Table of Contents
Advertisement
Listening to recorded messages using the base
When the unit has recorded new voice messages:
— the PLAY MESSAGES indicator will flash,
— the call counter will show the total number of recorded messages, and
— slow beeps will sound if the message alert feature is activated (feature #42 on page 72).
Example:
Press LM.
Only the new recorded messages will be
played.
Adjust the speaker volume using + or
-.
After playing back all of the new messages,
the PLAY MESSAGES indicator will stop
flashing but will remain lit up.
If you press LM at this
time, all the recorded messages will be
played.
To repeat a message
Press ( while listening to the message.
If you press ( within 5 seconds of the
beginning of the message, the previous
message will be played.
To play back a specific message, press ( or
) and search for the message you want to
listen to.
To skip a message
Press ) to play the next message.
To stop playback
Press {.
If you press LM within 1 minute,
the unit will resume playing the rest of the
messages.
Voice time/day stamp
During playback, a synthesized voice will
announce the time and day of the week that each
message was recorded.
Incoming Messages
02
Call counter
SLOW
QUICK ERASE
To change the playback speed
Press } to play messages at one and a half
times the original speed.
Press x to play messages at half the
original speed.
To return to the original speed, press } or
x again during quick or slow playback.
To erase a specific message
Press h while listening to the message you
want to erase.
To erase all the messages
Check that you have listened to all of the recorded
messages.
1. Press h.
2. Press w
3. Press w.
Messages recorded in voice mailbox will not be
erased.
PLAY MESSAGES
FLASH/LIGHT
SET
ALL MESSAGES
Display:
.
ERASE MESSAGES?
YES:SET/NO:STOP
unit!
STOP
PRESS SET
57
Advertisement
Table of Contents
