Docomo SH-10C Instruction Manual page 127

7
Click [OK] when [FOMA SH10Cドライバのインストールが完了しました。 ]
(Installation of FOMA SH10C driver is completed.) appears.
: Installation of the FOMA communication configuration file finishes.
Installation may take a few minutes.
When [プログラム互換性アシスタント] (Program Compatibility Assistant) appears, click [このプログラムは正しくイ
ンストールされました] (This program installed correctly).
When a message prompting to restart the PC appears, follow the instruction and restart.
When [他のデバイスドライバのインストールが終了後に再度インストーラを実行してください。 ] (Run the installer
again after other device drivers are installed) appears, uninstall other drivers automatically installed and install the
driver. Refer to "Uninstalling FOMA communication configuration file (Driver)" for steps on uninstalling.
Confirming installed FOMA communication configuration file (Driver)
If the FOMA terminal is not properly recognized by the PC, setup and communications are not possible.
Example: Confirming Windows 7 drivers
The screens are different for Windows Vista and Windows XP.
1
Click [スタート] (Start) menu/[コントロールパネル] (Control panel) and click
[システムとセキュリティ] (System and security).
: System properties screen appears.
For Windows Vista
1
Click [スタート] (Start) menu/[コントロールパネル] (Control panel).
2
Click [システムとメンテナンス] (System and maintenance)/the [システム] (System) icon.
For Windows XP
1
Click [スタート] (Start) menu/[コントロールパネル] (Control panel).
2
Click the [パフォーマンスとメンテナンス] (Performance and maintenance) icon/the [シス
テム] (System) icon.
2
Click [デバイスマネージャー] (Device manager).
: The device manager screen appears.
For Windows Vista
1
Click [デバイスマネージャ] (Device manager) in [タスク] (Task).
For Windows XP
1
Click the [ハードウェア] (Hardware) tab.
2
Click [デバイスマネージャ] (Device manager).
8