO switch is set to LINE:
INTERCOM 1, XLR 5-pin, female (1 each)
INTERCOM 2
EARPHONE Stereo minijack (1)
DC IN XLR 4-pin (1), DC 10.5 V to 17 V
DC OUT 4-pin (1), DC 10.5 V to 17 V, max. 0.5 A
(This may be limited by the imposed load
or inputs.)
2-pin (1), DC 10.5 V to 17 V, max. 2.5 A
(This may be limited by the imposed load
or inputs.)
SDI 1, SDI 2 BNC-type (1 each)
SDI-MONI BNC-type (1)
TEST OUT BNC-type (1)
PROMPTER/GENLOCK BNC-type (1), 1 Vp-p, 75 ohm
PROMPTER2 BNC-type (1), 1 Vp-p, 75 ohm
RET CTRL 6-pin (1)
REMOTE 8-pin (1)
TRACKER 10-pin (1)
CRANE 12-pin (1)
USB USB 2.0 Type A 4-pin (1) (for connecting
USB drive)
NETWORK TRUNK RJ-45 type 8-pin (1)
Supplied accessories
Operation guide (1 set)
Operation manual (CD-ROM) (1)
Cable clamp belt (1 set)
Camera number label (1)
Screws (+B3×8) (2)
Design and specifications are subject to change without
notice.
62
–60 dBu (can be selected up to
–20 dBu by menu or HDCU2000/2500
operations), balanced
0 dBu, balanced