Page 2
The user hereby agrees that the user shall be solely responsible for Thank you for purchasing the FOMA SH906i. the result of the use of SSL. Neither DoCoMo nor the certifier as Make sure thoroughly read this manual and the manuals...
Page 3
Note that “FOMA SH906i” is referred to as the “FOMA terminal” in this manual. Viewing/Searching this manual This manual describes functions using the microSD Card. Please note that microSD Card are sold separately. For details on microSD This manual uses illustrations and icons to explain Card nP.
As an example, how to look up the Alarm function using the Index, Easy search, and Indexed pages are explained below. Content differs from actual pages in this manual. Index nP. 520 Use this when you know the function or service name, or to search for Settings .
Page 5
This is the function name as it appears in the index. Necessary information, precautions and other Alarm Note Sounding alarm at set time When multiple alarms are set to the same time, they are prioritized information for using functions in the following order. are explained.
Easy Search Changing melody and illumination Setting the ring tone for the caller ...(Select ring tone) 99 Use this feature to find simple description for any function. Changing the ring tone ....(Select ring tone) 108 Adjusting the ring tone volume .
Page 7
Using the camera Other features Shooting panoramic pictures ....(Panorama) 154 Using the desktop clock ....(Desktop clock) 116 Changing the image size .
Browser, Internet movie player, etc. P. 301 Prepare for data communication, Prepare for PC Connection data transfer (OBEX™ communication), AT Image Viewer, Edit image, i-motion player, commands, CD-ROM, DoCoMo keitai P. 441 Data Display/ Edit movie, Video player, Chara-den player, datalink, etc. Edit/...
The same FOMA terminal, phone number and mail address as those used in Japan are available overseas (supporting GSM and FOMA is the name of DoCoMo’s service based on W-CDMA, 3G areas). In addition, voice/Videophone calls, i-mode, i-mode which is recognized as a global standard for third generation mail, SMS and network services are available.
Page 11
Change the screens such as your favorite stand-by display and Based on the acquired location information with GPS, display the menu screens collectively. With FOMA SH906i, sort the order to map or search peripheral area information of the present location, display the menus according to the usage frequency and or navigate to a destination.
Page 12
1Seg Maximizing use of the FOMA SH906i ■ 1Seg nP. 285 Watch “1Seg”, which is digital terrestrial broadcasting for mobile The functions of the FOMA SH906i are described below. devices. nP. 60, P. 62 Videophone Have conversations with the other party who is far away while viewing each other’s image.
Page 13
MUSIC B mode A mode Phone number: 090-BBBB-BBBB Player. Uta-hodai is available. Also play back Phone number: 090-AAAA-AAAA Address: XXB@docomo.ne.jp Address: XXA@docomo.ne.jp the data saved to the [Multimedia] folder of Phonebook: For B mode Phonebook: For A mode i-motion.
Page 14
The following symbols indicate specific directions. Safety precautions (to be strictly Indicates a prohibited action. followed) Before use, read these “Safety precautions” carefully and use your FOMA properly. Indicates not to disassemble the device. Keep this manual in a safe place for future reference. These safety precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.
In addition, the battery pack ※ For information on other compatible Make sure to turn off the may leak, overheat, explode, catch fire or suffer products, contact a DoCoMo Shop or mobile phone in locations performance loss and a reduced service life. retailer.
If you notice anything If being used by a child, have Do not point the illuminated unusual, such as an unusual a guardian teach him/her the light directly at someone’s odor, overheating, proper handling procedures. eyes. discoloration or deformation In addition, check that the May damage eyesight.
Page 17
Do not shine the light at If you have a weak heart, In case that the display part anyone driving a car or take extra precautions when or camera lens is damaged, other vehicles. setting functions such as make sure to pay attention the Vibrator and Ring tone to a broken glass and the This may prevent a driver from driving safely...
Page 18
When using Motion If the display is broken and Using the FOMA terminal in an tracking, confirm the safety the liquid crystal then leaks, automobile may sometimes do not lick or inhale the liquid of surroundings, hold the affect the electronic equipment or get the liquid on your skin.
Check immediately stop using it. them to a DoCoMo Shop, retailer or that the battery pack is The battery pack may leak, overheat, institution that handles used batteries in your explode or catch fire.
If the battery fluid comes Take care not to Always use the specified into contact with your skin short-circuit the charging power supply and voltage. or clothing, stop using the terminal when connected to FOMA terminal immediately a power outlet or cigarette Using the incorrect voltage may cause a fire or malfunction.
Where a medical facility has specific Always grasp the power Handling the FOMA card instructions prohibiting the carrying and plug when unplugging the use of mobile phones, observe those adapters (chargers) from Caution instructions strictly. the power outlet or If Auto power ON function is set to ON, cigarette lighter socket.
Occasionally clean terminals with a Patients receiving medical dry cotton swab. treatment away from a Handling precautions Unclean terminals may result in poor hospital or medical facility connections and loss of power. (e.g. home treatment) who Additionally, keep terminal clean with a dry General notes are using electronic cloth or cotton swab to prevent charge...
Page 23
35°C. remove the card or turn off the terminal. FOMA terminal. Do not charge battery pack in the DoCoMo shall not be liable for any loss of content. May cause data loss or malfunction. following locations: When connecting an external...
Page 24
Keep a separate memo and note communication using Bluetooth information stored in the FOMA card. function. DoCoMo shall not be liable for any loss of Even if any leak of data or content. information occurs while making To protect the environment, please...
Page 25
Be careful when using the FOMA Cautions on using Bluetooth FeliCa reader/writer terminal while driving a motor devices Bluetooth operates at radio The FeliCa reader/writer function in vehicle. frequencies assigned to the the FOMA terminal uses weak While driving, using a mobile phone in in-house radio stations for a mobile hand is regarded as a punishable act.
“DCMX” logo, the “iD” logo, the “HIGH-SPEED” logo are Java and all Java-based trademarks and logos are trademarks or trademarks or registered trademarks of NTT DoCoMo, Inc. registered trademarks of Sun Microsystems, Inc. in the U.S.A. and Free Dial logo mark is a registered trademark of NTT other countries.
Page 27
microSDHC Logo is a trademark. Napster is a registered trademark of Napster, LLC. and/or its affiliates in the US and/or other countries. Dolby and the double-D symbol are registered trademarks of Dolby Powered by JBlend™ Copyright 2002-2008 Aplix Laboratories. Corporation. All rights reserved. ®...
Page 28
This product is licensed under the MPEG-4 Systems Patent Contains Adobe ® Flash ® Lite™ and Adobe ® Portfolio License for encoding in compliance with the MPEG-4 Reader LE technology by Adobe Systems Systems Standard. An additional license and payment of royalties Incorporated are necessary in the following cases.
Page 29
The Bluetooth word mark and logos are owned by Bluetooth SIG, DAMAGES (INCLUDING, BUT NOT LIMITED TO, Inc. and any use of such marks by NTT DoCoMo, Inc. is under PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; license. Other trademarks and trade names are those of their LOSS OF USE, DATA, OR PROFITS;...
Page 30
Standard parts packaged with unit and main optional parts ■ Standard package ■ Main optional parts FOMA SH906i terminal Manual (this manual) FOMA AC Adapter 01/02 (includes warranty and Back (includes warranty and user’s guide) Cover SH21) ※ Quick manual can be found on P. 534.
Page 31
Before Using the Handset Component names and functions ......30 Viewing the display ........34 Optical TOUCH CRUISER .
Component names and functions ※ Key illustrations are examples and may look different from actual keys.
Page 33
1Earpiece Press for 1+ seconds to use the Eco mode (Power saver) Listen to the other party’s voice. (nP. 117). Listen to Record message/Voice memo. 9Charger terminal (nP. 53) 2Brightness sensor (nP. 118) Terminal for recharging with the desktop holder. The sensor detects the light of the surrounding area and amicroSD Card slot (nP.
Page 34
hDial/Text entry keys 1 to 9, 0, *, # nFOMA antenna Press to enter a phone number or text. An antenna is built in. To speak in better conditions, do not cover Press * for 1+ seconds to use the Public mode (Drive mode) the antenna area by hand.
How to open the FOMA terminal Cautions when rotating To use the FOMA terminal, open it (normal position) or use it in the viewer position. When carrying, keeping the FOMA terminal closed as shown in the diagram for step 1 is recommended. ■...
How to use the Multi-guide key and Operation SelAll/ClrAll Selects/Disables all selectable items (Up to 50 items can be selected/disabled guidance key depending on the function) Use to select or execute the menus that appear in the operation Page ▲/Page ▼ Scrolls the display by page guidance.
Page 37
2Battery level/Charging (nP. 54) 7Shortcut menu (nP. 393) " Appears when the function can be added to the Battery level Shortcut menu Charging 8i-mode mail/SMS/Area Mail received (nP. 205) Battery icon can be changed (nP. 121). Indicates the status of the i-mode mail/SMS/Area 3i-mode/Full Browser (nP.
Page 38
eSilent (nP. 109) lHands-free (nP. 61, P. 81, P. 87, P. 407) The phone ring volume [Silent] is set Hands-free in progress (red) (green) USB hands-free in progress fVibrator (nP. 111) Mute in progress (only when rotated the display) Vibration mode is set Bluetooth hands-free in progress gManner mode (nP.
Page 39
rFOMA card error The VeilView icon does not appear during International roaming or while 1Seg is recorded. Appears when FOMA card is malfunctioning or not x3G/GSM (nP. 453) inserted Appears when a card other than the FOMA card is (green) 3G network (Packet transmission available) inserted 3G network (Packet transmission not available) (red)
Page 40
Modem transmission Checking notices with stock icon Text memo (appears during data Calculator transmission) Display stock icons in stand-by when a call is missed or new mail is received. In stand-by, select stock icons to check notice details. Software update Manga&BookReader Number of entries Quick search...
Icon Message Page Optical TOUCH CRUISER Send loc - No resp P. 276 Send loc - Resp P. 276 Use the Optical TOUCH CRUISER to perform the same Send loc - Failed P. 276 operations as those for w of Multi-guide key (e.g. moving Charge limit exceeded P.
■ Moving the pointer Setting the Optical TOUCH CRUISER In the Custom menu screen or while i-mode or <TOUCH CRUISER set> Full Browser is connected, move the pointer (L, M, K, etc.) up/down, left/right or diagonally to ■ Setting whether to use the Optical TOUCH select an item.
Page 43
Operate the touch panel inside the following operating range of ■ Selecting keys touch panel. However, when a substitute image appears in the right In the touch menu, control keys and others, touch the displayed keys side of the screen, operate in the left side of the screen where to select it.
Page 44
While the camera (still picture/movie) is activated Touch menu Image size Fix camera shake The following functions can be activated from the touch menu. Full Browser 1Seg Camera Mail AF mode To zoom in Manga&BookReader Data box Picture light To zoom out For details on touch menu nP.
Page 45
While Full Browser is displayed To select a station by To display ChannelView searching a frequency To cancel connection To save Bookmark To select a station with UP (DOWN) Visual history Display Mode *1 Keep key touched to adjust the volume continuously. *2 Double-touch the touch panel while selecting a station by searching To view Bookmark list a frequency to stop selecting a station by searching a frequency.
■ Switching the set start menu temporarily Switch the start menu temporarily. When the stand-by display Menu settings and selections reappears, the start menu returns to the one set in Menu priority. Use the Shortcut menu to retrieve saved functions quickly. Other Set, change or save functions from the menu screens.
■ Retrieving from the Basic menu Retrieving a function from each start menu Example: Activating 1Seg by entering function numbers For details on the available functions nP. 458 Use w and the Optical TOUCH CRUISER in either start menu. Press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function.
Menu (touch menu) when in the viewer position Supportbook Displaying the Supportbook If the screen is switched from the normal position to the viewer position in the stand-by display, Custom menu, Basic menu, Shortcut menu or Use this function for unsure operations. others, the touch menu appears.
■ Removing FOMA card Hook a finger on the tab, pull the tray out (1) and Using a FOMA card remove the FOMA card (2). A FOMA card is an IC card that records personal information, Do not allow the FOMA card to fall when removing it. such as phone numbers.
Page 50
Decome-Anime Template FOMA card security functions e-book/e-dictionary/e-comic saved in the [Comic] folder <FOMA card security functions> File attached to i-mode mail other than the following The FOMA terminal has built-in FOMA card security functions (FOMA • ToruCa ・Phonebook ・Schedule card restriction functions) as functions for protecting personal data and •...
Page 51
About WORLD WING FOMA card security functions cannot be set for data received WORLD WING is a DoCoMo FOMA international roaming service using Ir exchange or data transmission functions, and still pictures/ that makes it possible to use the mobile phone number registered in movies, etc.
Reattach the back cover (5). Position the back cover as shown in the illustration and then Inserting and removing the battery push the back cover and slide into place. pack Use the battery pack SH17 exclusive to the FOMA terminal. Turn off the power, close the FOMA terminal, and hold it in your both hands before inserting or removing the battery pack.
Continuous FOMA/ 3G/GSM setting: When mobile: Approx. 395 hr stand-by Charging time 3G/GSM setting: When mobile: Approx. 365 hr AUTO At rest: Approx. 565 hr Cautions when charging 3G/GSM setting: At rest: Approx. 290 hr The battery pack is not fully charged at the time of purchase. Be sure AUTO to charge the battery using the exclusive AC or DC adapter (sold 1Seg watching time...
Page 54
To protect the environment, return used batteries to NTT [Read “FOMA AC adapter 01/02 (sold separately) and FOMA DoCoMo, any DoCoMo retailer, or a recycling agency. DC adapter 01/02 (sold separately) user’s guide” carefully.] Battery pack can be charged with FOMA terminal open or in the ■...
Page 55
When insert the AC adapter power plug into an Pull the adapter out of the outlet or cigarette lighter socket if it will outlet or insert the DC adapter power plug into a not be used for a long time. car cigarette lighter socket, charge start sound is Do not forcefully pull the external connector terminal cover.
Place the FOMA terminal into the desktop holder. Making the desktop holder stand up Charge start sound is heard, Charging LED Make the stand behind the desktop holder stand up so that illuminates, and charging starts. charging becomes available with the desktop holder stood up. Keeping the connector parallel with the desktop holder as Do not force to make the stand behind stand up.
Checking the battery level with sound and display Power ON/OFF Turning the power on and off In the Custom menu, select [Settings]/[General settings]/[Check status]/[Battery level]. Turning the power on Press H (for 2+ seconds). Graphic It may take some time for the wakeup Sound Three beeps Two beeps...
When a FOMA card is replaced with a new card, the terminal Initial setting security code (four to eight digits) must be entered after turning on Making the initial setting the terminal. If a correct terminal security code is entered, stand-by display appears.
When Auto time correction is set to [ON] The FOMA automatically adjusts the time by connecting to the Select the [Auto time correction] field/t/select DoCoMo network’s time information. the setting. When time difference is adjusted, [Time adjusted] appears. When Auto time correction is set to [ON], the time is sometimes not Select [ON]/i.
During overseas use, Japan time and local time (or time set in Note City) appear in the dual display except for the following cases. Notify caller ID cannot be set from outside the service area. When Auto time correction is set to [ON] and time correction information is not being received from an overseas network Related Operations When Auto time correction is set to [OFF] and City is set to the...
Page 61
Voice/Videophone Calls Making calls/Videophone calls When calls/Videophone calls cannot be answered/ could not be answered Using Videophone........60 Making calls/Videophone calls .
Appears while sending a still picture as a substitute image A Videophone communication is available only between terminals compatible with the DoCoMo Videophone. Appears while sending a camera image To talk while viewing each other’s image during a Videophone call,...
Note Making calls/Videophone calls When the 2in1 mode is set to [Dual mode], the screen for selecting a phone number appears after step 2. Select the phone number Calls may be interrupted even when the signal is strong (] from [Number A]/[Number B]. appears) and you are not moving.
Add to the phonebook during a voice call [Redial using voice call]: The other party’s handset is set to the Call Forwarding Service and the forwarding destination does <Add to phonebook> not support Videophone. During a voice call, press C/[Add to phonebook]/add [Busy with packet transmission]: The other party is performing a to the phonebook.
Calls received with Call Waiting cannot be switched from a voice call to a Videophone. Switching from a Videophone to a voice call Hands-free is disabled. Redial/Received calls Using Redials/Received calls The FOMA terminal keeps a record of the 30 most recent phone numbers to which calls were made (including PushTalk).
Page 66
Types of calls Note Even if a call is switched between a voice call and a Videophone, No icon Voice call the received call type depends on the type used when the call was Videophone call made or answered. 64K data communications (Only for Received calls) When a call is received from a caller using Dial-in, a number different from the caller’s Dial-in number may appear.
In the list screen/details screen, press C/[Display all]/ Charges are applied to the sender side. Not applied to the receiver side. [Limit display]. Refer to the DoCoMo website or “Mobile Phone User’s Guide Check the ringing time from Received calls <Ringing time>...
Page 68
Enter a message/t. On Redial voice call, Chaku-moji used when a Videophone was dialed will be automatically sent. ■ Enabling/Disabling a message display In the following setting, transmission charges are applied. <Message display> When the sending result does not appear even if the other party In the Custom menu, select [Settings]/[Other NW has sent Chaku-moji, due to the signal strength When a call is shorter than the set ringing time of the Set mute...
Send own no./No caller ID Pause dial Setting caller ID to send/not send Sending touch-tone signals for a single call Use services such as ticket reservations and bank balance inquiries, with simple operations by saving the combinations Specifications made when making a call take priority over the of phone numbers and messages (numbers) in the phonebook.
“General Inquiries” on the back of this manual. ■ Entering [+] to make an international call To make an international call through a company other than DoCoMo, Press 0 for 1+ seconds to enter [+]. contact the representative companies directly for instructions.
Setting numbers other than WORLD CALL Setting country codes <Set country code> <IDD prefix setting> Save up to 30 country codes to make international calls from overseas. Save up to ten international access codes used when international In the Custom menu, select [Settings]/[Phone calls are made from Japan.
Calling with prefixes Reconnect signal <Select prefix> Reconnecting disconnected calls In stand-by, enter a phone number/C. automatically In the phonebook entry details screen: Press C/[Number settings]. Reconnect signal is also available for PushTalk transmissions. In the details screen of Redials/Received calls: Press C. The amount of time that can elapse to reconnect varies depending on Select [Add prefix setting]/[Select prefix].
Bluetooth connection (wireless) is also available (nP. 407). When the caller does not send a caller ID, a non-disclosure Refer to the user’s guide of each product for details on hands-free reason message appears. devices. • [User unset]: When the caller purposely withholds caller ID •...
Switching takes approximately 5 seconds. Switching may take When the handset beeps during a voice call indicating an more time depending on the signal status. [Please wait for a incoming call while] appears and a guidance message is played. When any of services such as Voice Mail, Call Waiting or Call Forwarding is subscribed to and Set arrival act is set to “Activate”...
Set when folded Earpiece volume Closing the FOMA terminal to end/ Adjusting the volume hold calls Select from [Volume 1] to [Volume 10]. The volume remains at an adjusted level even when the handset is In the Custom menu, select [Settings]/[Phone turned off or the battery pack is removed.
Set on hold tone/Set hold tone Public mode (Drive mode) Setting the On hold/Hold tone Using the Public mode (Drive mode) Set the on hold guidance and hold tone that the other party The Public mode is an automatic answering service used to hears.
The FOMA terminal will not vibrate when i-mode mail, SMS, or Public mode (Power OFF) Message R/F is received even if the Vibration mode is set. Although Using the Public mode (Power OFF) a ring tone does not sound, the message is received automatically, and the received mail icon appears.
Arrival call actions while the Public mode (Drive mode/ When a voice call When a Videophone call Service is received is received Power OFF) and various network services are set Caller ID When the caller ID is not When the caller ID is not Arrival call actions while the Public mode (Drive mode/Power OFF) is Request sent, the Caller ID...
When there are three Record messages (voice calls) and two Record message (voice/Videophone calls) Record messages (Videophone), k appears and Record Recording messages when calls message does not respond when a voice/Videophone call is cannot be answered received. Delete unnecessary messages to reactivate Record message.
<V.phone reply image> Saved contents may be lost due to malfunctions, repairs or other handling of the FOMA terminal. DoCoMo shall not be liable for any In the Custom menu, select [Settings]/[Phone loss of content. It is recommended that a memo be kept of settings]/[Record message]/[V.phone reply image].
When the stock icon F (message) appears Returns to default setting when the original reply message is In stand-by, press t/select the stock icon F (Record deleted (nP. 79). message)/t/[Play]. Videophone reply image w appears for memos that have not been played. For images that can be sent n“Setting the image to send”...
Note (Related operations) While sending Chara-den as the For details on Function lock nP. 134 substitute image, press [Chara-den set]/[Action list]. Alternatively, press m or p (for 1+ seconds) to display the action list. Chara-den Select an action/t. Chara-den nP. 330 To end the action: Press 0.
Page 83
Operations while sending your own image Related Operations To display Submenu: Press <. Zoom in and zoom out • Operation panel also appears. Touch it While sending a camera image, press r/q. to operate the submenu. Press v to adjust the zoom. •...
Page 84
Changing an image when making a call Prefer img qual To place an emphasis on shape and color <V.phone image> Normal To create a balance of clarity and movement The Videophone image is only enabled for one time. Prefer motion spd To place an emphasis on movement In stand-by, enter a phone number/C.
During a Videophone call, press If the sound breaks up during a Hands-free call, lower the Earpiece volume. [Videophone]/[Display setting]/[Subscreen disp]. In the Custom menu: Select [Settings]/[Phone settings]/ [Videophone set]/[Display setting]/[Subscreen position]. Setting the image during Select the display method/t. Videophone calls Related Operations Change the image displayed during Videophone calls.
Note Voice mail Automatically connects to Voice Mail Service. If a call is redialed as a voice call, the voice call charges are incurred. Call forwarding Automatically connects to Call Forwarding Service. Note that Redial voice call may not work if a call is placed to an ISDN synchronous 64K access point or an ISDN Videophone that Videophone calls, during PushTalk transmissions, Software does not support the 3G-324M standard (nP.
Page 87
PushTalk What is PushTalk?........86 Sending PushTalk transmissions .
(transmission is sent). 4Status of members Refer to the DoCoMo website or “Mobile Phone User’s Guide Transmission status of each member appears. When a status [Network Services]” for details and compatible models of PushTalk.
An error tone sounds if < (q) is pressed while another person is speaking. Sending PushTalk transmissions Release < (q) when finished speaking. A right-released tone sounds. Press the PushTalk key to communicate easily using packet Press H to end the transmissions. transmissions.
Press C during PushTalk transmission/[Add During PushTalk transmission, i-mode mail and Message R/F are member]. held at the i-mode center. However, SMS are received automatically even during PushTalk transmission. Alternatively, press m during PushTalk transmission to add a member. Related Operations Select the adding method and send a transmission.
PushTalk calls received during a voice/Videophone call or data communication are not connected. During a voice call, the call is Receiving PushTalk transmissions recorded in Received calls, and the stock icon B (missed call) appears. During a Videophone call or data communication, the call When PushTalk is received, the ring tone sounds is not recorded.
■ PushTalk phonebook Add to PushTalk PB Select a group from the PushTalk group list or select members from Adding to the PushTalk phonebook the PushTalk member list to send a transmission to the members saved in the PushTalk phonebook. Entries saved to the PushTalk phonebook are also saved to the FOMA terminal handset phonebook.
Page 93
■ Adding to the PushTalk group from the PushTalk Registering to the PushTalk group member list screen <Add PushTalk group> Set groups in the PushTalk phonebook to easily call all members of a Save PushTalk phonebook entries that are already saved as PushTalk PushTalk group.
• E appears for selected entries, and H appears for ■ Editing PushTalk phonebook entries <Edit data> unselected entries. Change phone numbers and groups of saved PushTalk phonebook • When nothing is checked, only the party at the position of the entries.
Note (Related operations) Set auto answer Deleting PushTalk phonebook entries When a call is received with Auto answer, the call is automatically switched to hands-free. Auto answer is not In the PushTalk member list screen, select a available while in the Manner mode. name/C/[Delete].
Page 96
Set PushTalk Selecting actions for incoming calls during a Setting PushTalk send/receive options transmission <Set PT arrival act> Set the following response methods. Set the following items. Voice Mail Automatically connect to Voice Mail Service Item Setting details Page Call Forwarding Automatically connect to Call Forwarding Service Ring time setting Set the duration to sound the PushTalk P.
Page 97
Phonebook Phonebooks available on the FOMA terminal ....96 Adding to the phonebook ....<Add to phonebook/FOMA card phonebook>97 Setting groups .
Page 98
Entry status Phonebooks available on the FOMA FOMA Icon Item Details FOMA terminal card terminal handset Save phone numbers. In Use FOMA terminal handset phonebook and FOMA card the FOMA terminal Phone phonebook. Save items such as names, phone numbers and handset phonebook, select Three number...
Page 99
Note Entry status FOMA When upgrading the handset at a DoCoMo Shop or retailer, data Icon Item Details FOMA terminal saved in the FOMA terminal may not be copied depending on card handset specifications of the new model. Enter secret code...
Page 100
■ Entering/Selecting items Save mail address and mail address type Select S/enter a mail address/t/select a mail address An entry can be saved by only entering a name. After entering a name, type icon/t. freely select other items to save. Edit items after saving. For the FOMA card phonebook: Select T/enter a mail Enter name address/t.
Page 101
Set called LED pattern and mail LED pattern Select -/select an LED pattern/t. Save entire mail address to set Mail ring tone/Called LED. If mail For Mail LED pattern: Select +. address is phone number@docomo.ne.jp, set only phone number. Set Picture call Select 8/select an item.
When copying from the FOMA card to the FOMA terminal terminal handset or transferred from a PC or another FOMA handset terminal using Ir exchange, iC transmission or DoCoMo keitai Reading is saved as single-byte characters. datalink, are not available.
In the FOMA card phonebook, enter up to 10 characters (21 ■ Phonebook when the 2in1 is used single-byte characters for single-byte alphanumerics). For details on available phonebook depending on the 2in1 mode To restore the default group name: In the edit screen, press c nP.
Page 104
Making calls from searched numbers Related Operations Search by a part of phone number <Search phone no.> In stand-by, press a. In stand-by, press a/C/[Search phone no.]/enter a Phonebook appears sorted by the previously selected search part of phone number/t. method.
Page 105
Showing images set in Picture call Viewing the microSD Card phonebook <Switch view mode> <View microSD data> Show images set in Picture call for entries in the phonebook entry details screen. In stand-by, press a/C/[View microSD data]. In the details screen, press C/[Switch view mode].
Switch the order of saved multiple phone numbers or Edit entries mail addresses <Switch item> Editing phonebook entries In the phonebook list screen, select a name/C/ [Edit data]/[Switch item]. Edit items saved/set in phonebook entries. In the entry details screen: Press C/[Edit data]/[Switch item]. In stand-by, press a/select a name/C/[Edit Select a switch item/t/select a source/t/...
Page 107
In the Custom menu, select [LifeKit]/[Data Sec. 2-touch dialing/2-touch mail Service]/[Connect to Center]/[Yes]. Calling and sending mail with a few In the phonebook list screen: Press C/[Connect to Center]/ key strokes [Yes]. Enter the terminal security code/t. Easily call or send i-mode mail to parties saved in memory numbers [000] to [099] in FOMA terminal handset Note phonebook.
Page 108
Viewing the phonebook transmission history <Exchanging history> Check up to 30 transmission history entries of saving/updating the phonebook, mail and images, starting with the newest. When the transmission history exceeded 30 entries, entries are deleted starting with the oldest. In the Custom menu, select [LifeKit]/[Data Sec. Service]/[Exchanging history]/select a history/t.
Sound/Screen/Light Settings Sound settings Screen/Light settings Changing mobile phone sounds ... . <Sound settings>108 Changing stand-by display settings......114 Changing the mobile phone sound volume.
Page 110
Select an item/t. Sound settings Changing mobile phone sounds Select a ring tone/i. To check the ring tone: Select the ring tone/t. ■ Preset ring tones When setting Chaku-uta full ® , set a full song (Full song ring tone) or a part of a song (Point ring tone). Song title Song title data...
Page 111
Select a sound/t. When a call is received during data transmission, the ring tone and To check the sound: Select the sound/i. the Receive display are the same as the settings for voice calls. A voice only i-motion can be set as a PushTalk tone. ■...
Page 112
Note Snd playbck (melody) Setting the 3D sound and sound quality The ring volume for a call received during data transmission follows the volume set for Phone ring tone. Set stereo effects and equalizer used when playing melodies. Adjusting the earpiece volume <Earpiece volume>...
Page 113
Note Setting the equalizer <Equalizer> Note that if the vibrator is set and the FOMA terminal is left on a Set the equalizer according to music genres. table, it may fall due to vibration. In the Custom menu, select [Settings]/[Snd/ Melody Call setting Vibrator/Manner]/[Snd playbck (melody)]/...
Page 114
Note Quality alarm Sounding an alarm when the signal In the following cases, the mail ring tone does not sound even if mail is received. is weak Calls are in progress i-appli is running Camera is being activated Quality alarm is available only for voice calls. GPS positioning is being performed 1Seg is being watched (excluding when using Multi Window) In the Custom menu, select [Settings]/[Phone...
When no settings are selected, the Manner mode selected A pop may sound when the power is turned on or the handset is previously (the Normal manner mode is set for the first time) is operated. This is not a malfunction. set.
Page 116
Note Original Changing the Original manner mode Voice only i-motion, i-motion with playback restrictions and i-motion in the ASF format cannot be set as stand-by. In the Custom menu, select [Settings]/[Snd/ Images saved on the microSD Card cannot be set. Copy/Transfer them to the FOMA terminal handset before setting.
Page 117
Select the [Set clock style] field/t/select an Displaying the calendar <Calendar display> image/i. Display the calendar on the stand-by display. To check the image: Select the image/t. Japanese national holidays as stipulated in the revised National Select the [Set disp position] field/t/select the Holiday Law and Welfare Law for the Elderly (Law No.
Page 118
Select an image/i. Desktop clock To check the image: Select the image/t. Showing the Desktop clock while charging Note i-motion (excluding voice only i-motion) can also be set to the While stand-by is shown in the viewer position, start receive display and mail received screen. charging to show the Desktop clock.
Page 119
Note Setting the Eco mode (Power saver) by one-touch Images are prioritized in the following order. operation Priority (high b low) In stand-by, press s (for 1+ seconds)/[Yes]. Image Phonebook Picture call b group Picture call b Call/ Press s for 1+ seconds again to show the Light/Power saver Receive display screen and change the settings.
Page 120
Select an item/t. The display is not turned off even when the Screen display time passes in the following cases. Select the setting/t. Videophone calls are in progress To change the setting in [Normal]: Enter the light duration/t. i-mode transmission is in progress Mail is being sent/received Camera is being activated Note...
Page 121
Select Kisekae Tool/i/[Yes]. Setting the keypad backlight <Keypad light setting> To check data: Select Kisekae Tool/t (to show data list Set whether to turn on or off the keypad backlight. screen)/select data/t. In the Custom menu, select [Settings]/[Disp/LED/ In the confirmation screen for the collective setting of the font size, select [Yes] to change to the font size specified for Kisekae Tool.
Page 122
Changing the menu items Resetting Kisekae Tool settings Depending on the Kisekae Tool, change the items in the Custom ■ Resetting all setting items of display/ring tone menu to other functions (Manual customization). <Reset display/sound> The preset [White], [Black], [Pink], [Blue] and [拡大メニュー When the display/sound settings are reset, Kisekae Tool [White] is (Large)] support the manual customization.
Page 123
Note Changing the animation for the Notice window Machi-chara is not available if GIF image, animated GIF, Flash <Animate notices> movie, i-motion, or i-appli is set for the stand-by display. Change images for windows with confirmation/error messages. Depending on the action, some parts of Machi-chara may not be In the Custom menu, select [Settings]/[Disp/LED/ displayed.
Note (Related operations) Changing the Basic menu design When characters are included in the icon image, the characters appear doubled when Display icon name is set to [ON]. Change icons, background image and whether to show icon names in the Basic menu. Setting the Basic menu background If an image in My picture of Data box is set as a menu icon, even if <Set background>...
Page 125
Select [LED pattern settings]/select the LED LED color settings/LED pattern settings pattern/t. Setting the illumination Select a pattern with u to check the LED flashing pattern. Set the flashed LED color, the flashing pattern, and whether Note to flash, in a call, when receiving a call, when using GPS function, etc.
Display img quality Automatically controlling the brightness of Changing the image quality backlight while playing a movie <Control by scene> In the Custom menu, select [Settings]/[Disp/LED/ Setting the image quality mode <Vibrant image mode> Power saver]/[Display img quality]/[Control by Set the display quality by functions which show images. scene].
Page 127
Example: When setting the Text input individually Related Operations Set Font size collectively with one-touch operation In stand-by, press 5 (for 1+ seconds). Maximum Large Note (Related operations) Font size is switched from [Large] b [Largest] b [Normal]. Normal Small VeilView Preventing others from seeing the In the Custom menu, select [Settings]/[Disp/LED/...
Page 128
Disabling the VeilView temporarily in the stand-by <Dis temp in stdby> Set the VeilView to be temporary disabled automatically when the stand-by reappears. In the Custom menu, select [Settings]/[Disp/LED/ Power saver]/[VeilView]/[Dis temp in stdby]. Select the setting/t. Setting the pattern of VeilView <Pattern>...
Security Settings Security codes Restricting mail and calls FOMA terminal security code ......128 Setting the display of Redials/Received calls and Mail history Changing the terminal security code.
Page 130
Keep security codes private. If the security codes are found and e-site). improperly used by others, DoCoMo shall not be liable for any loss ※ Refer to the inside back cover of this manual for details on “My of the users.
Page 131
PUK is an eight-digit number used to disable the PIN1/PIN2 code lock. Contact a DoCoMo Shop Set a new PIN code PUK cannot be changed by the user. If PUK is incorrectly entered a total of ten times continuously, the Change security code FOMA card is completely locked.
Page 132
Handwrite characters and symbols to be used for the Writing authentication is not completely accurate. DoCoMo shall not authentication on the text input part. be liable for damages stemming from a third person using this Handwrite a character or symbol with 2 to 12 strokes.
If the authentication is not successful, [Unable to authenticate. Changing the PIN1/PIN2 code Register symbol again if error continues] appears. <Change PIN1 code/PIN2 code> • To authenticate again: Select [Re-authenticate]/operate step 1 again. When the PIN1 code input set is set to [OFF], the PIN1 code cannot •...
Page 134
All lock Lock functions Preventing the use by others Restrict phonebook operations such as retrieving, saving Prevent all operations other than power ON/OFF and and deleting, and calling with the dial keys. answering voice/Videophone calls. Lock function Operation/Restrictions Page Enabling All lock All lock Prevents the unauthorized use of the FOMA terminal for all operations other than power...
Page 135
FOMA card inserted remotely, for example, in case of loss, Turning the power ON/OFF does not affect Omakase Lock (the lock by your request. Contact DoCoMo or access My DoCoMo website to is not released by turning the power OFF).
Page 136
Message indicating the handset is turned off or in a place with no Linked with the Function lock that is set from each function menu. signal is played to calls received. DoCoMo Voice Mail Service and Ir exchange, iC transmission and Bluetooth communication for Call Forwarding Service are available.
Page 137
i-Channel ticker does not appear. Mail-type i-appli cannot be downloaded. [i-mode Search], [Search from iMenu] and [Search by full browser] When Function lock is applied to the Phonebook of Quick search are not available. The phonebook and the PushTalk phonebook are not available. When Function lock is applied to i-appli The information saved in the phonebook (name , memory number,...
Page 138
Keypad dial lock Multi easy lock Prohibiting keypad dialing Setting various lock by one-touch operation Prevent calling (including PushTalk) to numbers other than saved in the phonebook (excluding the microSD Card Keypad dial lock, Function lock and IC card lock can be set phonebook) and the PushTalk phonebook (including the at once.
Page 139
Setting Multi easy lock automatically Show call/received, Show sent/received Setting the display of Redials/ <Multi lock auto-set> Received calls and Mail history Multi easy lock can be automatically set when the Power saver mode is activated in stand-by or when the FOMA terminal is closed. Histories are recorded even when Show call/received or Show sent/ In the Custom menu, select [Settings]/...
Page 140
Secret mode Accept calls/Reject calls Viewing information set as secret Receiving/Rejecting calls from only specified phone numbers If the Secret mode is set, normal and secret data appear when the phonebook and Schedule are displayed. Accept/Reject calls from only specified callers. To set Only normal data is shown when the Secret mode is disabled.
When the other party has two or more phone numbers, saving is Check the registered other party’s phone number required for each number. In the save list screen, select a name/C. Note If an entry saved in Accept/Reject calls is edited/deleted in the Reject calls by reason of non-disclosure phonebook, the saved list content is also edited/deleted.
Page 142
Set mute ring time Reject unknown Silencing the ring tone for callers Rejecting callers not in the not in the phonebook phonebook Set a ring tone to sound after a set number of seconds when Set the handset to reject calls (including PushTalk) from receiving a call (including PushTalk) from the caller not in callers not in the phonebook (excluding the network the phonebook (excluding the network phonebook).
Page 143
FOMA terminal data such as phonebook, images or mails at the To prevent others from using IC card lock DoCoMo data storage center and the saved data at the Center can be P. 263 IC card functions restored in the event of data loss due to the loss of the FOMA terminal To reject “nuisance calls”...
Page 144
Function/ Intent Ref. Service name To receive/reject only mail Spam Mail from specified domains Prevention (Reject/Receive To receive/reject mail from i-mode Mail Settings) To receive/reject only mail from specified addresses To set the recommended Spam Mail setting for Spam Mail Prevention Prevention easily (Mail Settings)
Page 145
Camera Before using the camera ....... . 144 Shooting still pictures..... . <Shoot still pic>153 Shooting movies .
When the AF mode is switched, sounds may be heard from the camera lens. This is not a malfunction. Before using the camera Shutter sound, shooting start/end sound, completion sound, Focus lock sound, and auto timer sound Using the camera For still pictures shooting, movies shooting, Shotdeco or Cameraloupe, sounds are enabled regardless of the FOMA Fingerprints or oil on the lens may cause the image to be out of...
Page 147
■ Shooting other people and landscape Approximate number of recordable images Normal position Viewer position This lists the approximate number of shot images and recording times that can be saved in the FOMA terminal handset or 64 MB microSD Card. The number of images that can be shot or recordable image lengths are fewer or less when other images, i-appli software or other types of files are saved in the FOMA terminal handset or 64 MB microSD Card.
Page 148
Total recording time of FOMA terminal handset ECONOMY NORMAL SUPER FINE 3M: 1536×2048 140 shots 90 shots 45 shots SUPER ECONOMY NORMAL FINE 5M: 1920×2560 140 shots 70 shots 35 shots FINE Panorama: 1280×320 – – 180 shots Image + voice 258 min 175 min 86 min –...
Page 149
Continuous recording time per shot of 64 MB microSD Card SUPER ECONOMY NORMAL FINE FINE SUPER ECONOMY NORMAL FINE Image + voice – – – 10 sec FINE mail Image only – – – 10 sec Image + voice 155 sec 105 sec 52 sec –...
Page 150
■ Icons that appear in the lower part of the display SUPER ECONOMY NORMAL FINE FINE Still picture shooting screen Image + voice – – – 19 min mail Image only – – – 19 min (short) Voice only 611 min Image + voice –...
Page 151
2AF mode indicator Bar code reader screen Standard Closeup Def (people first) (only for Manual focus (only for still still pictures) pictures/movies) 3Picture light indicator Card reader screen 4Image brightness indicator Dark c Normal b Bright 5Auto timer indicator 2 seconds 5 seconds 10 seconds 6Shoot by scene indicator...
Page 152
8Effect indicator cWhite balance indicator Black & white Spectrum (only for movies) Auto Fluorescent Cloudy Sepia Ripple Incandescent Sunlight Sparkling Kaleidoscope (L) dCommon replay mode indicator Colored pencil Kaleidoscope (S) Common replay mode [ON] Faded edges (only for still eFile size limit indicator Fish-eye pictures) For mail (short) (500 KB)
Page 153
Activating/Deactivating the camera ■ In the viewer position In stand-by, press <. The picture light illuminates and the still picture shooting screen appears. The image from the camera is shown on the display. To end: In the still picture shooting screen, touch the touch panel/touch ■...
Page 154
Still picture/ Character Bar code Card Related Operations Movie Shotdeco Cameraloupe reader reader reader View key list <Key list> # Picture light – – – – In the still picture/movie shooting screen, press s Focus lock [Key list]. 1 Switch camera-mode Folder list Folder list Select...
Page 155
• The present location is positioned by GPS function Shoot still pic (nP. 266). Shooting still pictures To edit and use a still picture: Press C. • Edit image (nP. 320 to P. 323), Facial treatment When a still picture is shot, the shutter sounds and the picture light (nP.
■ Fast, Standard and Manual Changing the image size or setting Effect shot cancels the In the Fast continuous mode, automatically shoot still pictures at Continuous mode. approximately 0.1 second intervals and at approximately 0.2 second If an incoming call is received or the alarm is activated in the intervals in Standard continuous mode.
Page 157
For the moving speed of the FOMA terminal, make sure that q While a panoramic picture is shot, if no operations are made for appears as the moving speed indicator on the lower left of the screen. approximately 2 minutes, the Camera mode automatically ends When shooting is almost completed, t appears.
Page 158
Make sure not to press keys while shooting a movie as keypad Shooting in the normal position sounds may be recorded. Activate the movie mode. Use the zoom (nP. 156) or show Shooting settings screen Changing settings for shooting (nP. 161). To shoot a movie of yourself: Rotate the display/make the camera face you.
Page 159
Still picture mode Using the picture light <Picture light> Current zoom position Maximum magnification ratio In the still picture/movie shooting screen, press C/[Shooting menu]/[Picture light]/[ON]. Instant zoom mark For Character reader and Bar code reader, press i. Movie mode Current zoom position Maximum magnification ratio Note Picture light is a supplementary light source for surroundings with low...
Page 160
The Auto timer is not deactivated after shooting or canceling. Setting the File size limit <File size limit> Note Set the File size limit before shooting movies. When a call is received or an alarm is activated, the Auto timer is When sending with i-motion mail, select [For mail (short)] or [For canceled and the shooting screen reappears.
Page 161
Select [Spot AF]/select the focus area with w. If the image size differs from the frame size, the frame is rotated 90°. Select [Closeup]. Use frames downloaded from sites to shoot with frames. Select [Manual focus]/adjust the focus with v/t. In the still picture shooting screen, press •...
Page 162
In the still picture/movie shooting screen, press If the following action is performed while [Processing] appears C/[Shooting menu]/[Effect shot]/select the after the shot with Fix camera shake, the still pictures being shot are discarded. type of effect/t. When an incoming call is received or the alarm is activated (the Press t/<.
Page 163
Disabling the Focus lock Note When focus is locked with s: Press s. If White balance is set to a setting other than [Auto], Shoot by When focus is locked with <: Release <. scene is automatically set to [Auto]. Change the composition and shoot.
Page 164
1AF mode 8Shoot by scene 2Fix camera shake 9Shoot with frame Changing the camera settings 3Continuous mode aWhite balance To change the shutter sound nP. 109 4Image quality bPicture light 5Select size cSwitch phone#SD Showing images in Full-screen <Full-screen mode> 6Brightness dSwitch img/voice All icons can be deleted to view a still picture at full screen.
Page 165
When the number of still pictures or movies saved in the folder Preventing the still picture/movie shooting exceeds 400, a new folder is automatically created, and still settings from being retained to return to the pictures or movies are saved in the new folder. The microSD Card default settings <Save camera set>...
Page 166
Activate the Bar code reader mode. Bar code reader In the Custom menu: Select [LifeKit]/[Bar code reader]. Using the Bar code reader Display bar code (JAN/QR code) to be read in the Use the camera to scan bar center of the screen/t. codes (JAN/QR codes) for Phone To (AV Phone To), Mail To, Web To, register bookmark, add to...
Page 167
■ Using the saved data Related Operations In the scanning screen, press C/[Saved data]/ Activate the Bar code reader in the URL entry screen or select the saved data/t. text input screen for a site In the text input screen, press C/[Quote]/[Bar code Character Reader (OCR) reader].
Page 168
To search for scanned text in dictionary: Press C/[Search Activate the Character reader mode. dictionary]/[Yes]/select a dictionary/t/search in dictionary. In the Custom menu: Select [LifeKit]/ • For details on searching for dictionary nP. 362 [Character reader]. To edit scanned text: Press C/[Edit]. To select the data type for scanning: Press To copy all scanned text: Press C/[Copy all].
Page 169
In the scan results screen, press C. For scanning, the direction of the business card can be either vertical or horizontal on the screen. Keep it vertical or horizontal Add scanned results. when scanning. Select [Add to phonebook]/add to the phonebook. Alternatively, scan in the viewer position.
Page 170
Display an image or a character to be scanned in The reading (pronunciation in kana) may not be saved correctly or the center of the screen/t/<. added automatically. Items may not be recognized properly. The shutter sounds and the picture light flashes once. Press t/<.
Page 171
i-mode/i-motion/i-Channel i-mode Useful i-mode functions What is i-mode? ........170 Using highlighted data .
What is i-mode? Viewing sites i-mode is an online service that connects i-mode compatible Use the various services provided by IPs (Information FOMA terminals (i-mode terminals) to sites (programs) and Providers). Use the FOMA terminal for functions such as the Internet, and enables i-mode mail exchange. bank balance inquiries or ticket reservations.
While viewing sites, press C/[iMenu]. below is used to view SSL pages. Apply Function lock to i-mode <Function lock> CA certificate DoCoMo certificate Client certificate In stand-by, press i/[i-mode setting]/[Function To end the SSL session: Press i. lock]/enter the terminal security code/t/[ON].
Connecting to the last viewed page Setting the sound effects volume <Last URL> <Sound effect> When i-mode is disconnected, the last viewed page is recorded as Set the sound effects volume from sites, Flash movies and screen Last URL. memos. In stand-by, press i/[Last URL]/t.
Page 175
■ Selecting items and inputting text in sites, etc. Selecting links and items Use the following methods to select items and input text in sites, etc. Links appear blue normally. A selected link is highlighted. Name Display example Details Some links may be images. When selected, the image is outlined. 4: Unselected Radio Select only one entry.
Page 176
Press q repeatedly to return through previous pages. When using Moving to previous/next page (cache, history) q to return through previous pages (C to B) and another page (D) is viewed, pressing q twice at D will not return to C. Page will be The FOMA terminal stores up to 50 pages of sites and how they have been viewed.
Create image mail from sites <New mail w/image> マイメニュー (My Menu) While viewing sites, press C/[Compose Registering to マイメニュー (My Menu) message]/[New mail w/image]/select an image/ Register frequently visited sites to マイメニュー (My Menu) Select the attaching method. for convenient access. Select [Insert URL]/compose and send a mail.
In the case of a forgotten password, bring identification (a driver’s private when using and managing them. If the ID or password is license, etc.) to a DoCoMo Shop. Password is reset to [0000]. found and improperly used by others, DoCoMo shall not be liable for any loss of the users.
Page 179
Using the registered login information Related Operations View with Full Browser <Paste login info> <Switch to FB> While viewing sites, press C/[Switch to FB]/[Yes]. Paste the login information collectively in the text box. The login Scan a URL with the Bar code reader information cannot be pasted in some sites.
Note Related Operations Up to 24 single-byte (12 double-byte) characters from the Delete the URL history beginning of a title are saved. If the title exceeds 24 single-byte Select a URL history/C. (12 double-byte) characters, the extra characters are deleted. Select the deletion method.
Delete bookmarks Related Operations <Delete> Select a bookmark/C/[Delete]. Attach a bookmark to i-mode mail <Attach to mail> Select the deletion method. Select a bookmark/C/[Attach to mail]/compose and Select [Delete one]. send a mail. Select [Delete selected]/select the bookmark t Create user folders <New folder>...
Page 182
Create mail with image from the screen memo Viewing screen memos <New mail w/image> In stand-by, press i/[Screen In the screen memo display screen, press C/[Compose Memo]. message]/[New mail w/image]/select an image/t. Select the attaching method. Meaning of icons Select [Insert URL]/compose and send a mail. Screen memo list Standard screen memo Select [Attach image]/[Agree]/compose and send a...
Note (Related operations) Downloading images Deleting Save images, frames and stamps downloaded from sites, etc. Set saved By [Delete all], protected entries are not deleted. images as stand-by and for other functions. Also, download Deco-mail or Decome-Anime Templates to use when composing messages. While viewing sites, press C/[Save/Add]/[Save image].
Page 184
Note Downloading i-melody When PDF files that are larger than 500 KB are downloaded, a While viewing sites, select a melody/t. confirmation screen appears. Select [Save]/select a save destination/t. PDF files with unknown file size cannot be downloaded. To play back melodies: Select [Play]. PDF files downloaded by an individual page cannot be saved to a microSD Card.
Downloading download dictionaries Downloading e-comic/e-dictionary/e-book While viewing sites, select a download While viewing sites, select e-comic and others/ t/[Yes]. dictionary/t. Select [Save]. Select [Yes]/select a save destination/t. To check the dictionary: Select [Show]. Note Select a slot/t. The types (file extensions) of available e-comic and others are To overwrite: Select [Yes].
Note Using highlighted data Mail To may not be available if two or more mail addresses appear together. Use highlighted data (phone numbers, mail addresses, Up to 50 single-byte character mail addresses are valid. Portions URLs, etc.) in sites, mail or ToruCa and conveniently make a of addresses exceeding 50 characters are deleted after the 50th voice/Videophone call, send mail, or access an Internet web character.
Start 1Seg from the link of program information or set a timer for Pake-hodai/Pake-hodai full does not apply to packet transmissions starting or recording a program. incurred for hosts other than DoCoMo. Select the link of program information/t. ■ Provider agreements...
Page 188
■ Saving hosts Related Operations In stand-by, press i/[i-mode setting]/[Host Reset saved contents <Reset> selection]. In sand-by, press i/[i-mode setting]/[Host selection]/select a host number/t/[Reset]/enter Select a number to register/t/[Edit]. the terminal security code/t. Enter the terminal security code/t. Note (Related operations) Enter the host name/t.
FOMA terminal by default. Resetting i-mode settings <Reset i-mode> DoCoMo certificate…Certificate registered in the FOMA card (green/white) required to connect to the FirstPass center or The following i-mode settings are reset to the default settings. FirstPass compatible sites.
Page 190
If the FOMA card is lost or stolen, contact “General Inquiries” on the back of this manual and cancel the Client certificate. DoCoMo shall not be liable for sites or information provided by FirstPass compatible sites. All problems must be resolved between user and site.
Page 191
Note Note Read [The usage regulation (Japanese only)] carefully before Always apply for a Client certificate when renewing or attempting using FirstPass. to get a new certificate. A certificate cannot be downloaded without application. Packet charges are not incurred for accessing to the FirstPass center.
■ Changing the Certificate issuer <DoCoMo CA Host> Playback Type Explanation Set a host when downloading a Client certificate. method The setting does not normally need to be changed. Streaming type Played during Simultaneous playback while In stand-by, press i/[i-mode setting]/[Secure download (up to downloading data.
Download i-motion Saving i-motion Downloading i-motion from sites Save up to 100 i-motion on the FOMA terminal handset. The number of i-motion that can be saved varies depending on the size of i-motion. Playing i-motion downloaded from sites i-motion is saved to the [i-mode] folder in i-motion of Data box. i-motion, which can be saved in the microSD Card, can be saved in While viewing sites, select i-motion/t.
Select a channel/t. i-mode subscription is also required). i-Channel has a “ベーシックチャネル (Basic channel)” Note provided by DoCoMo and “おこのみチャネル (Favorite channel)” provided by non-DoCoMo IP (Information Receiving the latest information Providers). Packet transmission charges for automatically Information may not be received when the handset is turned off or signal is weak, such as when outside the service area.
Note Related Operations When i-Channel ticker is set at the same time with Calendar Adjust the sound effects volume <Sound effect> display or Stand-by memo display, i-Channel ticker does not In the channel list, press C/[Display/set]/[Sound appear while displaying Calendar. Press H in the stand-by effect]/adjust the volume u/t.
Page 197
Mail Operating the mailbox What is i-mode mail? ........196 Displaying Mail menu .
Page 198
Menu Function Page What is i-mode mail? Receive option Select mail to receive from i-mode center. P. 206 WEB Mail Access the WEB mail site, and compose – Subscribe to i-mode service to exchange mail with other and send mail from Address B. i-mode terminals and e-mail via the Internet.
Page 199
Secret code is added and sent. To insert a phrase: In the message entry screen, press When sending mail to a non-DoCoMo address for which a Secret [Insert phrase]/select the phrase/t/t. code has been set, error messages such as for unknown To add a signature: In the compose message screen/message recipients are sometimes not received.
Page 200
Broadcast Active decorations Font color/Font size/Word alignment Send an identical i-mode message to up to five people simultaneously. To : Receiver’s address. Addresses entered in [To] appear on the Swing other recipient’s screen. Insert image Cc : Used to send carbon copy to a third party. Background Bcc : Used to send blind carbon copy to a third party.
Page 201
Decoration Decoration Decoration content Decoration method Decoration content Decoration method name name Font size Change the font size. Select the font size/ Reset Enter undecorated t/input text The size of Deco-mail decoration characters. pictographs cannot be All the decorations that –...
Page 202
Inserting images Compose Decome-Anime If the same image is continuously inserted, 20 or more can be Composing and sending Decome-Anime inserted. However, images are not deemed identical in the following cases. What is Decome-Anime? When an image is inserted/pasted after a message with the image is saved Decome-Anime is an expressive mail service that uses When an image included in a signature is inserted into a...
Page 203
Select the edit item/t/edit. The following operations cannot be performed on composing Select [Input]/input text/t. Decome-Anime. Inserting Deco-mail pictograph Changing font size Select [Font color]/select the font color/t. Changing the position inserted text or images Select [Select image]/select the image/i. Changing font Pasting signature Select [Delete]/[Yes].
Page 204
In the compose message screen or message entry screen: Note (Related operations) Press C/[Open template]. Images are saved in a selected save destination in My picture of Select a template/i. Data box. Deco-mail pictographs are saved in the [Decomail pict] folder in My picture of Data box. To check the template: Select the template/t.
Page 205
Select [Phonebook]/select a save destination/t/ File attachment select a name/t. Attaching a file Select [Schedule]/select a save destination/t/(select /select a schedule/t. a day/i) Send i-mode mail attached still pictures, movies/i-motion, etc. * No operation is needed if [microSD] is selected as the save Attach up to ten files in a total size of up to 2 MB.
Page 206
Related Operations Related Operations Add attachment file Check the error information of auto send <Auto send error> Select mail with send reservation and press C/[In-area Select the attachment field/t/[Attach]/proceed to step 2 of “Attaching a file”. auto send]/[Auto send error]. Release attached file Cancel send reservation <Cancel send res>...
Page 207
i-mode mail or Message R/F is held at the i-mode center when one Auto receive of the following occurs. Receiving i-mode mail Handset is turned off While in the Self mode Outside the service area Using Videophone The following icons appear when mail is received. During PushTalk transmission Meaning of icons While Omakase Lock is set...
Page 208
To view the Inbox list screen: Press m (for 1+ seconds). Mail ring tone does not sound if mail is received while a call is in • In the viewer position: Press < (for 1+ seconds) or touch the progress, i-appli is running, the camera is being activated, GPS mail ticker.
Page 209
Select [受信/削除]/[決定]. Note To re-select mail: Select [キャンセル]. [Re:] is entered at the beginning of received mail Subject. [>] is inserted at the beginning of message and received mail Related Operations content is quoted for a reply with quote. Selectively receive mail from i-mode <Receive option>...
Page 210
In the received message details screen, select the When Decome-Anime is forwarded, editing Decome-Anime is not name of the attached file/t. available. Also, the confirmation screen stating that message cannot be forwarded may appear. Note Register address/Add to phonebook When there are attached files for manual reception that has not Adding mail addresses and phone been acquired, an expiration date is displayed at the bottom.
Compliant software is necessary for i-motion playback on PC or If set to the viewer position, the Full-screen mode (W) appears. other devices. Refer to DoCoMo website for details. ■ Key operation during message details screen display When files that are not recognizable by the terminal are saved to...
Page 212
3Message R/F folder When the Use phone information of i-mode is set to [No], the Folder icons appear pink when an unread message is saved. display may be different in the Decome-Anime playback screen, the compose Decome-Anime screen and the message details screen. Message R is saved.
Page 213
1Received message type 2Sent message type In [Inbox], i-mode mail and SMS on the FOMA terminal handset and In [Outbox], i-mode mail and SMS on the FOMA terminal handset on the FOMA card are shown together. and on the FOMA card are shown together. Unread i-mode mail Sent i-mode mail Unread i-mode mail...
Page 214
6Attachment type icon Details screen layout Bookmark JPEG image/GIF image/ Received messages details Sent messages details animated GIF/Flash movie Word file Melody Excel file < i-appli To information PowerPoint file > Movie/i-motion Text file ToruCa, ToruCa (details) BMP file PDF data PNG file Phonebook Data unable to view...
8Subject 9Message Managing mail [- END -] appears at the end of the message. When receiving limit is exceeded, [/] or [//] appears and the exceeding portion is automatically deleted. Managing folders aAttachment type icon/File name ■ Creating user folders <New folder>...
Page 216
■ Setting the folder security <Folder security> Managing mail When Folder security is set, the folder icon changes to =. Enter the ■ Displaying a message in the message list terminal security code to view the message list. <Preview> In the message list screen, press C/[Display Select a folder/C/[Manage folders]/[Folder security].
Page 217
■ Moving mail to another folder <Move> Note Select mail/C/[Move/Copy]/[Move]. Area Mail cannot be protected. Select up to 50 mail messages for Protect selected/Clear selected. Select the transfer method. SMS on the FOMA card cannot be protected. Copying a protected Select [Move one].
Page 218
Saving messages to the data storage center Received/Sent messages history Using mail history <Store in Center> Save i-mode mail and SMS saved on the FOMA terminal. Use a history of received/sent mail to send mail or save the This service is a paid service that requires subscription (i-mode other party’s mail address or phone number to the phonebook.
Page 219
4Other party’s name ■ Making calls from a history <Phone> Appears when already saved in the phonebook. Make a call to another person whose phone number is saved in the 5Mode type of 2in1 phonebook. Appears when set to [Dual mode]. Select a history/C/[Phone].
Page 220
Sort rules for multiple folders coincide. Secret phonebook entries are treated as unsaved entries. ■ Deleting specified Sort rules @docomo.ne.jp can be abbreviated when sender is using an Select a folder/C/[Sort rules]. i-mode terminal (including mova). SMS can be sorted by specifying phone number.
Page 221
Adding a signature to i-mode mail Saving mail member <Save signature> <Mail member> Only one signature can be saved. Unlike Broadcast mail, multiple mail members can be specified Enter up to 10,000 single-byte (5,000 double-byte) characters. collectively. Insert up to 90 KB of images. [K] (line breaks) are available. Save up to ten mail members.
Page 222
Note Setting whether to automatically replay melody For Message R/F, all attached files are received regardless of <Melody Auto replay> settings. Set whether to automatically play melodies attached to mail when Melodies in MFi format pasted in the message text are received opened.
Page 223
The following icon appears when Message R/F has been received. Resetting mail settings <Reset mail settings> Meaning of icons Reset mail settings to default settings. In stand-by, press m/[Mail setting]/[Reset mail Unread Message R/F (green) settings]. Received Message R/F is full in the FOMA terminal Enter the terminal security code/t/[Yes].
Page 224
In stand-by, press m/[Mail setting]/[Auto Opening new Message R/F message display]. When Message R/F is received, the newest one appears Select the display method/t. automatically. The received Message R/F does not appear when Auto message display is set to [No auto display]. Note Receive Message R/F automatically (A/B flashes).
Page 225
3Attached data Adding phone numbers and mail addresses from ToruCa Message R/F to phonebook <Add to phonebook> JPEG image/GIF image/ animated GIF/Flash movie Multiple attachment files Select a phone number or mail address in the Melody message text/C/[Add to phonebook]/add to the phonebook.
Page 226
Managing Message R/F What is Early Warning “Area Mail”? ■ Protecting Message R/F <Protect> Protect up to 25 of each type of message. The number of protected Area Mail is a service to receive the information such as an messages depends on size. emergency earthquake report provided from the Japan Unread Message R/F cannot be protected.
Page 227
The tone of the Area Mail dedicated ring tone cannot be changed. Receive Area Mail The Beep time follows the Mail ring time setting, the volume Receiving Early Warning “Area follows the Mail ring volume and the vibrator follows the vibrator Mail”...
Exchange messages with users of non-DoCoMo overseas SMS that cannot be sent for an unspecified reason is saved as telecommunications carriers. Refer to the DoCoMo website for unsent SMS. information on available countries and overseas telecommunications carriers.
Page 229
Depending on the signal status, text for recipient may not appear Checking for new SMS <Check new SMS> correctly. Received SMS is held at the SMS center while the handset is outside the When the 2in1 mode is set to [B mode], SMS cannot be composed service area, in Self mode, or turned off.
Page 230
Select the setting/t. Saving to the FOMA card Receiving notification of SMS retrieval Copy SMS saved in the FOMA terminal handset to the FOMA card. <Report request> Up to a combined total of 20 received and sent SMS can be saved Set whether to receive a delivery report for SMS.
Page 231
i-appli What is i-appli? ....... . <i-appli>230 Downloading i-appli from sites ....<Download>230 Activating i-appli .
Page 232
If software currently saved in the handset is deleted because of i-appli insufficient memory during download, and download fails due to a What is i-appli? weak signal strength, the deleted software cannot be restored. o appears while i-appli information or i-appli is being downloaded Download i-appli software from sites for more convenient from an SSL-enabled page.
Page 233
■ Downloading mail-type i-appli software Activate i-appli Note the following when downloading mail-type i-appli software. Activating i-appli When downloading mail-type i-appli software, mail-type i-appli folders are automatically created in Inbox, Outbox and Unsent Some i-appli software may transmit data automatically when messages.
Page 234
Some i-appli may save i-appli used data to the microSD Card. (purple) Software set as i-appli stand-by Saved i-appli used data can be checked in the i-appli used data (purple) Software set to Auto start list. Check i-appli used data properties for the software that uses i-appli used data (nP.
Page 235
Set Power saver of i-appli <Power saver set> Setting operating conditions for i-appli In the Custom menu, select [i-appli]/[Power saver <Set software use> set]/[ON]/select the time before activating the Power Set the following operating conditions for each software. saver mode/t. Set the Program guide i-appli started from 1Seg Network set Set whether data can be transmitted while...
Page 236
Press i. Motion tracking compatible i-appli Note The FOMA terminal supports “Motion tracking” to operate i-appli (by tilting and shaking (or swinging) the FOMA terminal) through the Network set recognition technology of the camera. Software may not function properly and information may not be Motion tracking may not be used in the following cases.
Page 237
Select a game/t. モバイルGoogleマップ (Google Map for Mobile) アバターメーカー for SH (Avatar Maker for SH) Press C to show the option screen. 日英版しゃべって翻訳 for SH (J-E Speech Translation for SH) Press i to change the volume during a game. 日中版しゃべって翻訳 for SH (J-C Speech Translation for SH) Games and main operations 地図アプリ...
Page 238
■ デビル メイ クライ for SH (Devil May Cry for SH) ■ ファミリンクリモコン for AQUOS (Familink remote control for AQUOS) This is a wide-screen compatible and fully-fledged 3D action game to operate the devil hunter, “ダンテ (Dante)”, to clear various missions. Operate with the FOMA terminal by using Enjoy the game in the vertical or horizontal screen.
Page 239
Select [検索]. テレビを見る View the screen for controlling TV. Operate to record a program or view Select [はい]. the program/counter program guide. Switch broadcast types or the screen for the TV control to the channel selection screen from the Submenu. Select [はい(以後表示しない)] to subsequently not display the confirmation screen for connection.
Page 240
Packet transmission charges apply for transmitting. Using the avatar as Machi-chara Send the created avatar to the site to download from the site as In the software list screen, select [アバターメー Machi-chara. Select [マチキャラ] in the top menu, select the avatar カー...
Page 241
Setting a timer for starting 1Seg ■ Gガイド番組表リモコン (G-GUIDE program schedule remote control) Select a 1Seg program to be started from the program guide of terrestrial digital shown by this appli and set a timer for starting the 1Seg program. How to set a timer for starting a 1Seg program Search by genre Search by keyword...
Page 242
Receiving the recommended information via mail Translating Japanese to English Set .TV mail to receive the program information according to keywords In the title screen, select [JpnbEng translation]. via mail. Activate this i-appli directly from the mail or display program When translating English to Japanese: Select [EngbJpn translation].
Page 243
Packet transmission charges apply when this service is used. ■ 日中版しゃべって翻訳 for SH (J-C Speech Translation for SH) Refer to “Mobile Phone User’s Guide [i-mode] FOMA version” for Just speak to the FOMA terminal, and then Japanese will be details on 楽オク (Rakuoku). translated to Chinese and Chinese to Japanese.
Page 244
DCMX/DCMX GOLD the site services that provide more credit and DoCoMo points than DCMX mini. The screen shown is only an example. Actual screens may differ. DCMX mini allows you to enjoy Mobile phone/ When this appli is activated for the first time, “notes regarding use”...
Page 245
Packet transmission charges apply when this service is used. Familink remote control for i-appli To: Yes Precautions for Osaifu-Keitai compatible i-appli AQUOS DoCoMo shall not be liable for the information set in the IC card. Internet dictionary Network set: Yes i-appli To: Yes Icon info set: Yes...
Page 246
Note Auto start Running i-appli automatically If Auto start cannot be started, the error is recorded in the Auto start error history. There are three methods to automatically start i-appli. Automatic startup is not available in the following situations. Handset is turned off i-appli is running Auto start using the Set Auto start to [ON] to enable.
Page 247
i-appli To Related Operations Running i-appli from sites or i-mode Set the software startup time with FOMA terminal settings mail In the Custom menu, select [i-appli]/[Auto start]/ [Details set]. If i-appli To (Run i-appli) is set, i-appli can be started from a Select a number.
Page 248
Depending on the software settings, the software may start Note automatically after downloading is complete. In such cases, the Only one software can be set as i-appli stand-by. software cannot be saved to the FOMA terminal immediately after Some software cannot be set as i-appli stand-by. downloading.
Page 249
Set i-appli stand-by from the menu The following operations end stand-by i-appli. <Stand-by display> In the Custom menu, select [Settings]/[Disp/LED/ Camera iC transmission Power saver]/[Set screen]/[Stand-by display]/ Data box Ir exchange [i-appli]. i-mode Bluetooth communication Select software/t. Mail Downloading i-appli To set a different i-appli as stand-by: Select [Settings]/ Videophone...
Page 250
■ Upgrading <Upgrade> Related Operations Upgrade software saved in the FOMA terminal if a new version is View Trace information <Trace info> available on the site. In the Custom menu, select [i-appli]/[Trace info]. In the software list screen, select software/C/ If there is no Trace information, [No Trace info available] [Upgrade]/[Yes].
Page 251
Note Used by i-appli (Contents transfer compatible) Viewing i-appli used data in the When deleting mail-type i-appli, select whether to simultaneously delete automatically created mail folders. If the folder contains microSD Card protected messages, the folder cannot be deleted. When i-appli used data of the software to be deleted is saved to Delete i-appli used data folders or view detailed information of a the microSD Card, select whether to delete the i-appli used data selected folder.
Page 252
Using the camera Using various i-appli functions When the camera is started from i-appli, shot images are saved and used as a part of i-appli. Depending on software to be used, operation methods may vary or While software is running, select camera startup/ some functions are not available.
Page 253
Saving ToruCa Using Ir exchange/iC transmission While software is running, select a ToruCa item/ Not available while in the Self mode. While software is running, start Ir exchange/iC transmission/[Yes]. Preview/Save item. To cancel transmission: Press C. Select [Preview]. Select [Save new]/select a folder/t. Select [Overwrite]/select data/t/i.
Osaifu-Keitai compatible service supported by the iC data. transfer service can be transferred. DoCoMo shall not be liable for any loss of content or the damage of *4 Packet transmission fees apply to download/various settings of Osaifu-Keitai service caused by any reason such as malfunctions i-appli.
Holding the FeliCa mark up to the scanning Starting Osaifu-Keitai compatible device i-appli Hold the FeliCa mark up to the scanning device to enable payment with electronic money, replacement for railway tickets, as well as other functions. Using Osaifu-Keitai Pay attention to the following points when holding the FeliCa mark Use Osaifu-Keitai in the following procedure.
Precautions for using Osaifu-Keitai ToruCa What is ToruCa? Use Osaifu-Keitai even when the handset is turned off. Osaifu-Keitai is not available in the following situations. ToruCa is an electronic card that can be retrieved with The power has never been turned on after the battery pack was Osaifu-Keitai.
■ Retrieving ToruCa Retrieve ToruCa Retrieving ToruCa Scanning device Site Save up to 200 ToruCa. Capacity varies depending on size of ToruCa. Retrieve/Save ToruCa up to 1 KB each and ToruCa (details) up to 100 KB each. Hold the FOMA terminal up to the scanning device to use ToruCa Mail with the automatic reading function.
Note Note ToruCa cannot be retrieved using a scanning device when the IC ToruCa (details) cannot be retrieved from ToruCa saved on a card lock is set or when Retrieve ToruCa from IC card is set to microSD Card. [OFF]. Retrieve/Update ToruCa (details) with i-mode transmission.
Page 261
1ToruCa type Related Operations (orange) Unread ToruCa Add phone numbers and mail addresses in ToruCa to the phonebook Unread ToruCa (expired) <Add to phonebook> (gray) In the ToruCa/ToruCa (details) display screen, select a (orange) Read ToruCa phone number or mail address/C/[Add to Read ToruCa (expired) (gray) phonebook]/add to the phonebook.
■ Deleting specified Sort rules File attachment ToruCa exceeding 1 KB, ToruCa (details) exceeding 100 KB, Select a user folder/C/[Sort rules]. non-redistributable ToruCa and used ToruCa cannot be Select a Sort rule/C. attached to mails. When ToruCa (details) attached to mail includes an image with Select the deletion method/t/[Yes]/i.
Page 263
■ Applying the Function lock to ToruCa ■ Moving or copying ToruCa <Function lock> <Move/Copy> For details on Function lock nP. 134 Select ToruCa/C/[Move/Copy]. In the folder list screen, press C/[Function lock]. Select an item/t. Enter the terminal security code/t/[ON]. Select the move/copy method.
Searching ToruCa ToruCa settings Setting ToruCa Search ToruCa in the FOMA terminal handset by genre of category icons, index or title. Set to use ToruCa. Select a folder/C/[Search]. Item Setting details Select the range of search/t. ToruCa from IC Set whether to retrieve using a scanning device and iC transmission.
Note Note When ToruCa auto read is set to [OFF], some functions of ToruCa Alternatively, set Omakase Lock to automatically lock the IC card. may not be available. While the IC card lock is set, ToruCa cannot be retrieved using a When the FOMA terminal is held up to the scanning device if scanning device, and the automatic reading function is not ToruCa auto read is set to [OFF], a confirmation screen may...
GPS Function Using GPS function ........266 Positioning your location .
Page 268
Position location Using GPS function Positioning your location Note that DoCoMo shall not be liable for the pure economic loss if Position the present location and check your place. Use this you cannot confirm the positioning (communication) result with function for more convenient use such as showing a map from...
• Check peripheral area information using “iエリア (周辺情報)” menu]/[Set position loc.]/[Positioning mode]/ (i-area (peripheral area information)) after displaying a map. Refer to the DoCoMo website for “iエリア (周辺情報)” service. select the Positioning mode/t. Select [Run i-appli]/select i-appli/t. When [Quality mode] is selected, the positioning is performed Select [Paste to mail]/[OK]/compose and send a mail.
Page 270
Enter the information with voice to use transfer Basic service: Service provided by DoCoMo for free information easily. Additional services: Services provided by ZENRIN DataCom for a fee Use the additional services (except the traffic information) for free until...
Page 271
■ Map display screen and operations ■ Starting the “地図アプリ” In stand-by, press i (,) (for 1+ seconds)/[地図アプリ]. Each menu appears on the TOP screen. Close the menu to view the previously searched map. When the software is activated for the first time, the user agreement and the safety TOP screen precaution appear.
Page 272
Key operations while displaying quick access menu Key operations while displaying result to search the neighborhood information o (周辺を調べる) To check the peripheral area To confirm details Select a search result/t information around the location information of search When the cursor is not placed on the displayed on the map result search result, the quick menu appears.
Page 273
Select the [出発地] field/t/select an item/ Select the [条件設定] field/t/select an item/ t/set a departure place. t/set the condition/[上記で設定]/[OK]. Select a priority criterion of selecting transfer 現在地 (GPS) Position the present location to set (only for 乗換条件 among “早い”, “安い”, and “楽々”. setting a departure place).
Page 274
■ Navigation (automobile) display screen and Key operations while displaying quick access menu operations o (目的地周辺^) To search a parking area around the destination Navigation (automobile) display screen layout p (結果&設定) To display the route search result (time, fare, etc.)/To set the navigation q (経由地を設定) To search a route to the destination with up to three stopover places added...
Page 275
Location information is provided free of charge. mapping appli site for PC. For the use of location information, check the information of a service provider and DoCoMo website. Charges may apply for Related Operations these functions. Move a map by tilting the FOMA terminal In the TOP screen, select [Extra]/[地図モード]/[直感地...
Page 276
In the Custom menu, select [LifeKit]/[GPS Related Operations menu]/[Loc. request menu]/[Loc. prov. ON/ Set Positioning mode of Location provision OFF]/enter the terminal security code/t. <Positioning mode> In the GPS menu, select [Loc. request menu]/[Positioning Select the setting/t. mode]/select the Positioning mode/t/[OK]. Note Location provision can also be set from initial settings.
Page 277
Start: 09:00 End: 22:00 Setting details Schedule when location Setting details provision is performed Schedule when location Repeat Valid period provision is performed Repeat Valid period Set day From 07/27/2008 Set day of week from 07/27/2008, of week End date 08/27/2008 15:00 to 08/28/2008, 10:00 Not set 07/22/2008, 14:00 to...
Page 278
Setting host When the location information is requested <Host setting> Set the host for the GPS service setting site. Location provision starts when the request to provide the location ※ Setting does not normally need to be changed. information is received. When each service usage setting is set to [許可], the location In the Custom menu, select [LifeKit]/[GPS information is automatically provided upon request.
Page 279
See the information of a service provider supporting Location Save up to five service clients to notify the present location. notification or DoCoMo website. In addition, subscription to a In the Custom menu, select [LifeKit]/[GPS service provider supporting Location notification and a service menu]/[Loc.notification/set]/[Notification...
The phone number already saved as location service client Location history cannot be added. Displaying the history of confirmed Select [Auto]/select the setting/t. location information If automatic notice is set to [Yes], automatically notifies the present location to the recipient when a voice call is made to a Up to 50 entries of location information positioned by GPS saved phone number.
Page 281
Select the location history/t. Note Accuracy is a rough indication. It may differ depending on the radio wave condition of the surroundings. The entry that has failed or interrupted to position for Position location is not saved as Location history. If the location information is provided when the 2in1 service is Location history used, the requestor name for Location provision appears in each...
Page 282
Using added location information Using location information from ■ Using location information in the FOMA terminal each function handset phonebook or in the images saved in My picture of Data box Use location information with each function by adding Example: Phonebook location information to data such as phonebook and still pictures or displaying a map based on the added location In the phonebook entry details screen, select...
Page 283
1Seg What is 1Seg? ........282 Before using 1Seg .
Page 284
About signal What is 1Seg? 1Seg is one of the broadcasting services, and the signal (broadcast wave) different from that of FOMA service is received. Therefore, it cannot be What is 1Seg? received at the place where the broadcast wave does not reach or during the hours when the broadcasting is out of service, regardless of whether 1Seg is a terrestrial digital TV broadcasting service for mobile devices the FOMA terminal is outside or inside the FOMA service area.
What is broadcast storage area? Before using 1Seg A mobile phone has a storage area that is used exclusively for 1Seg information. This area is called broadcast storage area. When Procedures for watching 1Seg watching a program, the user may enter some information, following instructions provided in the data broadcasting area.
DoCoMo shall not be liable for any loss or change of the saved data Perform Auto channel setting inside the area of a terrestrial digital due to malfunctions, repairs or other handling of the FOMA TV broadcasting service.
Page 287
Delete a channel list <Delete> Saving preset channel list <Preset CH setting> Select a channel list/C/[Delete]. Save broadcast stations in a prefecture/district, selected from the Select the deletion method. information, into the channel list for your current prefecture/district. Select [Delete one]. In the Custom menu, select [1Seg]/[Channel Select [Delete selected]/select a channel list t (repeatable)/C.
Page 288
■ In the normal position Normal position Viewer position In stand-by, press C (for 1+ seconds). s (for 1+ seconds) To turn Caption – Settings ON/OFF In the Custom menu: Select [1Seg]/[Activate 1Seg]. When the message confirming whether to initialize the broadcast To activate the –...
Page 289
When f appears, the handset is in a place where broadcast Normal position waves cannot be received. To record 1Seg programs as a still picture i 7Icon indicating the recording status c, 1 to 9, 0, *, # To operate data broadcasting &...
Page 290
cIcon indicating Bluetooth output Switch the display size of video and data broadcasting in the viewer position <Display mode (W)> Bluetooth outputting In the 1Seg watching screen, press C/[Display settings]/ dIcon indicating volume [Display mode (W)]/select a display method/t. N (Volume 0) to P (Volume 10), M (Mute), Set whether to show icons in the viewer position S (Bluetooth outputting) <Mark display (W)>...
Page 291
Set the duration to automatically stop 1Seg <Off timer> Compose introduction message In the 1Seg watching screen, press C/[Off Send to the FOMA terminal supporting Media To function so timer]/ that the recipient can select the information and activate 1Seg. select the setting/t.
Page 292
Note Using another function while watching 1Seg It takes approximately 5 to 15 seconds per a broadcast station to While watching 1Seg on Multi Window, use another function. download program images (still pictures) depending on the reception status. During download, 2 is flashing at the bottom of the screen. Setting operations while watching 1Seg program <1Seg settings>...
Page 293
While watching 1Seg, press $. Note To use mail function: Press m (for 1+ seconds). When talking in the viewer position, use the flat-plug earphone/ Select a function/t. microphone with switch (sold separately). After a call is ended, 1Seg may starts automatically. At this time, Setting the viewer position in Multi Window the voice and sound are played in the volume for 1Seg.
Page 294
The videos recorded to the microSD Card are automatically Note named as [PRGxxx] (“xxx” is a single-byte alphanumeric) Called LED flashes red while recording movies. The recording of some videos may be prohibited. While recording movies, the following operations are not available. Video recording cannot be started while the Multi Window is displayed.
Page 295
In the viewer position: Press <. Select [Recording]/[Yes]/[Yes(Always)]. The still image is recorded and then automatically saved. A few • Select [Yes(Always)] to subsequently not display the moments may have to pass until the image is saved. confirmation screen for recording. Enter the start/end date and time/t.
Page 296
For details on the following operations nstep 3 of “Setting In the timer setting screen for starting/recording, date/time and a channel” on P. 293 select [Start ann]. If start announcement is set to [OFF] and the linked startup When setting timer for starting programs: Select [ON]. settings are changed, Wakeup TV is not activated.
Page 297
1Timer classes Note In the following cases, Reception reserve alarm and Recording reserve Reception Recording alarm are activated. However, watching or recording does not start. 2Alarm When a function that cannot be activated simultaneously with 3Start time 1Seg is being used When a FOMA card is removed or a different FOMA card is 4End time inserted after setting timer...
Page 298
1Number of entries/total entries Managing timer for starting or recording programs 2Icons indicating the recordings ■ Deleting the timer settings <Delete> Complete Failed In the Custom menu, select [1Seg]/[Booking list]. 3Icon for destination of video to record Select a timer/C/[Delete]. In the timer details screen: Press C/[Delete one]/[Yes].
A confirmation screen is displayed in the following cases. Select [Yes]/[Yes(Always)] and then execute the operation. Select Using data broadcasting [Yes(Always)] to subsequently not display the confirmation screen. When deleting the the broadcast storage area Use data broadcasting as well as video, voice and sound for When using data in the broadcast storage area 1Seg.
TVlink Related Operations Using TVlink View detailed information <Show details> Select a TVlink/C/[Show details]. Save memo information and URL in some data broadcasting Delete TVlink <Delete> as TVlink. Use the TVlink list screen to show memo Select a TVlink/C/[Delete]. information and a site saved in there. Select the deletion method.
Page 301
Deleting saved data of data broadcasting Setting whether to acquire ToruCa automatically from data broadcasting/data broadcasting site <Erase storage area> <BC ToruCa setting> Delete the data in the broadcast storage area. In the Custom menu, select [1Seg]/[1Seg In the Custom menu, select [1Seg]/[1Seg settings]/[Erase storage area].
Page 302
Resetting 1Seg settings <Reset 1Seg> The following items are restored to their default settings. Set image display Sound FX Vibrant image mode Brightness Dolby sound settings BC ToruCa setting Startup auto connection of Bluetooth output 1Seg settings in the 1Seg watching screen When resetting 1Seg settings, the Reset status display settings are made at the same time.
Full Browser/PC Movie Viewing web pages designed for PC..... . . 302 Setting Full Browser ........306 Internet movie player .
Page 304
• Enter up to 2,033 single-byte characters (including http://, etc.). Viewing web pages designed for PC Note View Internet web pages that are not supported by i-mode as Some Internet web pages with large amounts of information do not they appear on PCs with the FOMA terminal using the Full appear properly.
Page 305
Full Browser display Shortcut Operation from Action operation Submenu Basic operations for Full Browser are the same as when accessing [Display/set]/[Zoom] To shrink/zoom magnification sites from the i-mode Go to location menu. Operations that differ are – To scroll up the page mainly explained here.
Page 306
In the viewer position, the following operations are available. ■ Viewing pages using frames • To switch windows: Touch a tab at the upper of the screen. View Internet web pages consisting of multiple frames. Select a frame • To scroll a screen: Touch the touch panel and slide the finger up/ in the frame selection screen to show a page per frame.
Page 307
C/[Bookmark]/ While viewing the site, press Move to the bottom of the screen <Go to end> [Add bookmark]/[OK]. While viewing the site, press C/[Display operation]/ [Go to end]. To edit the title and save: Select the [Title] field/t/edit the title/t. Select area with drag operation and copy <Select area/drag>...
Downloading files connected. This information is used when the site is accessed again. DoCoMo shall not be liable for any information obtained by a third Downloaded files are saved to the microSD Card. party as a result of validating cookies.
Page 309
In stand-by, press i/[Full Browser]/[FB server of the link destination when following links in sites. Settings]/[Sound effect]. DoCoMo shall not be liable for any information obtained by a third party as a result of using Referer. Select the setting/t. In stand-by, press i/[Full Browser]/[FB Note Settings]/[Referer Setting].
Page 310
Setting whether to use the terminal data during Internet movie player Flash playback <Use phone info> In stand-by, press i/[Full Browser]/[FB Play movies for PC (PC movies) provided in portal sites or Settings]/[Use phone info]. movie dedicated sites on the Internet with the Internet movie player of the FOMA terminal.
Page 311
When Original is selected Internet movie player Playing PC movies Sound Space Natural Bass Select a PC movie/t/[Yes]/[Agree]. Sound Level Cnt Depending on the PC movie, if [Yes] is selected, the playback may be started. Mono-to-Stereo 5Volume } (Volume 0) to | (Volume 10) When the FOMA terminal is set to the viewer position, the Full-screen mode is activated.
Page 312
In the viewer position, the following operations are available. Related Operations • To adjust the volume (Volume 0 to 10): Touch the touch panel Set Dolby sound <Dolby Sound Set.> and slide the finger up/down. In the PC movie playback screen, press C/[Dolby •...
My picture(microSD) Data box and Media tool bphone Change to [My picture(phone)] Camerafolder xxx Folder for still pictures shot with the FOMA Data is stored in different folders according to type. terminal, DCF-compliant JPEG images, and After a data type is selected, the last location (FOMA terminal GIF images (except animated GIFs) handset or microSD Card) used to view that type is displayed.
Page 315
■ MUSIC (nP. 375) i-motion (microSD) ® Chaku-uta full or WMA files are saved. Multimedia Folder for voice-only i-motion, and data either recorded with Voice recorder or transferred from MUSIC a PC Playlist Folder for playlists created on a FOMA terminal, (User folder for User-created folder PC, etc.
Page 316
■ Melodies (nP. 331) My Documents(phone) Melodies are saved. (User folder) User-created folder Melody(phone) My Documents (SD) bmicroSD bphone Change to [Melody (microSD)] Change to [My Documents(phone)] i-mode Folder for melodies retrieved from sites, i-mode Folder for PDF files copied from a FOMA mail, Message R/F, etc.
Page 317
■ Machi-chara (nP. 331) Manga&Book(microSD) Machi-chara are saved. bphone Change to [Manga&Book(phone)] Machi-chara Manga&BookReader Folder for e-books retrieved from sites or saved from PCs i-mode Folder for Machi-chara retrieved from sites, etc. Comic Folder for e-books retrieved from sites, etc., for Pre-install Folder for previously saved Machi-chara which a read limit is set...
Page 318
Note Data list screen layout The title can be displayed up to 16 single-byte (8 double-byte) After a folder is selected, the data list screen is displayed. Select a characters. view method from the following four settings. For i-motion 12-part and 20-part display, the following may be [5-part/details] can be set in only My picture and the [Substitute displayed instead of the image.
Page 319
Note Icon types and explanation Melody type ■ File type icon When MFi (3D data) is saved in the [Movable contents] folder, MFi Still picture types (no 3D data) icon appears. However, 3D data is retained. JPEG ■ Detailed information icon Icon: QCIF: 1Seg:...
When displaying the next/previous image in the viewer position, Image Viewer the image may be distorted, or not displayed. Displaying saved images Related Operations Display the image saved in My picture of Data box. Change the screen display method <Full-screen mode/Wide mode> In the Custom menu, select [Data box]/[My picture].
Page 321
Perform the same operation in the image display screen or Add/Use location information <Location info> while stopping Flash movies, for setting. In the image display, press C/[Location info]. Select a screen item/t. For details on location information nP. 280 Note (Related operations) To set as the stand-by display: Select [Stand-by display]/ [Yes]/select the display size/t.
■ Editing type icons Edit image Select the editing type icons to access editing menu directly. Editing still pictures (SPEEDYLAB) trimming resize rotate Compare before and after images while editing without Trimming Resize image Rotate interruption. (nP. 321) (nP. 321) (nP.
Page 323
■ Saving an edited still picture Note In the image editing screen, press i/[Yes]. The aspect ratio is maintained when a still picture is resized. For images with differing aspect ratios, use Trimming to use as icons To edit after saving: In the image editing screen, press m. or Videophone substitute images.
Page 324
Decorating faces Pasting Face stamps <Face effects> <Face stamp> Add expressive effects to one’s face. In the image editing screen, select [stamp]/[Face stamp]. In the image editing screen, select [effect]/[Face effects]. Select the type/t. To save a still picture nP. 321 Select the type/t.
Page 325
Select the type/i. Select an effect/t. To save a still picture nP. 321 To select editing types n“Editing type icons” on P. 320 To save a still picture nP. 321 Setting contour manually <Change face pos> Note Manually set the contour information for each part of the face used in When facial contours are not properly extracted nP.
Page 326
Playback continues even if FOMA terminal is closed. i-motion player Playing movie/i-motion ■ Operations during playback Normal position Viewer position Play back an i-motion saved in the i-motion folder of Data box. Connect commercially available Bluetooth devices, and play sound To pause/play Operate with the of i-motion (nP.
Page 327
In the normal position, when in Full-screen mode display, Track Voice operations for u and v are switched. Hold the FOMA terminal type sideways and perform operations. Image Ticker Note For the data with restrictions, the operation may not be available No audio or the Total time in the playback screen may not appear correctly.
Page 328
Light up <Light Up> Frame rate In the i-motion playback screen, press C/[i-motion For some voice only i-motion, [Fine] is not available and forwarding frame is set to [Rough (hi-speed)]. setting]/[Light Up]. In the following cases, the forwarding frame rate is set to To light up with one-touch: In the i-motion playback screen, [Rough (hi-speed)].
[Yes]/select the display size/t. Movie editing may not be available for some data recorded on • Zoom is not available for image sizes other than sQCIF: devices other than the FOMA SH906i. 128×96 or QCIF: 176×144. ■ Editing type icons Select the editing type icons to access the editing menu directly.
Page 330
Perform one of the following to select the editing type. Cutting movies <Image cutter> In the image editing screen, press u to select the editing type icon/t. Cut out a portion and save it as a new movie. In the image editing screen, press C/select editing type/t. For mail (short) To automatically cut approximately 500 KB from a starting point.
When a video edited (split) by other devices is played, the image 1Seg and the sound may be interrupted. Playing back videos or still pictures Data broadcasting display while playing back a video that recorded 1Seg When a video is played back, the information for the broadcast station from which that video was recorded is displayed.
Normal position Viewer position Chara-den player What is Chara-den? To stop To play back from – the beginning: During a Videophone call, send a character instead of camera Press i. image. A character can be made to perform various actions. 1: Beginning To jump to a start For details on downloading Chara-den nP.
To cancel an action Machi-chara Displaying Machi-chara * Execute the action corresponding to a number on the action list. For details on Machi-chara nP. 120 Related Operations In the Custom menu, select [Data box]/ Set playback light <Backlight time> [Machi-chara]. In the Chara-den playback screen, press [Backlight time].
In the Custom menu, select [Data box]/[Melody]. Set 3D sound/surround <Stereo effects> In the melody playback screen, press C/[Melody Select a melody/m/compose and send a mail. settings]/[Stereo effects]. Alternatively, press i to make the settings. Note Select an effect/t. Melody may not be played properly if other party is using a model For details on effects n“Setting the 3D sound/surround”...
The FOMA SH906i is compatible with microSD Card of up to 2 GB Data saved on microSD Cards from other devices may not be and microSDHC Card of up to 8 GB (as of April 2008). Refer to the displayed or played on a FOMA terminal. Some data saved on a...
Close the microSD Card slot cover. An alert tone sounds if a microSD Card is inserted or removed while the power is on. Folder configuration of the microSD Card The following shows the folder configuration of a microSD Card and the file names of the data to be stored in each folder.
Page 337
| BOOK | PRIVATE | DOCOMO Manga&BookReader folder | DOCUMENT aaaaaa.ZBF/ZBK/TXT/TEXT | PUDfff | aaaaaa PDF Viewer folder User created folder gggggg.PDF/$DF/DDF aaaaaa.ZBF/ZBK/TXT/TEXT | MMFILE | DCIM Voice Memo, i-motion (including music data in AAC Still picture folder format ), WMA file folder | bbbSHARP MMFcccc.MP4/ASF/3GP/SDV/M4A...
| SVC00001 to SVC00004 *3, 4 sound data of i-motion (including music data in AAC format) saved in the \PRIVATE\SHARP\VOICE folder of the microSD Card, move the data to the \PRIVATE\DOCOMO\MMFILE folder. After that, update the manager information of the microSD Card.
■ Number of files saved to a microSD Card Copying from the FOMA terminal to the microSD The actual figures may be less than the above depending on the Card <Copy to microSD> size of the data and the capacity of the microSD Card. Example: Phonebook Function Number of files...
Schedule Copying from the microSD Card to the FOMA The following data cannot be copied. terminal <Copy to the phone> Alarm information other than alarm time Image settings Contacts Secret settings Example: Phonebook Reception, Recording Set holiday In stand-by, press a/C/[View microSD data]. Data with no end date/time set will be copied with start date/time Select data/C/[Copy to the phone].
Contents transfer compatible Transferring data from the microSD Card to the Transferring data between the FOMA FOMA terminal <Move to the phone> terminal and the microSD Card Example: i-motion In the Custom menu, select [Data box]/ Transfer downloaded data that have restrictions for output [i-motion]/[b microSD]/[Movable contents].
Phonebook Backup/restore The saving destinations for name, reading, phone number and Backing up/Restoring the FOMA mail address may change. terminal handset data The phonebook 2in1 settings are also backed up. The following data is not backed up. Backup data from the following functions and dictionary data Secret code Ring tone settings to a microSD Card.
Bookmark Reading backup data from the microSD Card to Because folder information is not backed up, restored bookmarks the FOMA terminal are saved to the [Bookmark] folder. In the Custom menu, select [LifeKit]/[microSD When restoring backup data to the terminal, selecting either manager]/[Backup/restore]/[Restore c microSD].
View microSD data Using as a microSD reader/writer <USB mode setting> Previewing the microSD Card data The following shows the mode for connecting the FOMA terminal to a PC with the FOMA USB Cable with Charge Function 01/02 (sold In the Custom menu, select [LifeKit]/[microSD separately).
In stand-by, press t/select the stock icon D Note (USB mode setting)/t. The following devices are required to use the FOMA terminal as a When USB mode setting is set to [microSD mode]/[MTP mode], microSD reader/writer. the stock icon does not appear and the PC is connected in the Item Explanation microSD mode/MTP mode.
Import folder to the FOMA <Import> terminal. Use the DoCoMo keitai datalink (nP. 446) to copy data created on a PC or other devices to the Import folder of the microSD Card. Use the FOMA terminal to check the data.
Use the following operations to manage each data. Managing folders Manage folders Manage data ■ Creating user folders <New folder> Create up to 20 user folders in Data box for each data type. Create up to 397 user folders in Manga&BookReader. In the [Comic] folder, create up to 999 further folders.
Page 348
■ Setting the security for user folders <Folder security> Managing data Set the security for user folders in the FOMA terminal. ■ Editing title When the folder security is set, the folder icon changes to =. Enter <Edit title> the terminal security code to display data in the folder. Title names are names that appear on data lists.
■ Sorting data <Sort> Data cannot be moved without user folders. Example: My picture For Data box, when moving data from a user folder to the original In the data list screen, press C/[Picture folder, only individual move is available. setting]/[Sort].
Note Cannot delete all in folder for data set as stand-by display, ring tone and other functions. Data in the [Pre-install] folder of My picture and Melody, or Supportbook of Manga&BookReader cannot be deleted. To use the preset data again after deleting them, download the preset data from the iMenu site, [SH-MODE] (nP.
■ Data that can be sent from the FOMA terminal Ir exchange Ir exchange Function Phonebook Use Ir exchange to send and receive data to and from other Schedule FOMA terminals which also support Ir exchange. In addition, Text memo use Ir exchange with i-appli software to operate i-mode mail, SMS, Area Mail simultaneously with other devices which support Ir...
Page 352
Data with no end date/time set will be received with start date/time Decome-Anime Templates set as end date/time. The following types of data cannot be sent. Received or downloaded Decome-Anime Templates from Secret schedules cannot be sent individually unless Secret mode devices other than the FOMA terminal that have file restrictions is set to [ON].
Face the Infrared ports of the receiving and sending FOMA terminal Storage Function One All Storage order each other and set the distance between them to approximately 20 location cm or less as shown above. Decome-Anime Decome-Anime While doing Ir exchange, leave the Infrared ports facing each other –...
Sending all data items <Send Ir data> Example: Phonebook In stand-by, press a/C/[Send data]/[Send Ir data]/[Send all]. Set the receiving FOMA terminal to receive all data. Enter the terminal security code/t. When phonebook is received Enter the authentication password/t/[Yes]. Ready the sender’s FOMA terminal to send a single data item. If the entered authentication password matches an authentication The FOMA terminal waits to receive data.
Remote control operation Using Ir exchange with i-appli Start i-appli software that supports Ir remote control functions, point software the FOMA terminal’s Ir port to the front of the remote control sensor on the TV, VCR or other device to operate, and perform remote control Use the Ir exchange function from running software.
Sending and receiving data may be difficult according to other iC transmission party’s FOMA terminal. In such cases, make the clearance between iC transmission the FeliCa marks (b) closer or farther, or move them up/down/left/ right alternately. Use iC transmission to send and receive data to and from other During iC transmission, FOMA terminal called LED flashes (nP.
Voice recorder Sending and receiving all data items Using the FOMA terminal handset as a voice recorder Terminal security code and authentication password entry are required for sending or receiving all data items. The authentication Use the FOMA terminal as a voice recorder (microSD Card is password is a password exclusively for iC transmission.
– Display previous page Save files in advance to My document of Data box or – Display next page \PRIVATE\DOCOMO\DOCUMENT\PUDxxx folder on microSD – Full-screen Card. To save to microSD Card, save the file and update the [Light Up] Light up microSD Card manager information (nP.
Page 359
*1 Press key multiple times to zoom/shrink screen in 10% increments/ Display the bookmark list <Display bookmark> decrements, up to 1,000% and down to 8%. In the details screen, press C/[bookmark ・ mark]/ *2 Rotate only left by the shortcut operation. [Display bookmark].
Search for text string <Search> Document Viewer In the details screen, press C/[Search]/enter a text Displaying Word and Excel files string/t. To search for the next search result: Press a (or C/[Next Display files saved on microSD Card, such as Microsoft result]).
■ Key operations during display Manga&BookReader Displaying e-books/e-dictionaries/ Shortcut Operation from Submenu Action operation e-comics [Shrink] Shrink screen [Rotate view] Rotate 90º left An e-book/e-dictionary/e-comic can be viewed on the FOMA terminal. [Zoom] Zoom screen e-books, e-comics, etc. can be downloaded from sites (nP. 183). [Magnifier]/move / cursor Enlarge/Shrink with The following e-comics, e-dictionaries, etc.
Note C/[Move]/ To jump to first page [To top] The following file extensions of e-books, etc. can be viewed. To view previous pages in backward order (when e-book .zbf, .zbk, .txt, .text there is a history) e-dictionary, e-comic .zbf c (or To return to list screen [Move]/[List]) If data ended by pressing c in previous viewing is selected, the...
Page 363
Jump to the last page Note (Related operations) <To end> In the details screen, press C/[Move]/[To end]. Switching display folders Display folder with e-book of XMDF format that was used on Move to a page by specifying a percentage <Set % move> non-FOMA terminals such as mobile information devices.
Image: Select an image/t/[Move to link]. Searching in e-dictionary Select [Yes]. Enter the word to search in an e-dictionary. For URL, select a connection method to connect to sites. The e-dictionary is available on the following SHARP original For details on making a call, sending mail, or connecting to a website, “Sharp Space Town”.
DoCoMo shall not be liable for handling of CCCD (Copy Controlled CD) or even if music data cannot be saved as a WMA file. Music data saved on the FOMA terminal handset or the microSD Card can be used for personal use only. Refrain from infringing upon intellectual property rights of a third party’s copyrighted material.
■ Background playback For the program with voice only, view mail or i-mode sites while What is Music&Video Channel? playing the program. Refer to “Multi Assistant (Multitask) combinations” on P. 482 for the combinations of functions that can Music&Video Channel is a service that programs of be used simultaneously.
4Program type icon When the program is set (yellow) Program successfully acquired 0 appears in stand-by 12 hours before the program distribution. The Program failed to be acquired acquisition of the program is automatically performed at night. When the acquisition is successfully completed, the stock icon t (download Program that has never been played (blue) successful) appears in stand-by.
Programs whose replay restrictions are exceeded cannot be Note re-acquired. In addition, it cannot be updated until the next When the manner mode is set or the battery icon does not indicate distribution date. "/{, a confirmation screen appears to select whether to play or not when playback resumes or during playback.
Page 369
7Playback To adjust volume (volume 0 to 10) To play previous chapter/To return to During playback While fast forward beginning of chapter While paused While fast rewind q (for 1+ seconds) To fast rewind While stopped To play next chapter 8Play time/Total time r (for 1+ seconds) To fast forward...
Page 370
■ Programs with Time link distribution applied Checking program chapter list <Chapter list> Play the program with Time link distribution applied during the Display the Chapter list of the program to check the title, artist’s name specified hours. It cannot be played depending on the hours. It is and playback time of each chapter.
Checking program information Deleting program <Program info> <Delete> In the Music&Video Channel menu/program list In the Music&Video Channel menu, select a screen, select a program/C/[Program info]. program/C/[Delete]/[Yes]. In the Music&Video Channel player screen: Press Note [Program info]. Program setting cannot be deleted even if disabling programs. Saving program <Move program>...
Changing program title <Edit title> MUSIC Player In the program list screen, select a program/C/ [Edit title]/[Direct input]. The music data that can be played back and maximum playback time are as follows. Edit the title/t. Enter up to 253 single-byte (126 double-byte) characters. Maximum Music data File...
Saving music data When a microSD Card to which WMA files are saved by devices other than FOMA SH906i is used, a PC may not recognize it even if ® Downloading Chaku-uta full the MTP mode is set.
2008) “MMF0001” and “MMF9999” in single-byte excluding the file extension. Note 2. Copy to the \PRIVATE\DOCOMO\MMFILE folder in the WMA file transfer playlist microSD Card. Up to 59 single/double-byte characters appear as a playlist name For details on folder structure in the microSD Card on the FOMA terminal.
■ Types and icons of music data Music data types Viewing folder and screen of MUSIC Chaku-uta full ® with Player ® Chaku-uta full User Transfer replay restrictions playlist playlist Phone microSD Phone microSD Folder configuration of MUSIC Player The configuration of the [MUSIC] folder in Data box is as follows. Playlist User playlist Uta-hodai...
Page 376
When original is selected Related Operations Sound Space Change the display method for the music data list screen in Chaku-uta full ® and the [Multimedia] folder Natural Bass <Switch view mode> Sound Level Cnt In the music data list screen, press C/[Display settings]/ Mono-to-Stereo [Switch view mode]/select the display method/t.
* For Chaku-uta full ® in the FOMA terminal handset, up to 253 ■ Playing a playlist single-byte (126 double-byte) characters are available for the title In the Custom menu, select [Data box]/[MUSIC]/ ® and artist’s name. For Chaku-uta full in the microSD Card, up to 63 [Playlist].
Page 378
The expiration date of some Uta-hodai may have an extra replay Music data with replay restrictions period for a few days even after the replay period has expired. Some music data may have replay restrictions such as the limitation of During this period, files can be played back without updating the number of replays, expiration date, or replay period.
■ Editing title <Edit title> Confirmation screens for the update of the expiration date /C/[Edit title]/[Direct ® Select Chaku-uta full input]. To return to the original title: Press C/[Edit title]/[Back to original]. Edit the title/t. Enter up to 50 single-byte (25 double-byte) characters. ■...
Page 380
Select the transfer method. Up to ten User playlists can be created. Register up to 99 music data per playlist. Select [Move one]/[Yes]. Up to 100 Transfer playlists can be viewed. View 500 music data Select [Move selected]/select Chaku-uta full ®...
Delete music data in a playlist Note (Related operations) <Delete> In the User playlist screen, select a playlist/t/ Deleting music data saved in a playlist select music data/C/[Delete]. The original music data are not deleted even if music data is Select the deletion method.
Viewing properties of music data Deleting all WMA files collectively <File property> <Del all> Select music data/C/[File property]. Delete WMA files and transfer playlist saved in the [WMA] folder (nP. 373) on the microSD Card collectively. Editing Chaku-uta full ® information <Edit info>...
Convenient Functions Checking settings for various functions ..<Check settings>382 Displaying the call duration/charge ... <Talk time/cost>397 Multiaccess ....... <Multiaccess>382 Using as calculator .
Page 384
Check settings Multi Assistant (Multitask) Checking settings for various Using Multi Assistant (Multitask) functions Use Multi Assistant (Multitask) to use multiple functions simultaneously. In the Custom menu, select [Settings]/[General Four or more functions may be used simultaneously when a call settings]/[Check status]/[Check settings].
Page 385
Select the [Auto power ON] field/t/[ON]. Switching between active functions To disable the setting: Select [OFF]/i. While multiple functions are in use, press $. Select the [Time] field/t/enter a time (24-hour Select a function/t. format)/t. Select the [Alarm settings] field/t/[ON]. Note To disable the alarm: Select [OFF]/i.
Page 386
The confirmation screen does not appear in the following cases. Turning the handset on at the alarm time and Upon the end of the call or the operation, the previously displayed sounding alarm <Link alarm/power ON> screen or the stand-by display is returned, after which the confirmation screen appears.
Select [Alarm volume]/adjust the volume with Alarm u/t. Sounding alarm at set time Select [Snooze setting]/[ON]/enter the interval/ Activate the alarm, LED, or vibrator at the set time/day of t/enter the number of times to ring alarm/t. week. Set the alarm’s interval and the number of times to ring the alarm. Save up to nine alarms.
Page 388
Note Related Operations The alarm is not activated when the set time arrives in the Set alarm from stand-by <Quick alarm> following cases. Upon the end of the call or the operation, the In stand-by, enter a time (four digits: 24-hour format)/ previously displayed screen or the stand-by display is returned, t/[Quick alarm].
■ Specifying date <Go to date> Disabling/Deleting/Changing alarm settings In the Calendar screen, press C/[Show]/[Go to Set (Change)/Disable/Delete alarm settings individually. Details are date]. erased when alarm is deleted. Details are retained when disabled. To use the same details, set again. Enter a date/t.
Page 390
■ Calendar screen layout Select the repeat method/t. For [Once only]: Select [Once only]/proceed to step 5. If an end date and time are set, other than [Once only] cannot be selected. Enter the number of times to repeat/t. 00 represents unlimited times. Select [Smry]/enter a summary/t.
Note (Related operations) Note Saving category icons Contacts are not available while Keypad dial lock is set. The following content is saved into a schedule. Set secret Date/Time: Day to which cursor is position + Time at which A secret-saved schedule can only be read when secret mode operation was performed (nP.
Page 392
Pictures and videos are displayed on the alarm screen with the Setting alarms following priority. Sound an alarm before the scheduled start time. Priority (high b low) For details on setting the vibrator nP. 111 i-motion set as alarm tone b schedule image b Image In the schedule save screen, select [Alarm]/[ON].
Saving/Disabling national holidays <Set holiday> Save up to 20 holidays in addition to the preset Japanese national holidays. Set holiday appears red. In the Custom menu, select [LifeKit]/[Schedule]. Select a date with w/C/[Set]/[Set holiday]. Schedule list screen 1Date When disabling a national holiday, the date does not have to be selected.
Page 394
Editing a schedule Related Operations <Edit> Display by category <Show by category> In the Custom menu, select [LifeKit]/[Schedule]. In the Calendar screen, press C/[Show]/[Show by Select a date with w/t. category]/select a category/t. Select a schedule/C/[Edit]. Display by contact <Show by contact> In the Calendar screen, press C/[Show]/[Show by Edit the schedule/i.
Page 395
Shortcut menu Running shortcut menu Accessing functions quickly If a calendar is shown, press H to hide the calendar. In stand-by, press o. Save frequently used functions as shortcuts for easy access. Select a shortcut icon/t. The function saved to this position is executed from stand-by by pressing 1 to Deleting from shortcut menu 3 (for 1+ seconds).
Page 396
■ Searching using registered e-dictionaries as Quick search internal dictionary Searching by various methods In the Custom menu, select [Media tool]/[Quick search]. Use e-dictionary, i-appli “Internet dictionary”, search In stand-by: Press p. engines and others. • If a calendar is shown, press H to hide the calendar. Select [Internal Dictionary]/input a search string.
Use Quick search in the text input screen Icon Save item Enter hiragana and press i/search in the dictionary. Department (up to 60 single-byte (30 double-byte) characters) Set i-appli dictionary to start from the i-appli software Title (up to 40 single-byte (20 double-byte) characters) list screen <Reg i-appli dict>...
Recording the other party’s voice during a call Related Operations Copy the saved details of owner information <Copy item> <Voice memo> In the owner information details screen, select an item During a voice call, press C/[Voice memo]. with v/C/[Copy]/[Copy item]. Alternatively, press 7 (for 1+ seconds).
Page 399
Transmission duration and charge for PushTalk, i-mode and Talk time/cost packet transmissions are not counted. Refer to the “Mobile Phone Displaying the call duration/charge User’s Guide [i-mode] FOMA version” for details on checking the i-mode charge, etc. Check previous or total call duration/charge for voice calls, If the previous call duration exceeds 9:59:59, the counter restarts Videophone calls, etc.
Setting call cost limit notice Related Operations <Limit settings> Delete Limit settings message in stand-by Show a stock icon or sound an alarm in stand-by when the set In stand-by, press t/select the stock icon 4 (charge maximum call cost is exceeded after a call is ended. Also, reset total limit exceeded)/t/enter the terminal security code/ call cost on the first of the month.
Page 401
Numbers after the decimal point are left off when calculating Date created Last edit date consumption tax. Category Related Operations Text Change tax rate In the calculator screen, press s (for 1+ Select a function to use/t/use each function. seconds)/ enter tax rate (01 to 99)/t.
Do not press the switch repeatedly. Calls may be placed and Related Operations received automatically. Apply Function lock to the Text memo <Function lock> Do not wind the cord of the flat-plug earphone/microphone with In the text memo list screen, press C/[Function lock]/ switch around the FOMA terminal.
Page 403
■ Making a call to a memory number specified for Set the location to which the received call is output (nP. 112). headset switch to call Press the switch for 2+ seconds to finish call. In stand-by, press the switch for 2+ seconds. Note When the screen is off due to the screen display time, press a Calls may be answered accidentally if the earphone/microphone...
If both Voice Mail Service and Auto answer are enabled, and the What can be performed using Bluetooth same number of seconds is set for both services, then Voice Mail connection Service takes priority. To prioritize Auto answer setting, set a shorter ring time than that set for the Voice Mail Service (this also The following services are available with the FOMA terminal.
Note *4 The tone does not sound for i-motion play back while being retrieved from site. The following sounds are output from the Bluetooth device or the *5 The mail ring tone does not sound when a screen other than FOMA terminal depending on the connected service.
Page 406
C: Can be connected simultaneously but cannot be used Wireless connection is available with Bluetooth device put in a simultaneously. Switch functions with Multi Assistant to use. bag or pocket. However, lowering of communication speed or B: Cannot be connected. noise may result when the Bluetooth device and the FOMA terminal are separated by your body.
Page 407
Note Already registered and connected device that has been & found When ten Bluetooth devices are already registered, the confirmation screen for overwriting appears. When [Yes] is Already registered and connected device that is set to default connection device selected, the Bluetooth devices are overwritten starting with the oldest communication date and time.
Page 408
Note Switching to the registration stand-by/connection If a Bluetooth device is turned off during the connection or stand-by <Accept Registered> disconnection processing or there is no response from the Switch to receive a registration request/connection request from other Bluetooth device, it takes up to approximately 20 seconds for the Bluetooth devices in stand-by display.
Page 409
■ When accepting a connection request from the Using Bluetooth devices registered Bluetooth device For operations from a Bluetooth device, refer to the manual for the Automatically connect and L becomes flashing at approximately Bluetooth device. 0.5-second intervals. ■ Making a call using Bluetooth devices Turning off the Bluetooth power on the FOMA Connect a Bluetooth device using Headset service terminal...
Page 410
■ Playing back audio and music of 1Seg and MUSIC Automatically connect to a Bluetooth device when each Player using Bluetooth devices function is activated <Startup auto cnnct> Connect a Bluetooth device using Audio service. While 1Seg, video player, etc. is being activated, press C/[Bluetooth output]/[Startup auto cnnct]/select Activate and watch/play 1Seg, MUSIC Player, etc.
Page 411
In the text input screen, input text from keyboard. *3 Press in the text input screen to insert [K] (line breaks). Input method is automatically set to [Romaji method] and Quick Note conversion and Direct conversion are set to [OFF]. Some keys, such as numeric keypad, cannot be inputted.
Page 412
If Session number setting is set to [ON], the terminal security code ■ Receiving all data items <Receive Bluetooth> and authentication password entry are required to send all data. In the Custom menu, select [LifeKit]/ Authentication password is a password exclusively for Bluetooth. [Bluetooth]/[Receive Bluetooth]/[Yes].
■ Setting whether to perform the Bluetooth ■ Setting whether to enter the authentication authentication password <Set Authentications> <Session no. setting> When sending all data via Bluetooth communication, set whether to In the Custom menu, select [LifeKit]/ enter the authentication password. [Bluetooth]/[Bluetooth setting]/[Set In the Custom menu, select [LifeKit]/[Bluetooth]/...
Note Delete user data Deleting all saved data The following are not reset (deleted/changed). Refer to the respective pages to reset. Recordings such as Record message (nP. 79) Delete all saved data and return all functions to default Phonebook entries (nP. 104) settings.
Note Data returning Settings that can be reset (nP. 411), Set screen, to default Ring tone, Record message reply message, Other functions are not available while collectively deleting data. settings Phrases, Memory term item, Settings, Terminal Receiving voice call/Videophone call/mail, as well as alarms and security code, Date settings, Custom menu, Basic 1Seg reservation recording are also not available while deleting.
Page 416
Deleting secret data collectively <Del secret data> Delete secret phonebooks and schedule collectively. In the Custom menu, select [Settings]/ [Security]/[Delete all data]/[Del secret data]. Enter the terminal security code/t/[Yes].
2-touch input method text entry ....<2-touch>424 Refer to “Kuten Code List” in PDF format in the accompanying CD-ROM or in DoCoMo website for details on “Kuten Code List”. Adobe ®...
Input 5-touch Inputting text 5-touch input method text entry Input text for various functions on the FOMA terminal, such Switching input modes (5-touch input) as phonebook and mail. Switch input modes to enter various types of text. Connect commercially available Bluetooth compatible keyboard In the text input screen, press a.
Page 419
Perform one of the following to select input modes of the switch Select 電話/t. input mode palette. Dial key (1 to 9) Note • The order of the switch input mode palette corresponds to the In the mode other than the Kanji/Hiragana input mode, the conversion keypad layout.
Page 420
■ Converting multiple hiragana by one-touch key Note (Related operations) operation <One-touch Conv> Entering a space From all the hiragana combinations assigned to each key, conversion A single-byte space will be entered regardless of the input candidates appear. mode. Each space is counted as one character. One-touch conversion works best with nouns.
Page 421
■ Deleting characters collectively Note In the text input screen, press c (for 1+ seconds). Predictive headword conversion In One-touch conversion, words that start with the characters When characters are after the cursor, all characters on and after assigned to the pressed key (words starting with あ, い, う, え, お the cursor are deleted.
Page 422
For PictographD (Deco-mail pictographs), only Deco-mail Save phrase pictographs saved in the [Decomail pict] folder in My picture of Editing/Saving phrases Data box appear in the conversion candidates field. The ten pictographs or symbols used most recently appear on the Register frequently used original phrases and edit preset first line of the list.
Page 423
Copy text Pasting text Cutting/Copying/Pasting text In the text input screen, press C/[Paste]. Cut and copy up to 10,000 single-byte (5,000 double-byte) Move the cursor to the paste location/t. characters at once. Alternatively, press * (for 1+ seconds) in the text input screen to paste.
Page 424
Register words (User dictionary) Deleting registered words Registering frequently used words In the Custom menu, select [Settings]/[General settings]/[Text input setting]/[User dictionary]. Register up to 250 frequently used words with a short keyword. When a keyword is entered, the registered word Select a word/C/[Delete]/[Yes].
Page 425
Setting/Clearing a dictionary Replacing the User dictionary with a download dictionary <Dwld dictionary> In the Custom menu, select [Settings]/[General settings]/[Text input setting]/[Dwnld dictionary]. Replace the User dictionary with a download dictionary. In the text input screen: Press C/[Chara entry/dict]/[Dwnld In the Custom menu, select [Settings]/[General dictionary]/select a dictionary t (repeatable).
Page 426
Guess conversion 2-touch Selecting the conversion method 2-touch input method text entry Set to enable/disable Quick conversion and Guess Setting 2-touch input conversion. In the text input screen, press C/[Chara entry/ In the text input screen, press C/[Chara entry/ dict]/[Input method]/[2-touch]. dict]/[Guess conversion]/[Quick conversion]/ [Guess conversion].
Network services are not available outside the service area or in a place with no signal. “OFFICEED” is a service that requires subscription. Refer to the DoCoMo website for corporations (http://www.docomo.biz/d/212/) for further information. Add services to the menu when new network services become available from DoCoMo (nP. 440).
When a call is connected to Voice Mail Service with Chara-den, Voice Mail Service the DTMF operations become unavailable. Switch the DTMF Using Voice Mail Service mode to [ON] from the Submenu (nP. 67). When the 2in1 mode is set to [Dual mode], select [Number A] or Voice Mail Service is a service for answering incoming voice/ [Number B] to activate/deactivate Voice Mail Service, play Videophone calls with Replay message and recording...
Page 429
Playing back messages Using the service While a stock icon appears, select the stock icon to play back In the Custom menu, select [Settings]/[NW messages. Services]/[Voice Mail]. Number that appears is the number of new messages notified by guidance when playing back. Saved messages are not included. Select the service.
Call Waiting Answering a voice call during a call Using Call Waiting Place the current call on hold and answer a voice call. When a beeping tone is heard during a call, press Call Waiting is a service for placing the current call on hold and answer a new incoming call when the handset beeps during a call to notify you of another call.
Setting Call Forwarding Service from the FOMA terminal is not Call Forwarding Service available from outside the service area. In such cases, access Call Using Call Forwarding Service Forwarding Service from touch-tone landline phones and payphones using network security code. Remote control must be Call Forwarding Service is a service for forwarding voice/ set to “Activate”...
Checking the Call Forwarding Service settings Using the service When the 2in1 mode is set to [Dual mode] or [B mode], select In the Custom menu, select [Settings]/[NW which settings of [Number A] or [Number B] to check. Services]/[Call forwarding]. Setting Call Forwarding guidance Select the service.
Page 433
■ Responses when other services are active Using the service The following actions are taken when Caller ID Request Service is set In the Custom menu, select [Settings]/[NW to “Activate” along with the various services. Services]/[Bar nuisance calls]. Service Response Select the service.
Dual Network Service Using the service Using Dual Network Service In the Custom menu, select [Settings]/[Other NW Services]/[Dual network]. A mova terminal is available with a phone number registered for the FOMA terminal. FOMA and mova can be switched Select the service. depending on the service area.
Using the service Arrival Call Act Selecting actions for incoming calls In the Custom menu, select [Settings]/[Other NW during a call Services]/[English guidance]. Select the service. Select actions for voice calls received during a voice call if “Voice Mail Service”, “Call Forwarding Service”, or “Call Select [Guidance setting]/select the guidance type/t/ Waiting”...
Set “Voice Mail Service” or “Call Forwarding Service” used Multi Number is displayed and dialed. remotely from touch-tone landline phones, payphones and DoCoMo mobile phones. The registered name appears in the Multi Number selection screen when calling or the incoming call screen.
Page 437
Select the service. 2in1 Select [Set multi number]/select a phone number to use/ Using 2in1 t/[Yes]. • Set a phone number to use. 2in1 is a service that two phone numbers and two mail Select [Check setting]. addresses can be used on one mobile phone with dedicated Select [Number setting]/[Additional No1]/[Additional mode function as if two different mobile phones are used.
Page 438
Select the setting to register/t. Switching modes <Mode switching> If [B] is set to a phone number saved in the PushTalk phonebook, a In the Custom menu, select [Settings]/[NW message stating that PushTalk transmission cannot be sent appears. Services]/[2in1 setting]. Note In stand-by: Press 8 (for 1+ seconds).
Page 439
In the Custom menu, select [Settings]/[NW Note Services]/[2in1 setting]. When a change for the Number B of 2in1 or a FOMA card exchange (2in1 subscriber b 2in1 subscriber) is performed, use Enter the terminal security code/t/[Set call/ any of the following methods to obtain the correct Number B. receive No.]/[Disp.
Using functions in each mode The following functions operate differently depending on the mode used (Functions that operate in the same way as the A mode are excluded). Service A mode B mode Dual mode Voice/ Making a call Number A Number B Selectable when making a call Videophone...
Service A mode B mode Dual mode Mail/SMS Receive Receives mail that is addressed to Receives mail that is addressed to Receives mail that is addressed to Address A/SMS that is addressed Address A/SMS that is addressed to Address A/SMS that is addressed to Number A (The terminal rings).
Page 442
Using additional services Changing the receive display for saved service <Reply message> Save and use new DoCoMo network services when they are added. In the Custom menu, select [Settings]/[Other NW Save these new service special numbers or codes on the FOMA Services]/[Additional service]/[Reply message].
Page 443
CD-ROM ..........446 DoCoMo keitai datalink ....... . . 446 Refer to “Manual for PC Connection”...
Card (nP. 332) sigmarionⅡ before using. DoCoMo keitai datalink (nP. 446) Refer to the DoCoMo website for details on how to update. The FOMA terminal is not compatible with Remote Wakeup. ■ Packet transmission Unable to use 64K data communication by connecting a PC, etc. overseas.
Page 445
Internet service provider or host network administrator for more points that are compatible with FOMA 64K data communication, such information. as the DoCoMo Internet communication services “mopera U” and “mopera”, or a synchronous ISDN 64K access point. ■ Packet transmission and 64K data communication...
The operation in an upgraded OS cannot be guaranteed. Depending on the operating environment, the use of the software Before use may not be possible. DoCoMo holds no responsibility for responding to inquiries or guaranteeing operation in environments other than those specified above.
CD-ROM Download and install from the Preparing Bluetooth connection DoCoMo website Make data communication by connecting the FOMA terminal Connect the FOMA terminal to your PC wirelessly to a Bluetooth communication compatible PC. using FOMA USB Cable with Charge For details on Bluetooth connection nP.
FOMA terminal and the manuals (in PDF format) such as “Manual for PC Use the DoCoMo keitai datalink software to back up the data Connection” and “Kuten Code List”. Refer to the such as “phonebook” and “mail” from the user’s mobile accompanying CD-ROM for details.
Outline of international roaming calls (nP. 68) or setting International dial assist (nP. 68). (WORLD WING) For other country codes and details, refer to the DoCoMo “International Services website”. International roaming (WORLD WING) is a service that (As of April 2008) enables you, using overseas telecommunications carrier’s...
Some communication services are not available depending on the If subscribed to the FOMA service before August 31, 2005 but not network/carrier. Refer to the DoCoMo “International Services subscribed to “WORLD WING”, a subscription for “WORLD WING” website” for details.
Page 452
For the latest information of the international call access code and the international prefix number for the universal number, refer to the DoCoMo “International Services website”.
Page 453
Hong Kong Switzerland turned on after homecoming. Hungary Taiwan Reset the Network search mode to the FOMA network (DoCoMo). Ireland Thailand If the Network search mode is set to [Manual], switch to the FOMA network (DoCoMo) manually or change to [Auto].
Country code conversion. Note Example: Make a call from phonebook Refer to the DoCoMo “International Services website” for details In stand-by, press a/select the other party. on available countries, country codes and telecommunications Press s (Phone)/i (V.phone).
Making a call to a WORLD WING subscriber Having calls to your FOMA terminal overseas ■ Having calls made to your FOMA terminal from Japan When making a call to a “WORLD WING” subscriber overseas, make an international call to Japan regardless of your country of stay. To receive an international call from Japan, have your phone number dialed just as a domestic call in Japan.
Network search mode PLMN setting Setting a search method of Setting a telecommunications telecommunications carrier carrier to preferentially connect to Set to manually select a telecommunications carrier. Specify the priority order of telecommunications carriers Re-search a network to set another telecommunications carrier. connected to when the Network search mode is set to [Auto].
Page 457
Operator name disp Call barring Displaying a telecommunications Rejecting calls during roaming carrier while in roaming Set the FOMA terminal to reject calls during roaming. Select whether to bar all incoming calls or only the Videophone and Set whether to display a telecommunications carrier name 64K data transmission calls.
Page 458
Int’l services Using network services during roaming Use network services such as Voice Mail and Call Forwarding from overseas. Voice Mail and Call Forwarding subscription are required to use Voice Mail (Int.) and Call Forward (Int.). To use network services overseas, set Remote control (nP. 434) to “Activate”.
■ i-mode menu Menu list i-mode Function menu Default setting Page UiMenu – P. 170 Custom menu/Basic menu list VBookmark [Bookmark] folder P. 178 The menu item numbers correspond to the numbers on the keypad. WScreen Memo – P. 179 Press the corresponding key to select that menu.
Page 461
All enabled/ P. 187 Zi-motion auto replay Yes/ P. 191 [Secure setting Cert Operation: – P. 188 P. 190 DoCoMo CA Host: DoCoMo/ \Use phone info Yes/ P. 186 ]Sound effect Volume 5/ P. 172 Ti-mode arrival act PushTalk preferred/ P.
Page 462
P. 215 ON/, List display: Two RMail ticker setting Only notice/ P. 206 lines, Sort: SSMS setting Date(newbold)) USMS center XCompose message DoCoMo P. 227 – P. 196 VReport request YCompose Decome-Anime Do not request/ P. 228 – P. 200...
■ Settings menu Settings Those default settings that depend on the handset color and which Function menu Default setting Page can be set with the Kisekae Tools (nP. 119) are indicated by USnd/Vibrator/Manner [White], [Black], [Pink], or [Blue]. The title name of a Kisekae Tool VSelect sound appears when the Kisekae Tool settings are changed.
Page 464
Settings Settings Function menu Default setting Page Function menu Default setting Page USnd/Vibrator/Manner VDisp/LED/Power saver XManner mode USet screen UNormal UStand-by display – P. 113 待受画面1 (Handset color: White), 待受画面2 (Handset VSilent – P. 113 color: Black), 待受画面3 P. 114 WOriginal Record message, Vibrator, (Handset color: Pink), 待受...
Page 465
Settings Settings Function menu Default setting Page Function menu Default setting Page VDisp/LED/Power saver VDisp/LED/Power saver WThemes WThemes Picture call set: ON/ VCall/Rcv display XSubmenu image メニュー枠1(上)/(下) (Handset Outgoing voice calls, V-phone color: White), メニュー枠2(上)/ sending scrn: 電話発信1 (下) (Handset color: Black), メ P.
Page 466
Settings Settings Function menu Default setting Page Function menu Default setting Page VDisp/LED/Power saver VDisp/LED/Power saver WThemes YDisplay img quality \Color theme setting UVibrant image mode MilkWhite (Handset color: Stand-by, Data Box(Music&V White), OrbBlack (Handset color: ch), Data Box(i-motion), Black), RipplePink (Handset P.
Page 467
Settings Settings Function menu Default setting Page Function menu Default setting Page VDisp/LED/Power saver WGeneral settings [VeilView [USB mode setting Communication mode/ P. 342 UDis temp in stdby \Scanning function P. 126 VPattern UUpdate Docomodake/ P. 126 – P. 510 \Menu priority VSet auto-update Custom menu/...
Page 468
Settings Settings Function menu Default setting Page Function menu Default setting Page XNW Services XNW Services VCall waiting [Talk time/cost Limit settings: Disable/ (Notice method: Alarm + UActivate – P. 428 P. 397 stand-by, Auto reset: OFF VDeactivate – P. 428 when set to Enable) WCheck setting –...
Page 469
Settings Settings Function menu Default setting Page Function menu Default setting Page XNW Services YOther NW Services ]In-call arrival act ZMulti number USet arrival act USet multi number – P. 435 UActivate VCheck setting – P. 434 – P. 435 VDeactivate WNumber setting –...
Page 470
Settings Settings Function menu Default setting Page Function menu Default setting Page ZPhone settings ZPhone settings \Self mode XVideophone set OFF/ P. 134 ]Other settings URedial voice call OFF/ P. 83 UInt’l prefix VSet sending image Substitute image: キャラ First entry: 009130-010/ P.
Page 471
Settings Settings Function menu Default setting Page Function menu Default setting Page ZPhone settings [Security ]Other settings ZLock settings XInternational Roam. UAll lock Disabled P. 132 [Roam. VKeypad dial lock OFF/ P. 136 – P. 456 guidance(Int.) WFunction lock OFF/ P.
Page 472
LifeKit LifeKit Function menu Default setting Page Function menu Default setting Page WmicroSD manager \Timer/Alarm YFormat UTimer – P. 342 3 minutes P. 384 ZUSB mode setting VAlarm Communication mode/ P. 342 Set repeat: Once only Alarm tone: 着信音1 XBluetooth Alarm volume: Volume5 P.
Page 473
■ 1Seg menu LifeKit Function menu Default setting Page 1Seg SGPS menu Function Default setting Page menu ZLoc. request menu Loc. prov. ON/OFF: Loc. provision:OFF/ UActivate Display settings (Display mode (L): Positioning mode: Standard P. 273 1Seg Video+data, Display mode (W): Vid mode/ (full-screen), Mark display (W): Full-time Host setting: Default/...
Page 474
■ Camera menu 1Seg Function Camera Default setting Page menu Function Default setting Page XReserve rec menu – P. 296 hist UShoot still Full-screen mode: OFF YTVlink – P. 298 Shooting menu (Picture light: OFF, AF mode: Def (people first), Image quality: NORMAL, ZChannel –...
■ Phonebook menu Data box Function Phonebook Default setting Page menu Function Default setting Page VMUSIC Music data list in Chaku-uta full ® menu Display settings (Switch view mode: Phonebook Search by: Reading? 12-part, Sort: Date (newb old))/ Switch view mode: Show business card <MUSIC Player>...
Page 476
Data box Data box Function Function Default setting Page Default setting Page menu menu Xi-motion Y1Seg Folder list Video list Manage folders (Folder security: OFF) 1Seg data settings (Switch view mode: Continuous play (Repeat playback: No, 12-part, Sort: Date (newbold))/ Sample playback: No)/ <Video player>...
Page 477
■ Media tool menu Data box Function Media tool Default setting Page menu Function Default setting Page Folder list menu Documents Manage folders (Folder security: OFF) UManga&Book File list My Documents list P. 356 Reader Sort (e-comic only): Date (newbold)/ My documents set (Sort: Date (newb Backlight time: As light setting/ old))/...
Page 478
Touch menu list Other functions Function Function Displayed screen Page Default setting Page menu menu Full Browser Earpiece P. 73 Volume 5 volume P. 110 Home View an Internet web page that is set as a P. 302 Home Videophone Change send img: キャラ(女性) Brightness (when sending a camera image): Bookmark...
Page 479
Dial key assignments (5-touch) Use dial keys to input text. Each key has multiple characters assigned to it. ■ Double-byte characters ■ Single-byte characters Double-byte Single-byte alphanumeric input mode alphanumeric input mode Kanji Double-byte Kuten Single-byte Single-byte (hiragana) katakana code katakana numeric Upper and...
Page 480
Dial key assignments (2-touch) Symbols/Special character list ■ Double-byte symbols/Special characters ■ Double-byte ■ Single-byte Upper case mode Upper case mode * Press 8 0 to switch between upper case mode and lower case mode. , characters can be entered in lower case when in lower case mode.
Multiaccess combinations The following are the main combinations of transmission functions that can operate simultaneously. Transmission Voice call Videophone i-mode mail Data trans. (packet) Data trans. (64K) PushTalk PushTalkPlus Positioning Current i-mode 1Seg type location Make Receive Make Receive Send Receive Send Receive Send Receive Send Receive Make Receive Network connection transmission Phone Videophone...
Page 484
Multi Assistant (Multitask) combinations The following are the main combinations of functions operable simultaneously. Additional function Current function Custom menu, Basic menu A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B A B B B A B B B B B A A i-appli...
Page 485
Additional function Current function A A A A A A A A A A A A B A A A A A B A A A A A A ToruCa A A A A A A A A A A A A A A B A A A B A B A A A A Full Browser A A A A A A A A A A A A A A...
Page 486
Services such as 116 (NTT sales counter), Dial Q2, message service and credit card calls are not available (Automatic credit Services available from the FOMA card calls to a FOMA terminal can be made from a landline terminal telephone or payphone). This FOMA terminal supports “Location notification of emergency Services available from the FOMA call”.
Some products may not be available in certain areas. Using with external devices Contact a DoCoMo Shop or retailer for details. Refer to the user’s guide of each product for more details. Using supported external devices, play back movies saved...
About movie player software Problem Explanation Page Does not Is the battery pack inserted properly? P. 50 QuickTime™ Player (Free) ver. 6.4 or later (or ver. 6.3+3GPP) provided recharge Is the temperature of the FOMA terminal P. 51 by Apple Computer, Inc. is required to play back movies on a PC. or battery high? QuickTime™...
Page 489
Problem Explanation Page Problem Explanation Page Busy signal Was 090, 080, 070 or the area code P. 61 When a call When a call or mail is received from the P. 101 sounds after dialed? or mail is other party for which group called LED/ Does A appear? dialing P.
Page 490
Problem Explanation Page [Already downloaded] Total calls Total calls cost for FOMA card does not P. 397 The same version of the software has been already downloaded. nP. 247 cost does not increase when maximum limit increase (approximately 16,770,000 yen) has been [An attached file will be deleted] reached.
Page 491
[B number dialing is not available when using abroad. A number [Capacity exceeded. Some data may be lost. End editing?] dialing will be performed] Appears when message text alone exceeds 10,000 bytes. Select Appears if calling is attempted with Number B when the 2in1 is [Yes] to open the compose message screen.
Page 492
(During Ir exchange or Bluetooth communication) [Connection [Copyright information is incorrect. Delete all from the WMA suspended] folder] [No response. Retry?] Appears when WMA files in microSD Card that have been played [Authentication failed. Retry?] back with a FOMA terminal is attempted to be played back with other FOMA terminals.
Page 493
FOMA terminal owner will be asked to bring FOMA terminal and [Disable accept calls] identification (a driver’s license, etc.) to a DoCoMo Shop in the Accept calls is set. case of a forgotten network security code. nP. 128 Disable and try again.
Page 494
[Function is already running End and restart?] [Invalid data. Connection cannot be established (400)] Appears when a function that is already running is selected. Quit Connection cannot be established due to errors in sites/Internet web pages. Check whether the URL is correct. nP. 174 the function and run again or switch to the screen for the running function.
Page 495
[May be unable to fully acquire all data. Acquire data?] [Memory low. Could not record] Appears when downloading Standard type i-motion with unknown Appears when 1Seg programs cannot be recorded with insufficient file size. nP. 190 space of the FOMA terminal handset or the microSD Card. [Memory is almost full] [Memory low.
Page 496
[No more space Overwrite?] [Out of service area] Appears when screen memo memory is full. Select [Yes] and Appears when making a Videophone call or network service such select a screen memo to overwrite. Proceed to the save as i-mode, etc. is attempted but handset is outside the service confirmation screen.
Page 497
PUK is blocked. web page, Message R/F, i-mode mail, or Ir exchange function, and Contact a DoCoMo Shop. nP. 129 the specified software could not be started. nP. 245 Appears when an attempt is made to start a mail-type i-appli when [Receiving data exceeds maximum size for i-motion] the 2in1 mode is set to [B mode].
Page 498
Receiving is suspended and data received up to suspension is displayed. nP. 177 identification (a driver’s license, etc.) to a DoCoMo Shop in the case of a forgotten terminal security code. nP. 128 Appears when maximum data size is exceeded while loading a melody or a downloaded dictionary.
Page 499
[SSL session failed] [This data cannot be replayed. Delete?] [This data cannot be viewed. Delete?] Appears when an error occurs during SSL authentication and the SSL session is disconnected. nP. 171 ® Appears when attempting to play/display i-motion, Chaku-uta full or an e-comic with replay/view restrictions after resetting the time [SSL session was terminated] setting.
Page 500
Appears when there are files or folders on the microSD Card that [Too much data was entered] were created on a PC or a handset other than the FOMA SH906i. Data could not be sent because character string or URL entered in [Unable to Format] text box or other input field was too long.
Page 501
[(IPs (Information Providers)) Unable to play data. This service [Unable to retrieve the requested URL (504)] needs to be signed up. Connect to site?] Site or Internet web page connection failed for an unspecified reason. Try again later. nP. 170 Appears when the service offered by the IP (Information Provider) is not subscribed to while expired Uta-hodai is updated.
Page 502
[Unable to use this function] [URL has been changed. Connect to site?] Appears if composing i-mode mail is attempted from a phonebook Appears when the URL is changed while expired Uta-hodai is when the 2in1 mode is set to [B mode]. nP. 435 updated.
Page 503
Service (a paid service that requires subscription). ※ If you own a PC, you can transfer and store registered information such as phonebook entries using DoCoMo keitai datalink (nP. 446) and the FOMA USB Cable with Charge Function 01/02 (sold separately) or the FOMA USB Cable (sold separately).
Page 504
• Stickers are applied to the LCD or keys. Repairs for damages caused by the use of devices and accessories • Decorations are made to the FOMA terminal with adhesive other than those specified by DoCoMo will also incur a fee, even agent. during the warranty period.
Page 505
FOMA terminal. DoCoMo shall not • Access from abroad is charged. QR code to be liable for any modification or deletion of content. DoCoMo may, The test items differ depending on the FOMA terminal connect to...
Reserve : Software updates automatically on set date and time. During software update, the handset makes an SSL connection with the server (DoCoMo site). Set the SSL certificate to valid (The Note default setting is [Enable] nP. 187). Do not remove the battery pack while the software is updating.
Page 507
Updating software automatically <Set auto-update> (model, serial number, etc.) is automatically sent to the server (DoCoMo software update server). Sent information is only used for The new version of software is automatically downloaded, and the software update. software is updated on the time set in advance.
Page 508
If the notification icon appears in stand-by when software must The stock icon appears in the following cases. be updated: Select [only notification]/i. When a notification is received from DoCoMo on setting Select the [Day] field/t/select the day of auto-update to [only notification] week/t.
Page 509
For Reserve, [Establishing SSL session (Authenticating)] b (model, serial number, etc.) is automatically sent to the server [Negotiating] appears. (DoCoMo software update server). Sent information is only Upon the completion of download, [Ready to used for software update. rewrite?] appears/t.
Page 510
When power is turned on, software update starts Select the preferred date/time/t/[Yes]. automatically. Alternatively, select the date and time after selecting [Other date/time] and accessing the server. In the screen for selecting During update, all of the keys are disabled. It is not possible to times, the schedule status appears as [A:Avail] or [C:Limited] cancel update.
Page 511
FOMA terminal. Pattern definitions vary depending on the phone model. Therefore, Select the item. DoCoMo may discontinue offering pattern definitions for a particular To confirm: Select [OK]. model 3 years after the release date. To change: Select [Change]/select a preferred date (nP.
Page 512
When setting auto-update, information about the FOMA terminal Press t when updating is completed. (model, serial number, etc.) is automatically sent to the server (DoCoMo scan function server). Sent information is only used for Note pattern definition update. When updating pattern definitions, information about the FOMA Set auto-update may be interrupted if signal is weak.
Page 513
Displaying scanned results Displaying, activating, or calling is not available. Select When data that can cause malfunctions are detected, a warning [Yes] and select [Yes] in the screen appears. delete confirmation screen to Level 3 delete the data. Select [No] to ■...
Checking the version of the pattern definitions Main specifications <Version> ■ Package In the Custom menu, select [Settings]/[General settings]/ Product name FOMA SH906i [Scanning function]/[Version]. 112 (H) × 49 (W) × 18.6 (D) mm Size (when folded) Approx. 135 g (with battery pack Weight installed) Voice call: Approx.
Page 515
Continuous stand-by time is an estimate of the time when FOMA Number of still pictures Approx. 1,000 shots (when terminal is folded and in a status where signals are received. Talk/ recorded saved into the handset) stand-by time may be reduced by about half depending on Continuous shooting of 25 shots/9 shots/6 shots/4 shots conditions including battery level status, functions used,...
■ Battery pack Number of saved/registered/protected Product name Battery Pack SH17 Battery Lithium-ion entries in the FOMA terminal Nominal voltage 3.7 VDC Nominal capacity 800 mAh Number of Number of applicable applicable Data type entries to be entries to be saved/registered protected Phonebook...
Page 517
Specific Absorption Rate (SAR) Data type entries to be entries to be saved/registered protected This model phone FOMA SH906i meets the MIC’s technical i-appli – regulation for exposure to radio waves. Mail-type i-appli – The technical regulation established permitted levels of radio frequency...
Page 518
SHARP Corporation Hereby, Sharp Telecommunications of Europe Ltd, declares http://www.sharp.co.jp/products/menu/phone/cellular/sar/index.html that this FOMA SH906i is in compliance with the essential requirements and other relevant provisions of Directive * Ministry of Internal Affairs and Communications 1999/5/EC. A copy of the original declaration of conformity can be...
Page 519
The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The Export Control Regulations highest SAR value for this model handset when tested for use at the ear is 0.615 W/kg and when worn on the body, as described in this The Japan Export Control Regulations (“Foreign Exchange user guide, is 0.442 W/kg.
Page 521
Index/Quick Manual Index ..........520 Quick Manual.
Page 522
Index How to Use Index This index lists function names, words, and key words in alphanumeric order. If you cannot remember a function name, search with key words. <Example: When searching “Omakase Lock”> To search with function names To search with key words Lock function .
Page 523
Number B Ring tone ..437 Answering calls/Videophone calls Bluetooth information ..410 Phonebook 2in1 set ..436 .
Page 524
Call Waiting ....428 Shoot still picture ... 153 Change Chara-den ... 80 Shoot with frame .
Quick Manual How to use the Quick Manual Remove the Quick Manual attached to the end of this manual by cutting along the perforations and fold it as shown below. Carry the Quick Manual “Overseas Use” when the mobile phone is used with the International Roaming (WORLD WING) overseas. ■...
Page 537
(No prefix) (toll free) a : Company/school < : Select ring tone ※ Can only be called from DoCoMo mobile phones. q : Department V : Mail ring tone Please confirm the phone number before you dial. r : Title...
Page 538
Press p/[の]. Changing the font (font style) Camera Press 453/o/[テニス]. In the Custom menu, select [Settings]/[Disp/ Shooting still pictures Use o for One-touch conversion. LED/Power saver]/[Font style]/[Font style Press a (five times)/t/3. In stand-by, press C/t/t. setting]/select the font/t. Press a (five times) for single-byte alphanumeric ■...
Select [Mail members]/select a mail member/ Select [Phonebook]/select a save destination/ Receiving mail automatically t/select a name/t. Mail is automatically received. Select [Schedule]/select a save destination/ Select the [Sub] field/t/enter a subject/ t/(select a day/i) /select a schedule/t. Select [Mail]/select mail/t. t/[Msg]/enter the message text/t/i.
Page 540
WGeneral settings XNW Services XNW Services UCheck status UVoice Mail ]In-call arrival Owner Information, Check memory, Check messages, Play Messages, Set arrival act, Arrival Call Act Battery level, Check settings Activate VoiceMail, Set ring time, Deactivate VoiceMail, Check setting, VText input User dictionary, Dwnld dictionary, Edit YOther NW Services Voice Mail setting, Notification setting,...
Page 541
]UData box ]VLifeKit ]WMedia tool UMy picture UBar code reader UManga&BookReader VMUSIC VReceive Ir data VDocument Viewer WMusic&Video ch WmicroSD WPDF Viewer View microSD data, Backup/restore, manager Import, New manager info, Format, Xi-motion XVoice recorder USB mode setting Y1Seg YVoice memo/Rec msg XBluetooth Accept Registered, Receive Bluetooth, ZMelody...
Caller ID Request Service Icon list Signal status 2 " Battery level Subscription is not required (no monthly fees). 1 2 345 78 9 a b In the Custom menu, select [Settings]/[NW Charging 3 7=AABNO Services]/[Caller ID request]. i-mode/Full Browser Select [Activate].
Page 543
-81-3-6718-1414*(toll free) [Options]/[International Settings]/[i-mode of your country of stay (Table 1) <DoCoMo Information Center> (24-hour service) services Settings]/[Yes]/select the [Enter * Communication charges to Japan will apply when you make a call For DoCoMo mobile phones i-mode Password] field/t/enter the i-mode from a fixed-line telephone.
If Network search mode is set to [Auto], reset Network search code before making an international call. Making a call outside your country of stay mode to the FOMA network (DoCoMo) automatically when the The following operation is available overseas only. (including Japan) power is turned on after homecoming.
Page 545
In stand-by, press 0 (for 1+ seconds)/81/ Setting the roaming guidance Call barring enter the other party’s mobile phone number Make this setting while still in Japan Depending on the overseas telecommunications carrier, the excluding the first 0/s (Phone)/i (V.phone). ※...
Page 546
Sweden U.S.A. Sweden Vietnam Belgium India Switzerland Vietnam Switzerland Brazil 0021/ Indonesia 0014 Ireland ※ For other country codes and details, refer to the DoCoMo “International Services website”. Canada Italy China Luxemburg Czech Macau Denmark Malaysia Finland Monaco France Netherlands...
Page 547
※ You will need your “DoCoMo ID/Password” to access e-site from PC. ※ If you do not have or you have forgotten your “Network Security Code” or “DoCoMo ID/Password”, contact the number listed in General Inquiries on the back of this manual.
Refer to the DoCoMo website for details on how to For the packet transmission using mopera U, the data update. can be sent and received at speeds up to 384 kbps The FOMA terminal is not compatible with Remote and 3.6 Mbps respectively.
Internet service provider for more System requirements information about usage fees. FOMA communication Item setting file FirstPass PC Use the DoCoMo Internet connection services software FOMA PC setup “mopera U” and “mopera”. Subscription to software “mopera U” requires a charge. PC/AT compatible...
Depending on the operating environment, the use of For USB connection For Bluetooth connection the software may not be possible. DoCoMo holds no Download and install the Connect the FOMA responsibility for responding to inquiries or FOMA communication terminal wirelessly to...
Insert the PC side of the FOMA USB Note Cable with Charge Function 01/02 If installation fails and [FOMA SH906i] is not listed in into the PC USB connector (T). the screens of step 3 of “Confirming the installed FOMA communication setting file (Driver)” on P. 5,...
Page 554
Insert the accompanying CD-ROM For install FOMA byte counter, click into your PC. [インストールする (推奨)] (Install (recommended)). The initial screen appears. A set up screen appears, follow the instruction and install FOMA byte counter. Click [完了] (Finish) on the [InstallShield Wizardの完了] (InstallShield Wizard is completed) screen.
Page 555
Related Operations When [FOMA SH906i ドライバーの アンインストールを行います。] If installation fails or [FOMA SH906i] does not (Uninstall FOMA SH906i driver.) appear in the screen of step 3 appears, click [はい] (Yes). Uninstall the file, and then install it again. Refer to “Uninstalling the FOMA communication setting file...
Page 556
The [アプリケーションの追加と削除] (Add/ function Remove application) screen appears. To connect a PC to the FOMA terminal for the Select [FOMA SH906i USB] and first time, register the PC on the FOMA terminal. click [変更と削除] (Change/ Operate the PC and the FOMA terminal.
Connecting the FOMA terminal to the registered PC Communication settings with the FOMA PC setup software In the Custom menu on the FOMA terminal, select [Lifekit] b The explanations in the subsequent steps are based [Bluetooth] b [Accept Registered]. on the settings for Windows XP. The screens are L flashes at approximately 1-second intervals different for Windows Vista and Windows 2000.
Page 558
From installing the FOMA PC setup Click [データリンクソフト・各種設定 software to connecting to the Internet ソフト] (Data link software/Setting Check the operating environment of the FOMA software) b [インストール] (Install) PC setup software (nP. 2). in the [FOMA PC設定ソフト] (FOMA STEP 1 Install the FOMA PC setup software PC setup software) field.
Page 559
Read the licensing agreement and Confirm the program folder name click [はい] (Yes) to agree. and click [次へ] (Next). This is the user licensing agreement for the To change, enter a new folder name and click FOMA PC setup software. Clicking [いいえ] [次へ] (Next).
Page 560
Click here click [終了] (Exit). For Windows Vista Double-click [NTT DoCoMo FOMA PC 設定ソフ Right-click ト] (NTT DoCoMo FOMA PC setup software). For Windows 2000 Select [NTT DoCoMo FOMA PC 設定ソフト] Click (NTT DoCoMo FOMA PC setup software) and click [変更と削除] (Change/Remove).
Page 561
PC setup software) b [FOMA PC設定ソフト] For the provider, use mopera U or mopera, the (FOMA PC setup software). DoCoMo Internet connection service (The communication speed for both sending and receiving is up to 384 kbps for using mopera). Start the FOMA PC setup software and...
Page 562
Enter a name in the [接続名] (Connection Select [パケット通信 (HIGH-SPEED name) field. 対応端末)] (Packet transmission The following single-byte characters cannot be (HIGH-SPEED compatible terminal entered. ¥ / : * ? ! < > | ” and click [次へ] (Next). For Bluetooth connection, [モデム名] (Modem name) field becomes the [(in-use Bluetooth-linked standard modem)] or [(Bluetooth modem provided by a Bluetooth...
Page 563
Advanced settings (TCP/IP settings) Click [はい] (Yes). Click [詳細情報の設定] (Advanced) and the IP Address/Name server setting screen appears. To enter dial-up information, such as the Confirm the setting information and provider or corporate LAN, register the click [完了] (Finish). necessary addresses according to the The settings appear in a list.
Page 564
The following single-byte characters cannot be entered. ¥ / : * ? ! < > | ” Make sure that [FOMA SH906i] is set in [モデム の選択] (Select a modem) field. The transmission settings on the PC are For Bluetooth connection, select the [(in-use optimized for using FOMA packet transmission.
Page 565
To connect to a provider with an ISDN synchronous 64K access point, make the following settings when creating a dial-up setting. Connection name: Enter a connection name. Selected modem: FOMA SH906i Confirm the setting information and Phone number: Enter the phone number provided by the click [完了] (Finish).
Page 566
Note Confirm the setting information and click [完了] (Finish). When there is no connection icon on the desktop The settings appear in a list. Check that the <Windows XP> settings are correct. Click [スタート] (Start) menu b [すべてのプログラム] If [デスクトップにダイヤルアップのショート (All programs) b [アクセサリ] (Accessories) b [通信] カットを作成する] (Create dial-up shortcut on (Communications) b [ネットワーク接続] (Network...
Page 567
Enabling and disabling optimization Start the FOMA PC setup software and click [通信設定最適化] (Transmission setting optimization). Host (APN) settings Reading Host (APN) information from the FOMA terminal Click [接続先 (APN) 設定] (Host (APN) When optimizing the transmission settings) and setting in the task tray on the retrieve Click...
AT commands. Making host (APN) settings is not necessary when using mopera U or mopera, the DoCoMo Internet connection service, since it is set as the default. Set Notify caller ID as necessary (When using mopera U or mopera, set [Send]).
Page 569
Setting the host (APN) Select [FOMA SH906i] from [接続方 法] (Connection method), enter a Set the host (APN) for using packet transmission. temporary number in the [電話番号] Register up to ten numbers. Hosts are managed (Phone number) field that does not using cid numbers from 1 to 10 (nP.
Page 570
When nothing appears on the screen Setting Send/Not send caller ID when AT commands are entered Handset number (Caller ID) is important personal ATE1o information. Use caution when setting. Refer to P. 36 for details on AT commands. When resetting APN settings using Follow steps 1 to 5 of “Setting the AT commands host (APN)”...
Page 571
Setting a dial-up network on Windows XP Set [Send] for sending caller ID when using mopera U On Windows XP, use ネットワークの接続ウィ or mopera, the DoCoMo Internet connection service. ザード (Network connection wizard) to set both the host (APN) and TCP/IP protocol.
Page 572
The Internet account information screen For FOMA USB Cable with Charge Function appears. 01/02: Make sure that [FOMA SH906i] in [接 To connect to <cid>=3 (mopera U), enter 続の方法] (Connection method) shows E. When H appears instead, change to E. For “*99***3#”.
Page 573
ザード (Network connection wizard) to set the host (APN). Click [接続をセットアップします] Example: Using <cid>=3 to connect to mopera U, the DoCoMo Internet connection service (Set up a connection), and click [閉 Subscription to mopera U requires a charge. じる] (Close).
Page 574
(APN) and TCP/IP protocol. For FOMA USB Cable with Charge Function Example: Using <cid>=3 to connect to mopera U, 01/02: Make sure that [FOMA SH906i] in [接 続の方法] (Connection method) shows E. the DoCoMo Internet connection When H appears instead, change to E. For...
Page 575
ンターネットに接続します] (Connect through phone line and modem) and click [次へ] (Next). The screen to specify the modem appears. Confirm that [FOMA SH906i] is set in For TCP/IP settings used for connecting to an [インターネットへの接続に使うモデムを選 Internet service provider, confirm with the 択する] (Select modem to use to connect...
Page 576
When two or more modems are connected to the PC Example: Connecting to the dial-up network via For FOMA USB Cable with Charge Function 01/02: Make sure that [FOMA SH906i] in [接 FOMA USB Cable with Charge 続の方法] (Connection method) shows E.
Double-click the connection icon. Sending and receiving data ™ (OBEX communication) Sending/Receiving FOMA terminal data to/from a PC The FOMA terminal has OBEX ™ function as a data communication protocol. Connect the FOMA terminal The connection screen appears. to your PC via FOMA USB Cable with Charge Alternatively, select the host icon and then Function 01/02 (sold separately), and the data select [接続] (Connect) in the [ファイル] (File)
Page 578
Note Send data from a PC using data transfer software (Write 1). Mail with i-appli start up designations can be sent Refer to the software manual for details on after attached data has been deleted. sending data. Mail attachment data exceeding 100 KB (including the message text) are deleted and only message is Note sent.
Note AT command list Terminal mode enables a single PC to operate like a communication terminal. Characters entered from the keyboard are sent to the device or line connected AT commands to the communication port. AT commands are commands used to set the Switching between online data mode FOMA terminal functions from a PC.
Page 580
AT command list [M]: AT commands that can be used with the FOMA SH906i Modem Port. Execution AT command Overview Parameter/Explanation example The modem function of the FOMA terminal can be controlled by adding commands in the ― list to the end of this command.
Page 581
Execution AT command Overview Parameter/Explanation example AT*DGARL=<n> Adds or deletes from Reject calls list with <n> AT*DGARL=0,1o Sets host (APN) to reject [,<cid>] transmissions for incoming packet parameter. If <cid> parameter is abbreviated, communications. APN settings adds (<n>=0) or deletes (<n>=1) all of <cid> AT*DGARL?o use <cid>...
Page 582
Execution AT command Overview Parameter/Explanation example AT+CGDCONT Sets host (APN) accessed when Refer to “More on AT commands” (nP. 39). Refer to “More on establishing packet AT commands” transmission. (nP. 39). AT+CGEQMIN Registers criterion determining Refer to “More on AT commands” (nP. 40). Refer to “More on whether to permit QoS (Quality of AT commands”...
Page 583
Execution AT command Overview Parameter/Explanation example AT+CMEE=<n> Sets the manner to display FOMA Sets whether to display errors only as AT+CMEE=0o terminal error reports. “ERROR”, or to display reason with text or numerical value. AT+CNUMo <n> ERROR Displays “ERROR” and no result codes AT+CMEE=1o (default setting) Displays result codes with numerical...
Page 584
Execution AT command Overview Parameter/Explanation example AT+CPIN=<pin Enters the UIM password (PIN1, <pin> AT+CPIN?o >[,<newpin>] PIN2). Enters PIN1 while waiting for PIN1 input +CPIN:SIM PIN1 (Enter <pin> parameter only) Enters PIN2 while waiting for PIN2 input (Enter <pin> parameter only) (Indicates waiting Enters PUK1 while waiting for PUK1 input status for PIN1...
Page 585
Execution AT command Overview Parameter/Explanation example AT+GMM Displays abbreviated FOMA AT+GMMo terminal product name (FOMA FOMA SH906i ― SH906i) in alphanumeric characters. AT+GMR Displays FOMA terminal AT+GMRo version. Ver1.00 ― AT+IFC=<n,m> Sets local flow control format DCE by DTE (<n>)
Page 586
Execution AT command Overview Parameter/Explanation example Returns to online data mode from ATOo online command mode during CONNECT ― communication. ATQ<n> Sets whether to display result n=0: Displays result codes (default setting) ATQ0o codes. n=1: Does not display result codes ATV<n>...
Page 587
Execution AT command Overview Parameter/Explanation example ATS10=<n> Sets the delay time (seconds) for Sets a register, but has no other effect. ATS10=1o automatic disconnection n: 1 to 255 (default setting: n=1) (1/10 seconds). ATS30=<n> Disconnects when no data is sent/ Only valid during 64K data communications.
Page 588
Text display Reason “abc” (for <cid>=2) display AT+CGDCONT=2,“PPP”,“abc”o SIM not inserted FOMA card not inserted. SIM wrong A non-DoCoMo SIM (IC card equivalent to FOMA Operation when parameter is abbreviated card) is inserted. AT+CGDCONT= incorrect Password is incorrect. Clears all <cid> settings. Resets <cid>=1 and 3 password settings to default values.
Page 589
Command name: +CGEQMIN=[parameter] Execution examples Setting (1) is the initial setting for all cid. Overview (1) Command permitting all uplink/downlink Registers criterion determining whether to permit speeds (for <cid>=2) QoS (Quality of Service) sent from the network AT+CGEQMIN=2o when establishing PPP packet transmission. Not stored in FOMA terminal’s memory with (2) Command permitting uplink speeds of 384 AT&W commands.
Page 590
Command name: +CGEQREQ=[parameter] Execution example Setting (1) is set to each cid as initial setting. Overview (1) Command when requesting connection Sets QoS (Quality of Service) required of the without setting uplink/downlink speeds (for network when establishing PPP packet <cid>=2, Traffic class=2) transmission.
Result codes Note Result codes When [RESTRICTION] (Number: 100) appears, the transmission network is congested. Try connecting Numerical again later. Text display Meaning display Successfully executed. Communication protocol result codes CONNECT Connected to number dialed. Numerical Text display Meaning RING Call detected.
Page 593
Use four-digit kuten codes to enter kanji, hiragana, katakana, symbol, and alphanumeric characters. Each kuten code corresponds to a particular character. Refer to “Inputting Kuten Code” of the user’s guide for details. If an unregistered kuten code is entered, either a space or nothing will be entered. Some entries in the kuten code list may differ from on the screen.
Page 594
Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 肩...
Page 595
Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 枠...
Page 596
Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 浚...
Need help?
Do you have a question about the FOMA SH906i and is the answer not in the manual?
Questions and answers