Table of Contents
Advertisement
Customizing Your Machine
Fax Parameter Table
No.
Parameter
34
ENERGY SAVER
35
DAYLIGHT TIME
36
RING PATTERN
DETECT (DRD)
(See Note 2)
37
RCV TO MEMORY
38
ACCESS CODE
39
PIN CODE ACCESS
42
CONF. FILE SAVE
43
PASSWORD-XMT
44
PASSWORD-RCV
46
SELECT RCV
38
Setting
Number
1
MODE
2
*3
1
*2
3
*1
2
*1
2
3
*1
2
*1
2
*1
2
*1
2
Setting
Off
To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
Energy-
(1 to 120 minutes) for the machine to enter into the
Saver
selected mode.
Sleep
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off
Energy-Saver : Saves energy by consuming less power
Sleep
OFF
Set Daylight Time according to your local regulation.
OFF
: Daylight Time is not applied.
Mar 2nd
Mar 2nd : From 2 a.m. on the 2nd Sunday of March to 2
Apr 1st
a.m. on the 1st Sunday of November.
Note : The date setting shown above reflects
Apr 1st
: From 2 a.m. on the 1st Sunday of April to 2
a.m. on the Last Sunday of October.
Invalid
All ring patterns.
Valid
Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the type C
described above.
(----)
Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (See page 92)
(----)
Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 90)
None
Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 97)
Suffix
Prefix
Invalid
Selecting whether the machine saves the confidential
polled file even after the file is polled once.
Valid
Off
Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
On
receiving station when transmitting. (See page 102)
Off
Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
On
transmitting station when receiving. (See page 103)
Invalid
Selecting whether the machine performs selective
reception. (See page 100)
Valid
Comments
: The unit will remain in standby mode
and consume more energy than when in
Energy-Saver or Sleep modes.
than when in standby mode by turning
off the fuser unit after the specified time.
: This is the lowest power state that the
machine enters after the specified time
without actually turning off.
the New Regulation starting in 2007. In
2006, the Daylight Time will end on the
Last Sunday of October.
Advertisement
Table of Contents
