Add A Mode - NETGEAR Arlo Wire-Free User Manual

Add a Mode

You can add new modes to tell your camera what to do in certain situations. For
example, you can set your camera to record videos when the motion sensor is
activated and to alert you with an email message.
You can use the rules you create within modes and schedules to customize your
camera. You can create one rule for each mode.
¾ To add a mode for a camera:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the camera.
4. Click or tap Add a Mode.
The New Mode page displays.
5. Enter a name for the mode and click or tap Next.
The Trigger Device page displays.
6. Click or tap When motion is detected and then click or tap Next.
The Motion Settings page displays.
7. Enter the detection settings and the detection choices for the rule.
You can use the sliders to adjust the sensitivity of the motion sensor:
• Raise the sensitivity percentage to increase the number of videos that Arlo
captures.
• Lower the sensitivity percentage to decrease the number of videos that Arlo
captures.
8. Click or Tap Next.
The Motion Settings page displays.
Modes, Rules, and Smart Alerts
on your mobile device.
arlo.netgear.com
38
in the address bar of a