Advanced Features - Panasonic KX-FPC165 Operating Instructions Manual

Features Summary
Advanced features!
How to set menu options
1. Press MENU .
2. Press or
displayed,
Display:
then press SET
until the desired feature is displayed.
Programming table
Code Feature & Display
Setting the journal report to print
automatically
#22
AUTO JOURNAL
MODE=ON
Sending document overseas
OVERSEAS MODE
MODE=ERROR
If you have difficulty sending an
overseas fax, activate this feature
#23
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
Sending a fax at a specified time
DELAYED SEND
MODE=OFF
This feature allows you to take
advantage of low-cost calling hours
offered by your telephone
#25
company.
The setting can be reserved to
take place up to 24 hours in
advance.
Setting the Caller ID list to print
automatically
#26
AUTO CALL. LIST
MODE=ON
82
until the following is
ADVANCED MODE
PRESS SET
and press or
[±]
[±]
[±]
[±]
3. Press or
is displayed.
4. Press SET
5. Press MENU
Note:
Step 3 may be slightly different depending on the
feature.
See page 79 for more details.
Settings
"ON": The unit will print the journal
ON
report automatically after every 30
new fax communications (p. 44).
OFF
"NEXT FAX": This setting is effective
only for the next attempted fax
NEXT FAX
transmission. After transmission, the
unit will return to the previous setting.
"ERROR": When the previous fax
ERROR
transmission fails and you redial
the same number.
This feature is not available for
broadcast transmission.
OFF
The calling charge may be higher.
To send a document:
1. Insert the document.
ON /
2. Follow steps 1 and 2 above.
fax no. /
3. Press
hh:mm
4. Press
5. Enter the fax number.
6. Press
7. Enter the transmission start time.
Press
8. Press
OFF
9. Press
To cancel after programming,
press
"ON": The unit will print the Caller
ON
ID list automatically after every 30
new calls (p. 35).
OFF
(The default setting is in bold type.)
until the desired setting
.
.
How the unit operates
to select "ON".
or
.
SET
.
SET
to select "AM" or "PM".
.
SET
.
MENU
then
STOP SET
.