Sony super motion hdc4300 Operation Manual page 48

OPERATION
Page name Item
Page No.
<TRACKER> TRACKER RECEIVE
22 SELECT
INTERCOM
ENG
PROD
PGM1
PGM2
INPUT LEVEL
OUTPUT LEVEL L-CH
OUTPUT LEVEL R-CH
<EARPHONE> EARPHONE RECEIVE
23 SELECT
INTERCOM
ENG
PROD
PGM1
PGM2
TRACKER
<OPERATOR FILE> READ (USB t CAM)
24
WRITE (CAM t USB)
PRESET
FILE ID
CAM CODE
DATE
Settings
SEPARATE, MIX
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
–20 dBu, 0 dBu
–6 dBu, 0 dBu, 6 dBu
0 dBu, –6 dBu, –12 dBu,
–18 dBu, –20 dBu, –24 dBu
SEPARATE, MIX
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Max. 16 characters
Camera code
Date
48
Description
JN/SY models only.
When ENG/PROD is set to MIX, this item is split into
ENG and PROD items (with same setting).
On JN/SY models, these items are displayed only
when ENG/PROD is set to MIX.
JN/SY models only.
When ENG/PROD is set to MIX, this item is split into
ENG and PROD items (with same setting).
On JN/SY models, these items are displayed only
when ENG/PROD is set to MIX.
Reads the operator file from a USB drive.
Writes the current settings of the operator file items to
a USB drive.
Sets the operator file items to the preset values in
internal memory.
Enters a comment for the operator file to be written to
a USB drive.
See "To specify a character string" on page 29.
Display only
Display only