Voice Contact; Talking To The Other Party After Fax Transmission Or Reception - Panasonic KX-FPC165 Operating Instructions Manual

Voice Contact

Talking to the other party after fax transmission
or reception!
You can talk to the other party after a fax message is completed. This will save the added
expense and time of making another call.
This feature only works when the other party's fax machine is equipped with a voice
contact feature.
Initiating voice contact
1 Press DIGITAL SP-PHONE
transmitting or receiving documents.
Example:
Your unit will call the other party with a
distinctive ring.
When the other party answers, your unit
will emit a distinctive ring.
2 To start talking:
DIGITAL SP-PHONE
— press
— lift the handset from the base unit, or
— press TALK
Note:
If you initiate voice contact during transmission, the
unit will call you with a distinctive ring after all of the
documents have been transmitted.
If you initiate voice contact during reception, the unit
will call you with a distinctive ring after the current
page of the document is received.
Receiving a request for voice contact
1 If the other party initiates voice contact, your
unit will sound a distinctive ring and the
following will be displayed.
Base unit display:
To start talking:
2
— press DIGITAL SP-PHONE
— lift the handset from the base unit, or
— press TALK
within 10 seconds of the distinctive ring.
42
while
SENDING P 1
VOICE STANDBY
,
on the handset.
PLEASE PICK UP
,
on the handset,
DIGITAL SP-PHONE
TALK
Note:
If you do not answer within 10 seconds of the
distinctive ring;
— in TAD/FAX mode, your unit will play a
greeting message and record an incoming
voice message.
— in FAX ONLY, TEL or TEL/FAX mode, the
line will be disconnected.