Fitting Fiberglass Seat; Drain Plug - Quicksilver 8M920078R Owner's Manual

3.2 PADDLES
Paddles, when not in use, can be secured on the inner sides of
the craft with the specific attachments provided for this purpose.

4. FITTING FIBERGLASS SEAT

It is advisable to fit the seat before finishing the inflation of the tubes to the
maximum pressure. Once fitted, inflate to recommended pressure.

5. DRAIN PLUG

5.1 DECK SELF-BAILER
Ocean Runner craft are fitted with a standard self-bailer. Its operation is very simple. When underway,
remove the rubber plug and the water will automatically run out.
The inner diaphragm of the self-bailer will prevent the water from returning.
5.2 HULL DRAIN PLUG
The hull drain plug should be periodically removed to empty any water between deck
and hull, in semi-rigid craft.
To open, twist anticlockwise. To close twist clockwise.
Never open hull drain plugs when afloat.
- 5 -