Precautions
Things to consider before use
Beholder EC1 is shipped from the factory with perfect calibration. However, after a long period of
unuse or if the temperature difference is too large, it may cause the gyro to drift automatically or to tilt
during use.
Gyro Correction: Place the Beholder EC1 horizontally on the table, power on the gimbal and
press and hold the menu button for 6 seconds. The system automatically enters the gyroscope
calibration mode. The motors lose power for 5 seconds. After that, the automatic system calibration is
complete and the stabilizer can resume normal use.
Note:
1. During the calibration process, hold the gimbal handle on the table as stable as possible.
2. The mini USB port is designed only for a wired joystick and can't be used for charging.
3. In order to obtain a better shooting experience in the use of EC1 when shooting, avoid any
collision and do not use excessive force.
▲
19