Remote Operation
Listening to recorded messages
1
Call your unit from a remote touch tone telephone.
2
Enter the remote operation ID during TAD/FAX greeting playback.
When there are new messages
The voice guide will tell you the number of
new messages and they will be played
automatically.
Voice guide example:
3 new messages.
To repeat a message:
Press
.
1
If you press
beginning of a message, the previous
message will be played.
To skip a message:
2
Press
.
To repeat only the new messages:
4
Press
.
To listen to all the messages:
Press
5
.
1. Call your unit.
2. Enter the remote operation
ID
greeting message.
The new messages will be
played automatically.
If there are no new
messages, wait for 4
seconds. All the messages
will be played back.
3. Press the remote command
key(s) within 10 seconds.
Key
0
1
2
70
1
within 5 seconds of the
Answering Device Remote Operation
during the
Remote command
Skips the greeting message
Repeats a message
Skips a message
When there are no new
messages
No new messages.
5
Press
or wait for 4 seconds to listen to
all the messages.
When voice memory is full
Sorry, no more memory.
Please erase unnecessary
messages.
Erase some or all of the messages (p. 71).
Key
Remote command
New message playback
4
All message playback
5
Room monitor
6
Re-records a greeting
7
message
Stops re-recording of a
9
greeting message
Erases a specific message
4
Erases all messages
5
Changes to TEL mode
8 0
Turns ON message transfer
8 1
Turns OFF message transfer
8 2
Turns ON pager call
8 3
Turns OFF pager call
8 4