Table of Contents
Advertisement
Sending Documents
Direct Transmission
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
2
3
4
5
NOTE
52
Set document(s) face down.
8
1
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
Your machine starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If using Pulse dialing, and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
TONE
The dialing mode will change from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press
to stop the transmission. The Communication Journal will not print, regardless of the
1
printout mode setting of the Communication Journal.
9
.
STOP
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
00%
PRESS START TO DIAL
5551234
* DIALING *
5551234
PAUSE
to
Advertisement
Table of Contents
