To Send A Document With Sub-Address - Panasonic Panafax UF-5950 Operating Instructions Manual

To Send a Document with Sub-address

Using One-Touch/ABBR. Number Dialing
The operation is the same as for normal dialing
1
Set document(s) face down.
2
Ex:
3
The document is stored into memory, and your machine
starts to dial the number of the station, and sends the
document(s) with Sub-addressing information.
Using Manual Number Dialing
Use to separate the Telephone number, and the Sub-address.
FLASH
1
Set document(s) face down.
2
Enter the telephone number, press
the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex: Telephone number = 5551234, Sub-address =2762
Enter as:
FLASH
3
The document is stored into memory, and your machine
starts to dial the number of the station, and sends the
document(s) with Sub-addressing information.
NOTE
1.
FLASH
in the display.
2. Manual Off-Hook, or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
FLASH
5 5 5 1 2 3 4
2 7 6 2
separates the Sub-address from the Telephone number, and is indicated by an "s"
Sub-addressing
ENTER STATION(S)
THEN PRESS START 00%
<01>(Station name)
5551234s2762
* STORE *
PAGES=001
ENTER STATION(S)
THEN PRESS START 00%
then enter
TEL. NO.
5551234s2762
* STORE *
PAGES=001
NO.001
01%
NO.001
01%
115