Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
1. Press
MENU
.
2. Press
or
displayed,
Display:
then press
SET
until the desired feature is displayed.
Programming table (cont.)
Code
Feature & Display
Changing the display contrast
#39
LCD CONTRAST
MODE=NORMAL
Changing the fax activation code
FAX ACTIVATION
MODE=ON
If you use an extension telephone
#41
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 56).
Setting the message alert
MESSAGE ALERT
#42
MODE=OFF
To alert you with beeps when a
new voice message is recorded.
Setting the recording time alert
REC. TIME ALERT
MODE=OFF
#43
To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
84
(cont.)
until the following is
ADVANCED MODE
PRESS SET
and press
or
[±]
[±]
[±]
[±]
!
3. Press
or
is displayed.
4. Press
SET
5. Press
MENU
Note:
Step 3 may be slightly different depending on the
feature.
See page 79 for more details.
Settings
"NORMAL": For normal contrast
NORMAL
"DARKER": Used when the display
contrast is too light.
DARKER
1. Follow steps 1 and 2 above.
2. Press
ON /
CODE=
9
3. Press
4. Enter your code from 2 to 4 digits,
using 0–9 and
5. Press
OFF
6. Press
Do not enter "0000".
If you hear slow beeps, press
ON
PLAY MESSAGES
recorded messages (p. 66). The
beeps will stop.
OFF
If you hear slow beeps, erase the
recorded messages (p. 66, 67, 74).
ON
The beeps will stop.
OFF
(The default setting is in bold type.)
until the desired setting
.
.
How the unit operates
to select "ON".
or
.
SET
.
.
SET
.
MENU
and listen to
Hide quick links:
Advertisement
Table of Contents
