Panasonic KX-FPC165 Operating Instructions Manual page 87

Code Feature & Display
Setting the incoming message
monitor
ICM MONITOR
MODE=ON
#67
To hear an incoming message
(ICM) from the speaker when the
answering device is recording the
message.
Signaling your pager
PAGER CALL
MODE=OFF
#70
If you have a pager and wish to
know when your unit receives a fax
or an incoming message, activate
this feature.
Setting the connecting tone
CONNECTING TONE
MODE=ON
If you often have trouble when
#76
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
Changing the receive mode in
the AUTO ANSWER setting
AUTO ANSWER
#77
MODE=TAD/FAX [±]
Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2
#78
If you use an extension telephone
in TEL/FAX mode, select the
desired number of rings of the
extension telephone.
Resetting on advanced features
to their default settings
SET DEFAULT
#80
RESET=NO
Settings
ON
[±]
OFF
ON
[±]
OFF
ON
[±]
OFF
TAD/FAX
FAX ONLY
TEL/FAX
[±]
1, 2, 3, 4
YES
[±]
NO
(The default setting is in bold type.)
Features Summary
How the unit operates
If you select "OFF", you cannot
monitor the incoming message.
See page 57 for details.
You can confirm the status of the
other party's machine.
If the ring back tone continues, the
other party's machine may not be
a facsimile or may have run out of
paper. Check with the other party.
The connecting tone volume
cannot be adjusted.
"TAD/FAX": Telephone Answering
Device/Facsimile mode (p. 62)
"FAX ONLY": Facsimile only mode
(p. 53)
"TEL/FAX": Telephone/Facsimile
mode (p. 54, 55)
See pages 54 and 55 for details.
1. Follow steps 1 and 2 on page 86.
2. Press
or
"YES".
3. Press
SET
4. Press
SET
5. Press
MENU
to select
.
again.
.
87