Docomo SH-10C Instruction Manual
  1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. SH-10C
  6. Instruction manual

Docomo SH-10C Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
'11.5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SH-10C and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo SH-10C

Summary of Contents for Docomo SH-10C

  • Page 1 ’11.5...
  • Page 2 The actual screens and operation of all functions and illustrations may differ. From a PC Download from the DOCOMO Note that “SH-10C” is referred to as the website “FOMA terminal” in this manual. http://www.nttdocomo.co.jp/support/trouble/ Reproduction of this manual in part or in manual/download/index.html...

  • Page 3: Table Of Contents

    Introduction FOMA Terminal ......2 Precautions (Always follow these What You Can Do with SH-10C..3 directions)........7 Part Names and Functions ..4 Handling Precautions ....17 Viewer Position ......6 Waterproof/Dust-proof function... 23 Before Using ....... 29 Sound/Screen Setting ....41 Screen Explanation ....

  • Page 4: Introduction

    SIM card to use non-DOCOMO SIM cards. Keep a separate memo and note information SIM card can be unlocked at a docomo Shop. (e.g. phonebook, schedule, memo, record Commission is incurred separately for unlocking message, voice memo) stored in the FOMA SIM card.

  • Page 5: What You Can Do With Sh-10C

    What You Can Do with SH-10C Koe-no-Takuhaibin nP. 49 Wi-Fi nP. 79 Koe-no-Takuhaibin is a service to record You can connect to the access point at your message by voice call and notify the home or public wireless LAN service or...

  • Page 6: Part Names And Functions

    Part Names and Functions Key illustrations may look different from actual keys. Introduction...
  • Page 7 m: Mail/Operation guidance key (nP. 36, Using earphone P. 55) s: Start/Hands-free key (nP. 49) Connect an earphone compatible with external 1 to 9, *, 0 and #: Dial/Character connector terminal (sold separately). entry keys In addition, when using an earphone which $: Multi/VeilView key (nP.

  • Page 8: Viewer Position

    Sub display (nP. 34) Viewer Position GPS antenna* microSD Card slot (nP. 82) 1Seg antenna To use the FOMA terminal, open it (normal Use to receive 1Seg. position) or use it in the viewer position. FOMA antenna* You can continue to operate with the touch Main camera panel when you switch the FOMA terminal to the Use to shoot still pictures or moving pictures.
  • Page 9 Precautions (Always follow these directions) Before use, read these “Precautions” carefully and use your FOMA terminal properly. Keep this manual in a safe place for future Cautions when rotating reference. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.
  • Page 10 Handling near electronic medical equipment adapters specified by NTT DOCOMO ........P. 15 for use with the FOMA terminal.
  • Page 11 Warning Caution Do not subject the equipment to Do not leave the equipment on strong impacts or throw it. unstable surfaces, such as on a wobbling table or sloped surface. May fall and cause injury. May cause fires, burns, bodily injury or electric shock. Do not store the equipment in Do not allow conductive materials locations that are subject to...
  • Page 12 Do not aim the infrared port towards Do not allow water or other liquids, metal, flammable material or other foreign home electric appliances with an objects to enter the UIM or microSD Card infrared device during Ir communication. slot on the FOMA terminal. May interfere with the operation of infrared devices and May cause fires, burns, bodily injury or electric shock.
  • Page 13 Earphone Signal Level Caution The maximum output voltage for the music player function, measured in accordance with EN 50332-2, is 28.0 mV. Do not swing the FOMA terminal by If you have a weak heart, take extra its antenna, strap, etc. precautions when setting functions such as the vibrator and ring tone May hit you or others around you, resulting in bodily injury.
  • Page 14 If you use the FOMA terminal in an Danger automobile, contact the automobile manufacturer or vendor to check Do not touch terminals with metallic whether the operation of the objects such as wires. In addition, electronic equipment is affected by do not carry or store the battery signals.
  • Page 15 Never use this adapter in positive packs, and take them to a docomo Shop, retailer or grounded vehicles. institution that handles used batteries in your area. May cause fires, burns or electric shock.
  • Page 16 Take care not to short-circuit the Wipe off any dust on the power plug. charging terminal when it is connected to an outlet or cigarette lighter socket. Also, take care not to allow any part of May cause fires, burns or electric shock. your body (hands, fingers, etc.) to come Fully plug the AC adapter into the into contact with the charging terminal.
  • Page 17 Handling near electronic medical If you have an implanted cardiac pacemaker or an implanted equipment cardioverter-defibrillator, always The precautions detailed here conform to the carry or use your FOMA terminal at guidelines drawn up by the Electromagnetic least 22 cm away from your implant. Compatibility Conference Japan, regarding the Electromagnetic signals may have harmful effects on protection of electronic medical equipment...
  • Page 18 Material/Surface When you feel trouble such as Part treatment fatigue or discomfort (sickness that is similar to carsickness) while PET/Hard Display side coating viewing 3D images, stop using the PC resin/Hard FOMA terminal. Back of display side coating May cause sick feelings. Take a rest properly. Side surface of back ABS resin/UV Be extra careful to use in the environment that tends to...

  • Page 19: Handling Precautions

    1Seg General notes SUS/Nickel antenna Metal section plating, Trivalent SH-10C is waterproof/dust-proof, however, chromium plating do not allow water to seep or dust to get in External connector terminal SUS/Nickel plating the FOMA terminal and do not allow External Cover...
  • Page 20 FOMA terminal. Carrying the handset in a tightly packed bag or DOCOMO shall not be liable for any loss of content. sitting on the handset in your pocket may cause a Do not drop or otherwise subject the FOMA damage to display, other internal components or terminal to severe impact.
  • Page 21 May lower the performance or shorten the life of the stored in the UIM. battery pack. DOCOMO shall not be liable for any loss of content. The second level of the battery pack icon or To protect the environment, please take any...
  • Page 22 Bluetooth function, DOCOMO shall not be appliances such as microwave ovens. liable for any loss of content. 1. Before using this product, make sure With the FOMA terminal, use headset, that “another radio station”...
  • Page 23 ③ OF: The modulation system is the OFDM system. Notes about wireless LAN (WLAN) ④ 4: The estimated coverage distance is 40 m or less. Wireless LAN (WLAN) uses radio waves to : All radio frequencies ⑤ communicate information. Therefore, it has between 2400 MHz and 2483.5 MHz are used an advantage of freely connecting to the LAN and the frequencies for mobile object identifiers...
  • Page 24 Caution 2. If the device causes harmful radio interference to the in-house radio Never use the FOMA terminal that is stations for a mobile object identifier, modified. Using a modified device violates immediately change the radio frequency the Radio Law. or stop use, and contact the number The FOMA terminal has acquired the certification of listed in “General Inquiries”...

  • Page 25: Waterproof/Dust-Proof Function

    (approximately 3 m from the handset) for 3 Do not soak the FOMA terminal in the bathtub. minutes or more. *2 IPX7 means that SH-10C phone keeps Things to keep in mind functioning after it is slowly submerged to depth...
  • Page 26 Opening external connector Attaching back cover terminal cover and HDMI terminal Insert the tab of the top of the back cover cover into the FOMA terminal slot (1), attach it in the direction of the Hook a finger on the slot to open. arrow (2) and securely push down Slot with both hands (3)

  • Page 27: Removing Back Cover

    Stop using the FOMA terminal, turn off the power, remove the battery pack and contact a repair center that DOCOMO specifies. The rubber gasket of the external connector terminal cover, the HDMI terminal cover and the back cover play an important role in maintaining waterproof/dust-proof performance.
  • Page 28 May cause malfunction. Do not apply water flow stronger than allowed (nP. 23) (over 6 liters/min). May cause malfunction though SH-10C provides waterproof performance of IPX5. Do not let the FOMA terminal get wet with liquids other than water at room temperature (between...
  • Page 29 Shake the FOMA terminal DOCOMO does not guarantee actual approximately 20 times, securely operations under all states. Malfunctions holding its hinge section, until deemed to be caused by inappropriate there is no more water splattering operation by the customer are not covered by the warranty.
  • Page 30 Softly press dry and clean cloth, Charging etc. against the FOMA terminal to Accessories and optional parts are not wipe off water remaining in the waterproof/dust-proof. Check the followings mouthpiece, earpiece, speaker, before and after charging. keys or hinges Make sure that the FOMA terminal is not wet. If Pat the opening with cloth to remove water the FOMA terminal is wet or after the FOMA because there may be any water remaining...

  • Page 31: Before Using

    Attach the battery pack The FOMA terminal does not support the UIM Turn the recycle mark side of the battery (blue). Change the UIM (blue) at a docomo pack up, match tabs and attach the battery Shop. pack.

  • Page 32: Desktop Holder

    Charging Charging LED Connector It is recommended that the accompanying (with the desktop holder be used for charging to prevent arrow side up) water from seeping or dust from getting in caused by forgetting to close the external connector terminal cover. The AC adapter and desktop holder are not waterproof/dust-proof.
  • Page 33 When charge alert is heard and Charging by using AC adapter charging LED turns off, charging is Read the user’s guide of FOMA AC Adapter 01/ complete 02 (sold separately). When removing the connector, always hold Open the external connector the release buttons on both sides (1) and terminal cover and insert the AC unplug it horizontally (2).
  • Page 34 [Setting]/select the setting/[OK] Making initial setting If the setting of Password or Request permit/ Checking your own phone deny is not complete, the setting screen appears number every time the power is turned on. Alternatively, in the Normal menu, [Setting]/ In the Normal menu, [Profile] [Other setting]/[Initial setting] to display the setting screen.

  • Page 35: Screen Explanation

    Bluetooth Screen Explanation Ir communication i-mode Viewing display UIM error Self mode Music&Video Channel program Icon display area reservation 3D/2D display 3G/GSM Main icons VeilView Battery level USB connection (High Low) Record message Signal status Keypad dial lock (Strong Weak) Manner mode When [ ] appears, the...
  • Page 36 Vertical/Horizontal display may not appear properly Checking notices with stock icon right after the screen or power is turned on. Stock icons appear in the stand-by display and You can set the display not to automatically switch. notify you when a call is missed or a new mail is In addition, you can temporarily keep the display received.
  • Page 37 Title of each episode 3D display function Clear icon Since this FOMA terminal is compatible with 3D MENU icon display, you can display 3D stand-by display, play Touch the icon to display menus set in Select 3D still/moving pictures and use 3D compatible startup menu of Menu preference.
  • Page 38 Operation guidance key Displaying each menu Press z in the stand-by display to display Normal Use to select or execute the menus menu, Basic menu and Shortcut menu. displayed in the operation guidance. The following shows the keys assigned to select or execute the menu items displayed in the guidance.
  • Page 39 Menu operation Selecting a function from submenu When [Submenu] appears in the operation For details on the available functions nP. 92 guidance, functions (submenu) that can be used in The method for selecting functions may differ the screen appear by pressing z. Select the depending on the Kisekae Tool set for the displayed submenu with w.
  • Page 40 Basic operation of touch panel Operation Main purpose Quickly slide Switch pages Operation Main purpose Quickly slide to the Touch Select/OK left/right in the Touch a button menu screen, etc. displayed on the Display previous/ screen. next data Quickly slide your Quickly slide to the finger and put it off.
  • Page 41 Using Quick voice activation Using Guide ※ Quick voice activation function is provided in ※ Guide function is provided in Japanese. Use this function when Japanese. You can retrieve and execute a function with you do not know the voice in the stand-by display. operation method of It is convenient when you cannot find the FOMA terminal.

  • Page 42: Entering Characters

    Single-byte alphabet characters Character Entry (upper case b lower case) Entering characters Entering characters Example: When entering “電話” Enter characters for functions such as In the character entry screen, enter phonebook and mail on the FOMA terminal. “でんわ” The explanations in this manual are based on method for entering characters in 5-touch entry でんわ: 4 (four times)/* (once)/0 method using dial buttons.

  • Page 43: Sound/Screen Setting

    Setting vibrator Sound/Screen Setting You can set the vibration for incoming calls, GPS positioning, alarms, using i-appli and Changing ring tone operating the touch panel. In the Normal menu, [Setting]/ In the Normal menu, [Setting]/ [Sound/Vibration/Manner]/[Ring [Sound/Vibration/Manner]/ tone] [Vibration mode] Select an item Select an item [Call ring tone]...
  • Page 44 In the Normal menu, [Setting]/ Disabling VeilView $ (for at least 1 second) [Sound/Vibration/Manner]/[Silent mode] Images set in advance will be displayed during Select a type 3D display. [General] Changing menu display [Personalized]/set each item/C [Silent manner mode] You can set the start menu which is displayed when you press z in the stand-by display.
  • Page 45 To check data: Select Kisekae tool (to Changing Machi-chara setting display the data list screen in Kisekae A character appears in the stand-by display when tool)/select data you set Machi-chara. • For the voice called LED, videophone called LED, mail/message LED or open/ In the Normal menu, [Setting]/ close LED, you can check the LED color...
  • Page 46 Set each item/C Setting eco mode If eco mode auto-start set. is set, [ If the FOMA terminal is set to eco mode, settings appears. such as display light time are set as follows. Setting light of display and Indicator light keypad Keypad sound Touch sound...

  • Page 47: Security Code

    Shop, bring your identification (a driver’s license etc.) and In stand-by, i/[お客様サポート] your UIM to a docomo Shop or contact the (user support)/[各種設定 (確認 ・ 変 number listed in “General Inquiries” on the 更 ・ 利用)] (settings (check/change/ back of this manual.

  • Page 48: Setting Pin Code

    If you enter the wrong code ten times If you enter the wrong PIN1 code or PIN2 code continuously, the UIM is completely locked. In three times continuously, it is locked. this case, contact a docomo Shop. Basic Operation...
  • Page 49 ※ Unavailable from part of IP phones. Enable/Disable: In the Normal Omakase Lock can also be set/ menu, [Setting]/[Lock/Security]/ released from the My docomo [Lock settings]/[Auto-key lock]/ website using PCs. select the lock type/enter the Refer to “Mobile Phone User’s terminal security code/set each Guide [Basic Usage]”...
  • Page 50 Rejecting a call from a caller unset Lock Operation/Restriction function in phonebook IC card Locks to prevent the use of IC card In the Normal menu, [Setting]/ lock functions. [Lock/Security]/[Call rejection Enable: In stand-by, r (for at least 1 second)/[Yes] setting] Disable: In stand-by, r (for at least [Unregistered caller]/enter the...

  • Page 51: Call

    Phone To function from the transmitted SMS. DOCOMO videophones comply with “3G-324M Refer to the DOCOMO website for details. as defined by the international 3GPP standard”. C When you record a Connection is not available with videophones Koe-no-Takuhaibin using other standards.
  • Page 52 When a call is received, the ring malfunctions, repairs or other handling of the tone sounds and the called LED FOMA terminal. DOCOMO shall not be liable flashes for any loss of content. It is recommended that When the caller does not send a caller ID, a a memo be kept of contents for record non-disclosure reason message appears.
  • Page 53 Using various network services Network services are not available outside the service area or in a place with no signal. You can use the following DOCOMO network For details on “OFFICEED”, refer to the services on the FOMA terminal. DOCOMO website for corporations (in Japanese...
  • Page 54 For subscription and inquiries, contact the The FOMA terminal supports “Location number listed in “General Inquiries” on the back notification of emergency call”. of this manual. When dialing an emergency number such as 110, 119, and 118, the information of your Setting Voice Mail Service location (location information) is automatically notified to the agency that received the...

  • Page 55: Available Services Overseas

    FOMA terminal as you use in Japan in the of service from your country of stay. Refer to the back of this manual for inquiries. Note that service area of DOCOMO affiliated overseas communication/calling charges after the FOMA telecommunications carriers without...

  • Page 56: Phone Number

    Make a call to outside the country Main communication GSM/ service GPRS you stay in (including Japan) i-concier Make a call from your country of stay to Japan or i-Widget other countries. Packet communication by In stand-by, enter “+” (0 for at connecting a PC least 1 second), country code, area GPS position location...

  • Page 57: Mail

    • To move on to the next conversion Mail candidate: C To attach files: Select the attachment field in the mail composition screen/select a You can exchange mails with other i-mode file compatible terminals and e-mail via the Internet by subscribing to i-mode service. You can attach up to ten files (pictures, Creating Deco-mail/ moving picture files, etc.) in total of 2 MB to...
  • Page 58 Creating Decome-Anime [-END-] appears at the end of the message. When receiving limit is exceeded, [/] or [//] Decome-Anime is an appears and the exceeding portion is expressive mail service that automatically deleted. uses Decome-Anime Templates and Flash movies Displaying a mail in Inbox/Outbox/ with a message or image Unsent box inserted.
  • Page 59 In stand-by, m/[Check new mail/ When [Area mail received] appears, the screen before reception automatically message] reappears in approximately 30 seconds. Sorting i-mode mail Setting Area Mail Set Sort rules for user folders and sort i-mode mail In stand-by, m/[Mail setting]/ and SMS automatically.

  • Page 60: Phonebook

    Point the cursor to the history/ Phonebook z/[Add]/[Add to phonebook] Set each item/C You can use the FOMA terminal phonebook and UIM phonebook. Registering all numbers/addresses displayed in a mail Adding phonebook entries In the mail details screen, select The following items can be added to one mail addresses or phone numbers phonebook.

  • Page 61: I-Mode/Full Browser

    Search In stand-by, i i-mode/Full Browser Select an item Viewing i-mode site i-mode enables you to use online services, such as connection to sites and the Internet, and i-mode mail, using display of i-mode compatible terminals. i-mode is a paid service that requires a subscription.
  • Page 62 Switching browsers Moving to previous/next page The FOMA terminal saves sites you viewed. Press For i-mode m/i to show the memory without While viewing sites with i-mode, communication. This memory is called the “cache”. z/[Full Browser]/[Switch to For Full Browser While viewing sites with Full Browser, z/[i-mode Browser]/...
  • Page 63 Saving frequently accessed sites Saving site contents You can save frequently viewed sites and You can save screens from your favorite web pages on the Internet as bookmarks for sites etc. as screen memos to the FOMA convenient access. terminal or microSD Card. While viewing sites, z/[Screen While viewing sites, [Bookmark]/[Add bookmark]...

  • Page 64: I-Channel

    (i-mode subscription is required). i-Channel has “ベーシックチャネル (Basic Channel)” provided by DOCOMO and “おこ Setting i-Channel display のみチャネル (Okonomi (Optional) Channel)” Set whether to display i-Channel ticker in the provided by IP (Information Providers).

  • Page 65: Map/Gps

    GPS of high accuracy. Note that DOCOMO shall Using navigation not be liable for the pure economic loss caused Activate GPS compatible i-appli and use the by using for these purposes or other purposes navigation function.
  • Page 66 FOMA terminal is automatically pedometer information are sent to a service sent to DOCOMO, and you can receive services provider (Present location is measured related to i-concier or various services provided by approximately once every 5 minutes according DOCOMO.
  • Page 67 Enjoy Display the folder Camera Switch list screen of My camera-mode picture Switch High speed Screen layout and operations for 3 Fix camera shake mode/Normal shooting screen mode Select image ISO sensitivity Shooting screen layout quality 7 Auto timer White balance Still picture Moving picture Select save...
  • Page 68 Shooting still/moving pictures Shooting 3D still pictures In the Normal menu, [CAMERA/TV/ Although the cameras are made with high-precision technology, some pixels or lines MUSIC]/[Camera]/[3D shooting] look constantly dark or bright. Further, white When 3D shooting is activated, Picture lines and other noise may appear in images Light illuminates in red.
  • Page 69 Viewing still/moving pictures Shooting moving pictures after shooting In the Normal menu, [CAMERA/TV/ MUSIC]/[Camera]/[Movie Displaying shot still pictures shooting] When moving pictures shooting is In the Normal menu, [Data box]/ activated, Picture Light illuminates in red. [My picture] t/& [Camera] folder/select a still The subject at the center is automatically picture focused and shot.
  • Page 70 Shooting in various ways Function Details Setting/Starting method ISO sensitivity You can shoot clear pictures with less In the still picture shooting screen, C/[Shooting menu]/[ISO sensitivity] camera shake in the low-light situation. z/C/ Shoot by scene You can set the camera to shoot with In the shooting screen, natural colors and focus based on the [Shooting menu]/[Shoot by scene]...

  • Page 71: Before Using 1Seg

    From a PC http://www.dpa.or.jp/english/ shorter than estimated. From i-mode http://www.dpa.or.jp/1seg/k/ (in DOCOMO shall not be liable for any loss or Japanese only) change of the saved data due to malfunctions, repairs or other handling of the FOMA terminal. C Broadcasting wave...
  • Page 72 Setting channels Screen layout and operations for watching screen To watch 1Seg, set the channels and select a channel list first. 1Seg watching screen layout Perform Auto setting inside the area of a terrestrial digital TV broadcasting service with the 1Seg antenna fully pulled out. In the Normal menu, [CAMERA/TV/ MUSIC]/[1Seg]/[Channel setting]...
  • Page 73 MUSIC]/[1Seg]/[TV timer list] change, may not be able to be played. z/[Set new timer]/[Manual DOCOMO shall not be liable for handling of reception]/[Manual recording] CCCD (Copy Controlled CD) or even if you cannot save music data as a WMA file.
  • Page 74 Refer to “Mobile Phone User’s Guide [i-mode] Music&Video Channel FOMA version” for details on Music&Video Channel. ※ The Music&Video Channel service is provided in Japanese. Setting programs Music&Video Channel is a service that up to approximately 2 hour music programs are In the Normal menu, [CAMERA/TV/ automatically distributed at night if your MUSIC]/[Music&Video...
  • Page 75 Playing music data Key operations for MUSIC Player screen In the Normal menu, [Data box]/ [MUSIC] Pause/Play Select music data Stop Adjust volume Screen layout and operations for Mute/Disable Play previous song/ MUSIC Player screen Return to beginning of song MUSIC Player screen layout q (for at least 1 second) Fast reverse...

  • Page 76: I-Appli/I-Widget

    Activating Widget Appli i-appli/i-Widget i-Widget is a convenient function used to easily access to frequently used contents Activating i-appli and tools (Widget Appli) such as calculator/ clock, memo, and stock prices. i-appli is software for the i-mode compatible Widget Appli can be added by downloading terminal.

  • Page 77: I-Motion/Movie

    Playing movies downloaded i-motion/Movie from sites Play movies provided in portal sites or Playing i-motion downloaded movie dedicated sites on the Internet with from sites Internet movie player of the FOMA terminal. Internet movie player supports the playback of i-motion refers to image, voice and music Windows Media Video and Windows Media data.
  • Page 78 More Convenient DOCOMO shall not be liable for any loss or Osaifu-Keitai change of data in the IC card or other damages of Osaifu-Keitai service caused by any reason such as malfunctions and upgrading. Osaifu-Keitai/ToruCa When the FOMA terminal is stolen or lost,...
  • Page 79 (information, i-schedule, etc.). ® “ひつじのしつじくん ” Packet communication charges are incurred for ©NTT DOCOMO receiving information excluding some cases. Packet communication charges are incurred for Displaying i-concier screen using detailed information. Packet communication charges are incurred for...

  • Page 80: Convenient Tools

    Using bar code reader Convenient Tools In the Normal menu, [CAMERA/TV/ MUSIC]/[Camera]/[Scanning Using schedules camera]/[Bar code reader] Be sure to set the date and subject. Display bar code to be scanned in For Normal the center of the screen/t In the Normal menu, [Tool]/ Position the camera 10 cm or more from the bar code (JAN/QR codes).

  • Page 81: Connecting With Bluetooth Devices

    Using Wi-Fi Registering Bluetooth devices on FOMA terminal The FOMA terminal supports Wi-Fi and To register a Bluetooth device, the Bluetooth allows you to connect to the Internet using passkey must be entered. Before starting the Full Browser via the access point at home or registration, enter the same user-specified 4- to public wireless LAN service.
  • Page 82 C Setting use of access point mode Using client mode In the Normal menu, [Tool]/ You can connect to the access point at home or [Wi-Fi]/[AP mode (base unit)] public wireless LAN service via Wi-Fi and use the Internet. The access point mode screen appears. C Setting use of client mode Select an item [Start AP mode]/[Start AP mode (local)]...

  • Page 83: Data Management

    Back up the data saved in a microSD Card and microSD Card. In addition, for microSD Cards that are not provided in the sites, some of them store in another place. DOCOMO shall not be liable for any loss or change of the saved data. may not work.
  • Page 84 Inserting/Removing microSD Card Copying data to microSD Card/ FOMA terminal Slowly insert the microSD Card with the metal terminal side turned Example: i-motion In the Normal menu, [Data box]/ Push slowly with a finger until a click is [i-motion/Movie] (/[bmicroSD])* heard.
  • Page 85 Sending and receiving data via Ir Receiving data communication In the Normal menu, [Tool]/ [Infrared/iC communications]/ [Receive infrared data] Select the receiving method [Receive]/[Yes] [Receive all]/enter the terminal security code/enter the same authentication 15° password as the sender’s/[Yes] Infrared port 15°...

  • Page 86: Receiving Data

    In stand-by, place the b mark on which is convenient for using data communication that of the other party’s FOMA of DOCOMO. Easily set the PC depending on the terminal subscription. In addition, use the charge counter function to check the approximate amounts of data [Yes] communication or usage fee.
  • Page 87 “Repairs” (in Japanese only) on the charging or when performing i-appli, back of this manual or a repair center that DOCOMO – making a videophone call or watching 1Seg specifies.
  • Page 88 Not activated by touching or pressing keys In crowded place, heavy telephone/mail traffic may be caused and make it difficult to Make sure All lock is not set. P. 47 get a connection. In such case, [Please – Make sure the FOMA terminal is not turned P.

  • Page 89: Replacement Parts

    • Decorations are made to the FOMA terminal and accessories other than those specified by with adhesive agent DOCOMO will also incur a fee, even during the • Exterior parts are replaced with those which warranty period. are not standard DOCOMO product...
  • Page 90 If updating software is necessary, check the DOCOMO website or “お客様サポート” (user support) (in Japanese only) on iMenu for updates. When updating, select “Auto-update”, “Now update” or “Reserve”.
  • Page 91 Starting software update from icon terminal contains phonebook, camera image, When the software is automatically downloaded, downloaded data, etc. However, DOCOMO ] appears in the stand-by display. cannot protect some data that could be lost due to malfunction, damage, water exposure and so ] appears in the stand-by on.
  • Page 92 C Displaying scanned results Updating pattern definitions Level 0 Level 1 First, update pattern definitions to bring them up-to-date. In the Normal menu, [Setting]/ [Lock/Security]/[Scanning [OK]: To display/ [No]: To display/ activate/call activate/call function]/[Update] [Yes]: To cancel [Yes]/[Yes] operation Level 2 Level 3 [OK] when updating is completed Displaying scanned results...
  • Page 93 FOMA Indoor Booster Antenna (Stand Type) Some products may not be available in FOMA eco Solar Panel 01 certain areas. Contact a docomo Shop or *1 Refer to P. 31 for details on charging with an retailer for details. AC adapter.

  • Page 94: Mail Menu

    Mail Appendix Mail setting Check new mail/message setting Reply setting Menu list Blog/SNS settings Mail group When settings are reset by Reset (nP. 48), Address/Spam setting functions return to default settings (marked with Auto save setting when editing • Some items may include functions which do not SMS settings return to default settings.
  • Page 95 C i-appli menu CAMERA/TV/MUSIC 1Seg Activate 1Seg i-appli Program guide Software list 1Seg image/video i-appli call logs TV timer list i-appli run information Start failure hist Recording result Abnormal exit hist TVlink Security error hist Channel setting Trace information User setting i-appli setting Sound effect volume MUSIC Player...
  • Page 96 Common phrases/ Common phrases Wi-Fi Client mode (sub) Store word Store word AP mode (base unit) Download dictionary Home network setting Contact DOCOMO ドコモ総合案内 ・ 受付 Compass ドコモ故障問合せ Wellness Check no. of steps C TEL function menu Register profile Settings...

  • Page 97: Setting Menu

    TEL function TEL function Record message/Voice Record message list Melody Call Voice memo list Voice mail service Activate memo Record voice memo Ring time Record message Deactivate Dialed/Received calls Received calls Check setting Redial Play messages Dial/Receive call Nuisance call blocking Setting Check messages setting...
  • Page 98 Setting Setting Sound/Vibration/ Ring tone External connection USB mode Other sounds Bluetooth Manner Adjust volume Wi-Fi Speaker booster set Femtocell Vibration mode Data exchange settings Silent mode Other setting Self mode Motion silent Touch panel ON/OFF BGM play Initial setting Machi-chara chat setting Clean Up Backlight/Illumination...

  • Page 99: Other Functions

    C Osaifu-Keitai menu Map/Overseas Map&GPS setting/ Loc. history Osaifu-Keitai Map setting history IC card content GPS button setting DCMX Request permit/deny ToruCa AUTO-GPS IC card lock setting IC card lock Positioning mode setting Timed lock LCS clients list Programed activation Service setting IC lock(power-off) Service host URL setting...
  • Page 100 Main display: Approx. 3.4 inches Size C Package Sub display: Approx. 1.4 inches Display Product name SH-10C Main display: 409,920 Approx. 113 (H) × pixels (480 × 854 dots) Pixels Approx. 52 (W) × Approx. Sub display: 12,288 Size 15.5 (D) mm (Approx. 22 pixels (192 ×...
  • Page 101 *7, 8 Approx. 1,200 shots Meets IEEE 802.11b/g/n Number of still Wireless LAN (2.4 GHz) Approx. 60,000 shots pictures (when saved in 2 GB “Chaku-uta” is a registered trademark of the Sony recorded microSD Card) Music Entertainment (Japan) Inc. 16M: 3 shots/10M: *1 Continuous talk time is an estimate of the time 3 shots/5M: 3 shots/3M: during which you can communicate on a phone in a...

  • Page 102: Battery Pack

    C Number of saved/registered/ *9 Image size: VGA (640 × 480 dots)/Image quality: HIGH QUALITY/File size limit: Unrestricted/Type: protected entries in the FOMA Image + voice terminal *10 File format: AAC format *11 File format: WMA format Number of Number *12 When still picture, moving picture, music, melody, entries to of entries...
  • Page 103 Data type of Mobile Phone be saved/ to be registered protected This model SH-10C mobile phone complies with Download dictionary – Japanese technical regulations and international *2, 8 i-appli – guidelines regarding exposure to radio waves.
  • Page 104 The World Health Organization has stated that present only) scientific information does not indicate the need for any NTT DOCOMO, INC. Website: special precautions for the use of mobile devices. They http://www.nttdocomo.co.jp/english/product/sar/ note that if you want to reduce your exposure then you...
  • Page 105 Hereby, Sharp Telecommunications of Europe Ltd, declares that this SH-10C is in compliance with the However, there is no guarantee that interference will not essential requirements and other relevant provisions of occur in a particular installation;...

  • Page 106: Special Features

    The exposure standard for wireless handsets employs About Wi-Fi a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC ® Wi-Fi Alliance conducts an authentication test is 1.6 W/kg. based on wireless LAN specification IEEE The tests are performed in positions and locations (e.g., 802.11 to guarantee the mutual connectivity of at the ear and worn on the body) as required by the...
  • Page 107 “WORLD WING”, “WORLD CALL”, “Data Security own risk and expense. For details on the Service”, “OFFICEED”, “i-area”, “2in1”, “docomo procedures, contact the Ministry of Economy, PRIME series”, the “i-mode” logo, the “i-appli” logo...
  • Page 108 ® ® ® b is a registered trademark of FeliCa Networks, Microsoft , Windows , Windows Media , Windows ® ® Vista and PowerPoint are trademarks or Inc. registered trademarks of Microsoft Corporation in Manufactured under license from Dolby the United States and/or other countries. Laboratories.
  • Page 109 iWnn of OMRON SOFTWARE Co., Ltd. is used for For details on other intended uses, contact MPEG conversion methods for Japanese language, and for LA, LLC. phrase prediction methods for English. This product is licensed under the MPEG-4 Systems iWnn© OMRON SOFTWARE Co., Ltd. 2008-2011 Patent Portfolio License for encoding in compliance All Rights Reserved.
  • Page 110 The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade names are those of their This product uses the GestureTek technology.
  • Page 111 Internet dictionary embedded in this product uses THIS SOFTWARE IS PROVIDED BY THE the BSD license. COPYRIGHT HOLDERS AND CONTRIBUTORS Copyright © 2002,2003, Stefan Haustein, “AS IS” AND ANY EXPRESS OR IMPLIED Oberhausen, Rhld., Germany All rights reserved WARRANTIES, INCLUDING, BUT NOT LIMITED •...
  • Page 112 The HMM-Based Speech Synthesis Engine THIS SOFTWARE IS PROVIDED BY THE embedded in this product uses the Simplified BSD COPYRIGHT HOLDERS AND CONTRIBUTORS License. “AS IS” AND ANY EXPRESS OR IMPLIED The HMM-Based Speech Synthesis System (HTS) WARRANTIES, INCLUDING, BUT NOT LIMITED hts_engine API developed by HTS Working Group TO, THE IMPLIED WARRANTIES OF http://hts-engine.sourceforge.net/...

  • Page 113: Index

    Before using camera..... . 66 DOCOMO service setting ....64 Bluetooth.
  • Page 114 Image/i-appli......42 i-mode ....... . . 59 i-mode fault diagnosis site .
  • Page 115 Melody Call ......51 Play shot moving pictures ....67 Menu list .
  • Page 116 What you can do ..... . 23 What you can do with SH-10C ....3 Terminal security code .
  • Page 117 ※ You will need your “docomo ID/Password” to access the site from PC. ※ If you do not have or you have forgotten your “Network Security Code” or “docomo ID/Password”, contact the number listed in General Inquiries on the back of this manual.
  • Page 118 ’11.5 (1st Edition) 11E SM118 ...
  • Page 119 Connecting up Wi-Fi compatible PC ......... . 13 Set network transmission with DOCOMO Connection Manager ..... 14 Set network transmission without using DOCOMO Connection Manager .

  • Page 120: Data Communication

    By using access points that are compatible with the FOMA packet communication, such as the DOCOMO Internet connection services “mopera U”, the data can be received and sent at speeds up to 7.2 Mbps and 5.7 Mbps respectively (A best-effort system is provided in which communication speeds vary depending on the communication environment and network traffic conditions).

  • Page 121: Before Using Data Communication

    Display resolution 800 × 600 dots or more and High Color 16 bits or more are recommended 1024 × 600 dots or more for DOCOMO Connection Manager (1024 × 768 dots or more is recommended) Windows XP, Windows Vista, Windows 7 (all Japanese versions)

  • Page 122: Flow Of Setup For Data Transfer (Obex ™ Communication)

    The operation in an environment with an upgraded, added or changed OS cannot be guaranteed. Depending on the operating environment, the use of the software may not be possible. DOCOMO holds no responsibility for responding to inquiries or guaranteeing operation in environments other than those specified above.

  • Page 123: Flow Of Setup For Data Communication

    Connect the FOMA terminal wirelessly to your PC file” (Driver) using Bluetooth function (nP. 11) Download and install the “FOMA communication configuration file” (Driver) from the DOCOMO website (nP. 7) Connect up PC to the FOMA terminal using FOMA USB Cable with Charge Function 02 (sold separately) (nP.
  • Page 124 FOMA communication configuration file from the DOCOMO website is required (nP. 7 to P. 10). If installation fails and [FOMA SH10C] is not listed in the screens of step 3 of “Confirming installed FOMA communication configuration file (Driver)”...

  • Page 125: Connecting Up Pc To The Foma Terminal

    Connecting up PC to the FOMA terminal Connect the FOMA terminal to your PC with both devices turned on. If the FOMA terminal is connected to your PC, [x] appears on the FOMA terminal screen. If the FOMA communication configuration file is not installed, install the file before connecting the FOMA terminal to the PC (nP.

  • Page 126: Installing Foma Communication Configuration File

    • When User Account Control screen appears, click [はい] (Yes) or [許可] (Permitted) and [続行] (Continue). Perform steps 1 to 6 first, and then connect the FOMA terminal to the PC. Download FOMA communication configuration file (Driver) from the DOCOMO website.
  • Page 127 Click [OK] when [FOMA SH10Cドライバのインストールが完了しました。 ] (Installation of FOMA SH10C driver is completed.) appears. : Installation of the FOMA communication configuration file finishes. Installation may take a few minutes. When [プログラム互換性アシスタント] (Program Compatibility Assistant) appears, click [このプログラムは正しくイ ンストールされました] (This program installed correctly). When a message prompting to restart the PC appears, follow the instruction and restart.
  • Page 128 Click on each device, and confirm the name of the installed device. Confirm that the names of all the installed devices are displayed for [ユニバーサル シリアル バス コントローラー] (Universal Serial Bus controllers), [ポート (COMとLPT)] (Ports (COM and LPT)) and [モデム] (Modems). : The following drivers are installed when the FOMA communication configuration file is installed.
  • Page 129 Double-click [FOMA SH10C USB Driver]. For Windows XP Select [FOMA SH10C USB Driver]. Click [変更と削除] (Change/Remove). When [FOMA SH10C ドライバーのアンインストールを行います。 ] (Uninstall FOMA SH10C driver.) appears, click [はい] (Yes). : Uninstallation of the FOMA communication configuration file begins. For Windows Vista and Windows XP : Click [はい] (Yes) and proceed to step 6.

  • Page 130: Preparing Bluetooth Connection

    Preparing Bluetooth connection Make data communication by connecting the FOMA terminal wirelessly to a Bluetooth compatible When making data communication using Bluetooth function, the communication speeds of FOMA terminal is for HIGH-SPEED, however, the data communication may not be available at maximum speed because the communication speeds of Bluetooth function have limitations.
  • Page 131 Confirming modem Before setting communication, confirm the name and COM port number of the modem set for connecting the dial-up service. Operate the PC. Example: Confirming Windows 7 drivers The screens are different for Windows Vista and Windows XP. Click [スタート] (Start) menu/[コントロールパネル] (Control panel) and click [システムとセキュリティ] (System and security).

  • Page 132: Connecting Up Wi-Fi Compatible Pc

    Connecting up Wi-Fi compatible PC Connect the Wi-Fi compatible PC and the FOMA terminal using Wi-Fi connection and use packet communication by setting the FOMA terminal as an access point. Set the FOMA terminal to an access point mode in advance. Refer to “Manual (detailed edition)” (in Japanese only) of the FOMA terminal for details on the setting of the access point mode, etc.

  • Page 133: Set Network Transmission With Docomo Connection Manager

    “DOCOMO Connection Manager” is a software which is convenient for using data communication of DOCOMO. Easily set the PC depending on the subscription. In addition, use the charge counter function to check the approximate amounts of data communication or usage fee.
  • Page 134 Click the [接続] (Connection) tab and then select [ダ イヤルしない] (No). Click [OK]. Logon with a user which uses DOCOMO Connection Manager. For Windows 7 and Windows Vista : Administrator account is required. If PC is logged on with other than manager account, a screen to enter the user name and password appears during install.

  • Page 135: Installing Docomo Connection Manager

    In addition, when using Mzone (DOCOMO public wireless LAN service) with this software, uninstall the following public wireless LAN connection software. ※ If the following software is installed simultaneously, Mzone connection with this software is not available. U public wireless LAN utility software...
  • Page 136 [使用許諾契約の条項に同意します] (Agree to articles of the user licensing agreement) and then click [次へ] (Next) to agree. : This is the user licensing agreement for DOCOMO Connection Manager. Click [キャンセル] (Cancel) to cancel the installation. Confirm the destination program folder and click [次へ] (Next).
  • Page 137 For Windows XP, when MSXML6 and Wireless LAN API are not installed, their installation is required before installing DOCOMO Connection Manager. When confirmation screen appears, click [Install] and install MSXML6 and Wireless LAN API. Restart Windows after installation of MSXML6 and Wireless LAN API is completed, then...
  • Page 138 Internet. Refer to “DOCOMO Connection Manager operation manual” for details. Communication is not disconnected by only ending the internet browser or mail software. Be sure to disconnect the communication with [切断する] (Disconnect) button of DOCOMO Connection Manager when communication is not in use.

  • Page 139: Set Network Transmission Without Using Docomo Connection Manager

    AT commands are commands for controlling the modem. The FOMA terminal is compliant with AT commands and also supports some extended commands, as well as some unique AT commands. Making host (APN) settings is not necessary when using mopera U or mopera, the DOCOMO Internet connection service, since it is set as the default.
  • Page 140 Enter a name (such as a host name) in the [名前] (Name) field and click [OK]. : The advanced settings screen for phone number appears. Select [FOMA SH10C] from [接続方法] (Connection method), enter a temporary number in the [電話番号] (Phone number) field that does not actually exist (such as [0]), and click [OK].
  • Page 141 When confirming APN settings using AT commands : AT+CGDCONT?o Refer to P. 35 for details on AT commands. Confirm that [OK] appears and select [ハイパーターミナルの終了] (Exit hyper terminal) from the [ファイル] (File) menu. : Hyper terminal ends. : [セッション×××を保存しますか？] (Save session xxx?) appears.
  • Page 142 Send Enter “AT*DGPIR=0” to return “186” (Send)/“184” (Not send) to [Not set] (default setting). Set [Send] for sending caller ID when using mopera U or mopera, the DOCOMO Internet connection service. Setting dial-up network Set the host and TCP/IP protocol. Contact the Internet service provider or network administrator for details on settings.
  • Page 143 ■ On Windows 7, use “ネットワークの接続ウィザード” (Network connection wizard) to set the host (APN). Example: Using <cid>=3 to connect to mopera U, the DOCOMO Internet connection service on Windows 7 The screens are different for Windows Vista. Subscription to mopera U requires a charge.
  • Page 144 Click [スタート] (Start) menu/[コントロールパネル] (Control panel). For Windows Vista Click [スタート] (Start) menu/[ネットワーク] (Networking). Click [ネットワークと共有センター] (Network and sharing center)/[ネットワーク接続の管 理] (Manage network connections) and proceed to step 12. Click [ネットワークとインターネット] (Network and Internet). Click [ネットワークと共有センター] (Network and sharing center)/[アダプター の設定の変更] (Change adapter setting) in [タスク] (Task).
  • Page 145 On Windows XP, use “ネットワークの接続ウィザード” (Network connection wizard) to set both the host (APN) and TCP/IP protocol. Example: Using <cid>=3 to connect to mopera U, the DOCOMO Internet connection service Subscription to mopera U requires a charge. Click [スタート] (Start) menu/[すべてのプログラム] (All programs)/[アクセサ...
  • Page 146 Enter the host number in the [電話番号] (Phone number) field and click [次へ] (Next). : The Internet account information screen appears. : To connect to <cid>=3 (mopera U), enter “*99***3#”. Set options as shown in the example screen and click [次へ] (Next). : The new connection wizard complete screen appears.
  • Page 147 Click the [ネットワーク] (Networking) tab, confirm all settings and click [設定] (Settings). : Set [呼び出すダイヤルアップサーバーの種類] (Type of dial-up server to call) to [PPP: Windows95/98/NT4/2000, Internet]. : In the [この接続は次の項目を使用します] (Components checked are used by this connection) field, E should appear only for [インターネットプロ トコル...
  • Page 148 Double-click the connection icon. : The connection screen appears. : Alternatively, select the host icon and then select [接 続] (Connect) in the [ファイル] (File) menu to display the connection screen. Confirm the settings and click [ダイヤル] (Dial-up). : The FOMA is connected to the host. : The phone number set in “Setting dial-up network”...

  • Page 149: Sending And Receiving Data (Obex ™ Communication)

    ™ Sending and receiving data (OBEX communication) Sending/Receiving FOMA terminal data to/from a PC The FOMA terminal has OBEX ™ function as a data communication protocol. Connect the FOMA terminal to your PC via FOMA USB Cable with Charge Function 02 (sold separately), and the data communication (data communication with OBEX ™...
  • Page 150 Sending single data item (Write 1) Send data from a PC to a FOMA terminal one item at a time. Sending one item at a time from a FOMA terminal to a PC is not possible. Data transfer operating methods differ depending on the software used. Refer to the software manual for details.

  • Page 151: List Of At Command

    List of AT command AT commands AT commands are commands used to set the FOMA terminal functions from a PC. When AT commands are entered from a PC, the FOMA terminal performs the corresponding operations. AT command input format ■ AT commands must always start with “AT”.
  • Page 152 List of AT command [M]: AT commands that can be used with the FOMA SH10C Modem Port. Execution AT command Overview Parameter/Explanation example The modem function of the FOMA terminal can be controlled by adding commands in the ― list to the end of this command. ※...
  • Page 153 Execution AT command Overview Parameter/Explanation example AT*DGAPL=<n> Sets host (APN) to accept Adds or deletes from Accept calls list with <n> AT*DGAPL=0,1o [,<cid>] transmissions for incoming packet parameter. If <cid> parameter is abbreviated, communications. APN settings adds (<n>=0) or deletes (<n>=1) all of <cid> AT*DGAPL?o use <cid>...
  • Page 154 Execution AT command Overview Parameter/Explanation example AT+CBC Inquires the battery status. The result from this command is in the AT+CBCo following format. +CBC:0,80 +CBC:<bcs>,<bcl> <bcs> 0 : The battery operates the FOMA terminal 1 : Charging the battery 2 : The battery is unconnected 3 : Reducing the power <bcl>...
  • Page 155 Execution AT command Overview Parameter/Explanation example AT+CLIP=<n> Shows PC calling number when <n> AT+CLIP=0o receiving 64K data 0 : Does not output results (default setting) communication. 1 : Outputs results Displays +CLIP:<n>,<m> for “AT+CLIP?”. AT+CLIP?o <m> +CLIP:0,1 0 : NW setting to not send own number during transmissions 1 : NW setting to send own number during transmissions...
  • Page 156 Execution AT command Overview Parameter/Explanation example AT+COPS=[<m Selects a telecommunications <mode> AT+COPS ode>[,<format>[ carrier to be connected. 0 : Auto (Automatically searches network and =1,2,“44F001” ,<oper>]]] switch telecommunications carriers) 1 : Manual (Connects to the telecommunications carrier specified in <oper>) 2 : Cancels (disconnects) the connection to (Connects to the telecommunications carrier...
  • Page 157 Execution AT command Overview Parameter/Explanation example AT+CR=<mode> Sets whether to display packet <mode> AT+CR=1o communication/64K data 0 : Does not display when line is connected communication before (default setting) ATD*99***1# “CONNECT” result code is 1 : Displays when line is connected +CR:GPRS displayed during line connection.
  • Page 158 +++ (Does not ― appear) ATHo NO CARRIER ATI<n> Displays the verification code. n=0 : NTT DoCoMo ATI0o n=1 : Displays abbreviated product name NTT DoCoMo (FOMA SH10C) n=2 : Displays the product version in a format such as “VerX.XX”...
  • Page 159 Execution AT command Overview Parameter/Explanation example Returns to online data mode from ATOo online command mode during ― CONNECT communication. ATQ<n> Sets whether to display result n=0 : Displays result codes (default setting) ATQ0o codes. n=1 : Does not display result codes ATV<n>...
  • Page 160 Execution AT command Overview Parameter/Explanation example ATS5=<n> Sets the backspace (BS) When detected while entering an AT ATS5=8o character. command, the last character in the input buffer is deleted. The settings cannot be ATS5?o changed (default setting: n=8). ATS6=<n> Sets pause time (seconds) until Sets a register, but has no other effect.
  • Page 161 Numerical display Text display Reason SIM not inserted UIM not inserted. SIM wrong A non-DOCOMO SIM (IC card equivalent to UIM) is inserted. incorrect password Password is incorrect. unknown Unknown error occurred. More on AT commands Command name: +CGDCONT= [parameter] ■...
  • Page 162 Operation when parameter is abbreviated AT+CGDCONT= Clears all <cid> settings. Resets <cid>=1 to 4 setting to default value. AT+CGDCONT=<cid> Clears specified <cid> setting. Resets <cid>=1 to 4 setting to default value. AT+CGDCONT=? Displays list of values that can be set. AT+CGDCONT? Displays current settings.
  • Page 163 Command name: +CGEQREQ=[parameter] ■ Overview Sets QoS (Quality of Service) required of the network when establishing PPP packet communication. Not stored in FOMA terminal’s memory with AT&W commands. Not reset with AT&F or ATZ commands. Syntax AT+CGEQREQ=[<cid> [,<Traffic class> [,<Maximum bitrate UL> [,<Maximum bitrate DL> [,,,,<Maximum SDU size>]]]]]o Parameter description This setting is assigned to each cid by default value.
  • Page 164 Numerical display Text display Meaning NO ANSWER Connection completed. The server connection timed out. RESTRICTION Network restricted. DELAYED Redial restricted. Extended result codes ■ Numerical display Text display Meaning CONNECT 1200 FOMA terminal and PC connected at 1,200 bps. CONNECT 2400 FOMA terminal and PC connected at 2,400 bps.
  • Page 165 Kuten Code List ’11.5 (1st Edition)
  • Page 166 Use four-digit kuten codes to enter kanji, hiragana, katakana, symbol, and alphanumeric characters. Each kuten code corresponds to a particular character. Refer to “Inputting Kuten Code” of the user’s guide for details. If an unregistered kuten code is entered, either a space or nothing will be entered. Some entries in the kuten code list may differ from on the screen.
  • Page 167 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 肩...
  • Page 168 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 枠...
  • Page 169 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 浚...

Table of Contents