Docomo SH-10C Instruction Manual page 147

15
Click the [ネットワーク] (Networking)
tab, confirm all settings and click [設定]
(Settings).
: Set [呼び出すダイヤルアップサーバーの種類]
(Type of dial-up server to call) to
[PPP: Windows95/98/NT4/2000, Internet].
: In the [この接続は次の項目を使用します]
(Components checked are used by this connection)
field, E should appear only for [インターネットプロ
トコル (TCP/IP)] (Internet protocol (TCP/IP)). Leave
[QoS パケットスケジューラ] (QoS packet
scheduler) settings as is. No changes are
necessary.
: The PPP setting screen appears.
: For TCP/IP settings used for connecting to an
Internet service provider, confirm with the Internet
service provider or network administrator.
16
Check all options to show H and click
[OK].
: Properties screen of the host reappears.
17
Click [OK] on the [プロパティ] (Properties) screen.
: The host and TCP/IP protocol are set.
: Refer to P. 28 for details on connecting to dial-up network.
Connecting to dial-up network
Example: Connecting to the dial-up network via FOMA USB Cable with Charge Function 02 on Windows 7
The screens are different for Windows Vista and Windows XP.
1
Connect the FOMA terminal to your PC via FOMA USB Cable with Charge
Function 02.
2
Click [スタート] (Start) menu/[コントロールパネル] (Control panel).
For Windows Vista
1
Click [スタート] (Start) menu/[接続先] (Connect to) and proceed to step 6.
For Windows XP
1
Click [スタート] (Start) menu/[すべてのプログラム] (All programs)/[アクセサリ]
(Accessories)/[通信] (Communications)/[ネットワーク接続] (Network connections) and
proceed to step 6.
3
Click [ネットワークとインターネット] (Network and Internet).
4
Click [ネットワークと共有センター] (Network and sharing center).
5
Click [アダプターの設定の変更] (Change adapter setting) in [タスク] (Task).
: The dial-up network screen appears.
28