Sony super motion hdc4300 Operation Manual page 11

CE and CN models (for PAL areas)
2
RET1 2 3
1
ENG PROD
MIC
LINE1 PROD
OFF
ENG
INTERCOM 1
a
PROD control
ENG control
ENG PROD
MIC
LINE1 PROD
OFF
ENG
INTERCOM 1
MIC LINE1 switch
MIC LINE2 switch
TRACKER control
a INTERCOM1 and INTERCOM2 controls and switches
The reception level controls are common to intercom 1 and
intercom 2. The talk lines can be set independently for
intercom 1 and intercom 2.
ENG (engineer line) control:
Adjust the intercom audio listening level of the engineer line.
PROD (producer line) control
Adjust the intercom audio listening level of the producer line.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
TRACKER control
Adjust the intercom audio listening level at the TRACKER
connector (page 12) on the connector panel when using the
connector for intercom.
MIC LINE1 (intercom microphone line 1) switch
Select the talk line for intercom 1.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom line 1
ENG: To talk over the engineer line
3 4
RET2 2 3
LIGHT
1
4 4
ON
OFF
PGM1 PGM2
LEVEL
MIC
TRACKER
REAR
LINE2 PROD
OFF
ENG
FRT
INTERCOM 2
PGM2 control
PGM1 control
PGM1 PGM2
MIC LEVEL
TRACKER
REAR
LINE2 PROD
OFF
ENG
FRT
INTERCOM 2
LEVEL switch
MIC LINE2 (intercom microphone line 2) switch
Select the talk line for intercom 2.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom line 2
ENG: To talk over the engineer line
LEVEL switch
REAR: The intercom audio listening level is adjusted with the
controls on this panel.
FRT: The intercom audio listening level is adjusted with the
INTERCOM LEVEL control (page 9) on the front of the
camera.
b RET 1 (return video 1) button and select switch
The return video signal selected with the switch is displayed
on the viewfinder screen while the button is pressed.
c RET 2 (return video 2) button and select switch
When other return video systems are used in addition to return
video 1, you can monitor the signal selected with the switch on
the viewfinder screen while pressing the button.
Note
The RET 1 button has priority over the RET 2 button if both
buttons are pressed.
If RET 1 and RET 2 buttons are pressed at the same time, the
two buttons function as the RET 3 button according to the
setting of the <RETURN> page in the OPERATION menu.
d LIGHT switch
Set to ON to illuminate the operation panel.
Connector panel
a
DC OUT
b
c
TRACKER
d
e
RET CTRL
f
LINE
DC IN 10.5-17V
g
a EARPHONE jack (stereo minijack)
For connecting an earphone or headset to hear the intercom
audio.
b DC OUT (DC power supply output) connector (4-pin)
To supply power to devices such as a wireless receiver
(optional) (max. 0.5 A).
11
EARPHONE
REMOTE
CRANE
PROMPTER
/GEN
LOCK
FRONT MIC AES/EBU
MIC LINE MIC
+48V +48V
TEST
OFF OFF
OUT
AUDIO IN
CH1 CH2
SDI
MONI
m
h
i
j
k
l