Sony super motion hdc4300 Operation Manual page 47

OPERATION
Page name Item
Page No.
<HEADSET MIC> INTERCOM1
19 (U11)
LEVEL
POWER
UNBAL
INTERCOM2
LEVEL
POWER
UNBAL
<INTERCOM1> INTERCOM1 RECEIVE
20 SELECT
INTERCOM
ENG
PROD
PGM1
PGM2
TRACKER
SIDE TONE
INTERCOM1/2
ENG/PROD
<INTERCOM2> INTERCOM2 RECEIVE
21 SELECT
INTERCOM
ENG
PROD
PGM1
PGM2
TRACKER
SIDE TONE
INTERCOM1/2
ENG/PROD
Settings
DYNAMIC, CARBON, MANUAL
–60 dB, –50 dB, –40 dB, –30 dB,
–20 dB, (–60 dB), (–50 dB),
(–40 dB), (–30 dB), (–20 dB)
–6, 0, 6 dB
ON, OFF, (ON), (OFF)
ON, OFF, (ON), (OFF)
DYNAMIC, CARBON, MANUAL
–60 dB, –50 dB, –40 dB, –30 dB,
–20 dB, (–60 dB), (–50 dB),
(–40 dB), (–30 dB), (–20 dB)
–6, 0, 6 dB
ON, OFF, (ON), (OFF)
ON, OFF, (ON), (OFF)
SEPARATE, MIX
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
MU, 1 to 99, 50
SEPARATE, MIX
SEPARATE, MIX
SEPARATE, MIX
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
---, LEFT, RIGHT, BOTH
MU, 1 to 99, 50
SEPARATE, MIX
SEPARATE, MIX
47
Description
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Input gain
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Settings in ( ): With CARBON (cannot be changed)
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Input gain
Settings in ( ): With DYNAMIC or CARBON (cannot be
changed)
Settings in ( ): With CARBON (cannot be changed)
JN/SY models only.
When ENG/PROD is set to MIX, this item is split into
ENG and PROD items (with same setting).
On JN/SY models, these items are displayed only
when ENG/PROD is set to MIX.
JN/SY models only.
JN/SY models only.
When ENG/PROD is set to MIX, this item is split into
ENG and PROD items (with same setting).
On JN/SY models, these items are displayed only
when ENG/PROD is set to MIX.
JN/SY models only.