Docomo SH-10C Instruction Manual page 140

3
Enter a name (such as a host name) in
the [名前] (Name) field and click [OK].
: The advanced settings screen for phone number
appears.
4
Select [FOMA SH10C] from [接続方法]
(Connection method), enter a
temporary number in the [電話番号]
(Phone number) field that does not
actually exist (such as [0]), and click
[OK].
: For the area code, the default setting in Windows
(such as [03]), appears. Set any number for the area
code, since it is not related to the host (APN) setting.
5
When the connection screen appears, click [キャンセル] (Cancel).
6
Enter host (APN) and press o.
: Enter host (APN) in the format:
AT+CGDCONT=<cid>, "<PDP_type>","APN"
(nP. 35).
<cid> : Enter any of 5 to 10.
"<PDP_type>" : Enter "PPP" or "IP".
"APN" : Enter the host (APN) enclosed in " ".
: If [OK] appears, the APN is set successfully.
: To check the current host (APN) setting, enter
AT+CGDCONT?o, and the settings appear in a
list.
When nothing appears on the screen when
AT commands are entered
: ATE1o
Refer to P. 39 for details on AT commands.
When resetting APN settings using AT commands
: AT+CGDCONT=o
: AT+CGDCONT=<cid>o : To reset only specific cids
When reset, <cid>=1 returns to "mopera.ne.jp" (default setting), <cid>=2 or 3 returns to "mopera.net"
(default setting), <cid>=4 returns to "mpr.ex-pkt.net" (default setting) and settings for <cid>=5 to 10 are
unregistered.
: To reset all the cids
21