Listening To Recorded Messages Using The Base Unit - Panasonic KX-FPC165 Operating Instructions Manual

Voice Mailbox
Listening to recorded messages using
the base unit!
1
Press 2 times.
Display:
2
Press or
number is displayed.
Example:
3 Press
PLAY MESSAGES
If you have programmed your own mailbox
password, enter it.
Only the new recorded messages will be
played.
If there are no new messages, the unit will
play back all the recorded messages.
4
Press
STOP
To record a memo message into a mailbox
1. Press 2 times.
Display:
2. Press or until the desired mailbox
number is displayed.
Example:
3. Press .
RECORD
A long beep will sound.
Example:
4. Speak clearly about 20 cm (8 inches) away from
the microphone.
5. When finished recording, press
74
MAILBOX [+
until the desired mailbox
NEW MESSAGES
_
MAILBOX2 [±]
_
PRESS
REC/ERASE/PLAY
.
PASSWORD=
to end the operation.
MAILBOX [+ -]
_
MAILBOX1 [±] 00
_ _
PRESS
REC/ERASE/PLAY
BOX1 RECORDING
STOP
.
-]
_
RECORD
02
_
PLAY MESSAGES
Note:
The following features can be used during
playback. See page 66 for details.
– To repeat a message
– To skip a message
– To stop playback
– To change the playback speed
– To erase a specific message
To erase all the messages in a mailbox
1. Press
2. Press
number is displayed.
Example:
3. Press ERASE
4. Press
SET
ERASE
SET
2 times.
or until the desired mailbox
MAILBOX1 [±]
_
PRESS
REC/ERASE/PLAY
.
BOX1 ERASE OK?
YES:SET/NO:STOP
.
STOP
01
_