Desktop Holder - Docomo SH-10C Instruction Manual

Charging
It is recommended that the accompanying
desktop holder be used for charging to prevent
water from seeping or dust from getting in
caused by forgetting to close the external
connector terminal cover.
The AC adapter and desktop holder are not
waterproof/dust-proof. Never try to charge the
battery pack when the FOMA terminal is wet.
For precautions on the waterproof/dust-proof
performance when charging nP. 28
Charging by using desktop holder
1
Turn the arrow side of the AC
adapter connector up and insert it
into the connector terminal of the

desktop holder

Keep the connector parallel with the
desktop holder and securely push all the
way in until it clicks.
2
Insert the AC adapter power plug
into an outlet
3
When placing the FOMA terminal
in the desktop holder, charge alert
is heard, charging LED illuminates,
and charging starts
Put the bottom of the FOMA terminal on the
desktop holder (1) and push down until it
clicks (2).
30
Basic Operation
Charging LED
Connector
(with the
arrow side up)
100V AC
outlet
4
Charging is complete when charge
alert is heard and charging LED
turns off
Hold the desktop holder and lift the FOMA
terminal out.
Pull the AC adapter out of the outlet when left
unused for a long period of time.
When charge alert is not heard or when
charging LED does not illuminate, check that
the FOMA terminal is placed securely in the
desktop holder (except when terminal is turned
off, manner mode is set or charge alert is
[OFF]).
When placing the FOMA terminal in the
desktop holder, be careful not to catch a strap,
etc.
When switching to the viewer position with the
FOMA terminal set in the desktop holder,
operate with holding the FOMA terminal so that
it does not come off the desktop holder.
FOMA AC
Adapter 01/02